Benchmark #27585 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SB32G)
A1 C10
#159 / 1,701
114
#1,400 / 1,701
#253 / 405
1,074
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-21 06:11:37
#27,585
1,145
+71 (+6.20%)
goicovici
Sandisk Extreme 16GB on Pi 4

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SB32G)
A1 C10
15.9G
SD
SanDisk
SB32G
SDHC
5.00
0x03
SD
8.0
03/2018
Class 10
A1
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
15.3 MB/s
40.79 MB/s
40.58 MB/s
921 IOPS
3,204 IOPS
3,687 KB/s
12,818 KB/s
10,043 KB/s
3,521 KB/s
8,633 KB/s
2,906 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 355.9 MiB (8.9%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.7x15.0") s-diag: 777mm (30.6") Monitor-1: HDMI-1 res: 2560x1440 hz: 60 dpi: 109 size: 597x336mm (23.5x13.2") diag: 685mm (27") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 29.72 GiB used: 6.08 GiB (20.5%) ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 15.86 GiB size: 15.49 GiB (97.64%) used: 5.86 GiB (37.9%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 label: root uuid: 42c87be1-6002-4cd9-8ae1-d9ffbda08203 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 037C-9EB5 ID-3: /media/pi/Storage raw size: 10.71 GiB size: 10.42 GiB (97.26%) used: 26.8 MiB (0.3%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p9 label: Storage uuid: e8915f71-9cc6-4d31-bb3f-369a33498d54 ID-4: /media/pi/System raw size: 512.0 MiB size: 511.7 MiB (99.95%) used: 145.3 MiB (28.4%) fs: vfat block size: 512 B dev: /dev/mmcblk0p8 label: System uuid: 3743-920E Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 2.36 GiB fs: vfat label: RECOVERY uuid: EC92-402E ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: e886d736-14cd-4652-8933-6755aaa2f32c USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c534 Device-2: 1-1.4:4 info: Microsoft Wired Keyboard 600 (model 1576) type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 045e:07f8 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 168 1: cpu: 1.5% command: xorg pid: 518 mem: 46.1 MiB (1.1%) 2: cpu: 0.7% command: init pid: 1 mem: 8.09 MiB (0.2%) 3: cpu: 0.6% command: lxterminal pid: 929 mem: 49.5 MiB (1.2%) 4: cpu: 0.4% command: [kworker/u8:2-events_unbound] pid: 127 mem: 0.00 MiB (0.0%) 5: cpu: 0.4% command: lxpanel pid: 667 mem: 29.2 MiB (0.7%) Memory top: 5 of 168 1: mem: 49.5 MiB (1.2%) command: lxterminal pid: 929 cpu: 0.6% 2: mem: 46.1 MiB (1.1%) command: xorg pid: 518 cpu: 1.5% 3: mem: 29.2 MiB (0.7%) command: lxpanel pid: 667 cpu: 0.4% 4: mem: 29.1 MiB (0.7%) command: rpdiags.txt started by: mousepad pid: 9601 cpu: 0.1% 5: mem: 28.0 MiB (0.7%) command: agnostics pid: 9561 cpu: 0.3% Info: Processes: 168 Uptime: 16m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet 
           splash plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 355.9 MiB (8.9%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.7x15.0") 
           s-diag: 777mm (30.6") 
           Monitor-1: HDMI-1 res: 2560x1440 hz: 60 dpi: 109 size: 597x336mm (23.5x13.2") 
           diag: 685mm (27") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 29.72 GiB used: 6.08 GiB (20.5%) 
           ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 15.86 GiB size: 15.49 GiB (97.64%) used: 5.86 GiB (37.9%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p7 label: root 
           uuid: 42c87be1-6002-4cd9-8ae1-d9ffbda08203 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 037C-9EB5 
           ID-3: /media/pi/Storage raw size: 10.71 GiB size: 10.42 GiB (97.26%) 
           used: 26.8 MiB (0.3%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p9 label: Storage 
           uuid: e8915f71-9cc6-4d31-bb3f-369a33498d54 
           ID-4: /media/pi/System raw size: 512.0 MiB size: 511.7 MiB (99.95%) 
           used: 145.3 MiB (28.4%) fs: vfat block size: 512 B dev: /dev/mmcblk0p8 label: System 
           uuid: 3743-920E 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 2.36 GiB fs: vfat label: RECOVERY uuid: EC92-402E 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: e886d736-14cd-4652-8933-6755aaa2f32c 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c534 
           Device-2: 1-1.4:4 info: Microsoft Wired Keyboard 600 (model 1576) type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 045e:07f8 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 168 
           1: cpu: 1.5% command: xorg pid: 518 mem: 46.1 MiB (1.1%) 
           2: cpu: 0.7% command: init pid: 1 mem: 8.09 MiB (0.2%) 
           3: cpu: 0.6% command: lxterminal pid: 929 mem: 49.5 MiB (1.2%) 
           4: cpu: 0.4% command: [kworker/u8:2-events_unbound] pid: 127 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.4% command: lxpanel pid: 667 mem: 29.2 MiB (0.7%) 
           Memory top: 5 of 168 
           1: mem: 49.5 MiB (1.2%) command: lxterminal pid: 929 cpu: 0.6% 
           2: mem: 46.1 MiB (1.1%) command: xorg pid: 518 cpu: 1.5% 
           3: mem: 29.2 MiB (0.7%) command: lxpanel pid: 667 cpu: 0.4% 
           4: mem: 29.1 MiB (0.7%) command: rpdiags.txt started by: mousepad pid: 9601 cpu: 0.1% 
           5: mem: 28.0 MiB (0.7%) command: agnostics pid: 9561 cpu: 0.3% 
Info:      Processes: 168 Uptime: 16m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #27585 - Brand: SanDisk SD Ultra A1 (SB32G)