Benchmark #27656 - pibenchmarks.com

Brand: Intenso Top M.2 SSD
SSD (M.2 SATA)
#127 / 1,679
142
#440 / 1,679
#425 / 984
#38 / 115
7,448
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-22 09:17:13
#27,656
5,846
-1,602 (-27.40%)
Iliask
Raspberry Pi 4 Model B Rev 1.1 with SSD INTENSO 128GB M.2 2280 SATA 3 & RAIDSONIC ICY BOX IB-183M2 EXTERNAL USB 3.0 ENCLOSURE FOR M.2 SSD

Storage Details
Intenso Top M.2 SSD
SSD (M.2 SATA)
128G
SSD
Intenso
SSDSATAIII
M.2
SATA
3.00
5,000
1d6b:1576
0x1d6b (Linux Foundation)
0x1576 (External Disk 3.0)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
191 MB/s
206.36 MB/s
195.51 MB/s
3,039 IOPS
2,206 IOPS
12,159 KB/s
8,826 KB/s
23,044 KB/s
18,637 KB/s
15,485 KB/s
24,626 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:1576:u,152d:0567:u,0bc2:ab45:u,0bc2:ab38:u,0bc2:ab44:u console=ttyS0,115200 console=tty1 root=PARTUUID=8d3f7bf4-2bda-504b-bbb3-ebb7287f4f4f rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 1.05 GiB (27.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 319x63 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: br-7b247855146f state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: eth0 state: down mac: IF-ID-4: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-5: veth20ec390 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth2e505e4 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth54af331 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth6da708d state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth727c44e state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: veth7504bb0 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: veth8fcf5cf state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: veth904ab4c state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: vetha333ddb state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: vethf60acdc state: up speed: 10000 Mbps duplex: full mac: IF-ID-15: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 5.59 TiB used: 3.94 TiB (70.6%) ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Intenso model: SSD SATAIII size: 119.24 GiB block size: physical: 512 B logical: 512 B rev: 0204 scheme: GPT SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-3: /dev/sdb type: USB vendor: Seagate model: ST6000DM003-2CY186 size: 5.46 TiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 5425 rpm rev: D781 drive rev: 0001 temp: 46 C scheme: GPT SMART: yes state: enabled health: PASSED on: 1y 196d 10h cycles: 144 read: 16.19 TiB written: 4.95 TiB Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 119.24 GiB size: 116.87 GiB (98.01%) used: 11.87 GiB (10.2%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 26496f3c-1c4d-477c-b6e8-6ce718182305 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 592B-C92C ID-3: /mnt/Seagate raw size: 5.46 TiB size: 5.46 TiB (100.00%) used: 3.92 TiB (71.8%) fs: ntfs block size: 4096 B dev: /dev/sdb2 label: Seagate 6TB uuid: C610F94F10F946C9 ID-4: /var/lib/docker/overlay2/20739eac418d10ee56b40387d628c2bc8a99b7aa660fcc12d9b8c6e184c165ed/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/2594aa687e870349699feef7ee2252ae57ed33da926956120cd9c36ce05102cc/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/2a9e97f11a71526b2b1176c8b30c976f1ba7881c7fe35f297477c5741f7094dd/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/34745e51f86e2fccb9fad29e1d47dcf7051c04cc117a467db7d0cbd8582e956a/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/40c87b689725d11b2cb423ac7a47107086d537e4aac91c8bff97fd9d56b75e2e/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-9: /var/lib/docker/overlay2/43fd106388a151bffaad06e8c01d512e70ad4aff994c7647b2760ead65f9f3a1/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-10: /var/lib/docker/overlay2/5680aa31d9f89efa02686c5c00821b7ce7e793568cc349e2c1e91b1ab28f3642/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-11: /var/lib/docker/overlay2/5943233be802534af8e3fb2f3ae80f6412a37307bf9df794e7d018f372b4446b/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-12: /var/lib/docker/overlay2/7c0084fde21ce35733f91ac5e412c43768e48d4a58ff9087151b414b11e54471/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-13: /var/lib/docker/overlay2/9e96ec9443f0265afe213c6d89c664cfdff3f8dc4e097c02c2d6f83311d2f3e4/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-14: /var/lib/docker/overlay2/a0b52ead7e7212427c6aa839e5974828945712c699dec3b29a5dae1e591e3c50/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-15: /var/lib/docker/overlay2/ce0cffd50cd08ab1bec5f9c1afaad8c0b9e072b0ce7d1bdb5a46c310cf5d6d38/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-16: /var/lib/docker/overlay2/fda15ad3019c6dac9252e0eb41980f6659612021d0569e100cc2f8285518ea7e/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 97.9 MiB (97.9%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs uuid: 706944a6-7d0f-4a45-9f8c-7fb07375e9f7 ID-2: /dev/sdb1 size: 128.0 MiB fs: N/A label: N/A uuid: N/A USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.2:3 info: Seagate RSS LLC ports: 3 rev: 2.1 speed: 480 Mb/s chip ID: 0bc2:ab44 Device-1: 1-1.2.3:5 info: QinHeng HL-340 USB-Serial adapter type: driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7523 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1576 Hub: 2-2:3 info: Seagate RSS LLC ports: 3 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab45 Device-1: 2-2.1:4 info: Seagate RSS LLC Backup Plus Hub type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0bc2:ab38 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https: //repos.influxdata.com/debian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 226 1: cpu: 5.9% command: python3 pid: 12338 mem: 128.6 MiB (3.2%) 2: cpu: 3.4% command: plex pid: 4431 mem: 102.3 MiB (2.6%) 3: cpu: 2.5% command: plex pid: 10461 mem: 196.0 MiB (5.0%) 4: cpu: 2.2% command: influxd pid: 4260 mem: 112.1 MiB (2.8%) 5: cpu: 2.1% command: sdb2 started by: mount.ntfs pid: 512 mem: 3.86 MiB (0.0%) Memory top: 5 of 226 1: mem: 196.0 MiB (5.0%) command: plex pid: 10461 cpu: 2.5% 2: mem: 128.6 MiB (3.2%) command: python3 pid: 12338 cpu: 5.9% 3: mem: 112.1 MiB (2.8%) command: influxd pid: 4260 cpu: 2.2% 4: mem: 102.3 MiB (2.6%) command: plex pid: 4431 cpu: 3.4% 5: mem: 45.6 MiB (1.1%) command: telegraf pid: 7534 cpu: 1.7% Info: Processes: 226 Uptime: 1d 8h 17m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 
           usb-storage.quirks=152d:1576:u,152d:0567:u,0bc2:ab45:u,0bc2:ab38:u,0bc2:ab44:u 
           console=ttyS0,115200 console=tty1 root=PARTUUID=8d3f7bf4-2bda-504b-bbb3-ebb7287f4f4f 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 1.05 GiB (27.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 319x63 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: br-7b247855146f state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: eth0 state: down mac:  
           IF-ID-4: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-5: veth20ec390 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth2e505e4 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth54af331 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: veth6da708d state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: veth727c44e state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: veth7504bb0 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: veth8fcf5cf state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-12: veth904ab4c state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-13: vetha333ddb state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-14: vethf60acdc state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-15: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 5.59 TiB used: 3.94 TiB (70.6%) 
           ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Intenso model: SSD SATAIII size: 119.24 GiB 
           block size: physical: 512 B logical: 512 B rev: 0204 scheme: GPT 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           ID-3: /dev/sdb type: USB vendor: Seagate model: ST6000DM003-2CY186 size: 5.46 TiB 
           block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s 
           rotation: 5425 rpm rev: D781 drive rev: 0001 temp: 46 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 1y 196d 10h cycles: 144 read: 16.19 TiB 
           written: 4.95 TiB Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 
           threshold: 97 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 119.24 GiB size: 116.87 GiB (98.01%) used: 11.87 GiB (10.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 26496f3c-1c4d-477c-b6e8-6ce718182305 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 592B-C92C 
           ID-3: /mnt/Seagate raw size: 5.46 TiB size: 5.46 TiB (100.00%) used: 3.92 TiB (71.8%) 
           fs: ntfs block size: 4096 B dev: /dev/sdb2 label: Seagate 6TB uuid: C610F94F10F946C9 
           ID-4: /var/lib/docker/overlay2/20739eac418d10ee56b40387d628c2bc8a99b7aa660fcc12d9b8c6e184c165ed/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/2594aa687e870349699feef7ee2252ae57ed33da926956120cd9c36ce05102cc/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/2a9e97f11a71526b2b1176c8b30c976f1ba7881c7fe35f297477c5741f7094dd/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/34745e51f86e2fccb9fad29e1d47dcf7051c04cc117a467db7d0cbd8582e956a/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/40c87b689725d11b2cb423ac7a47107086d537e4aac91c8bff97fd9d56b75e2e/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-9: /var/lib/docker/overlay2/43fd106388a151bffaad06e8c01d512e70ad4aff994c7647b2760ead65f9f3a1/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-10: /var/lib/docker/overlay2/5680aa31d9f89efa02686c5c00821b7ce7e793568cc349e2c1e91b1ab28f3642/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-11: /var/lib/docker/overlay2/5943233be802534af8e3fb2f3ae80f6412a37307bf9df794e7d018f372b4446b/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-12: /var/lib/docker/overlay2/7c0084fde21ce35733f91ac5e412c43768e48d4a58ff9087151b414b11e54471/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-13: /var/lib/docker/overlay2/9e96ec9443f0265afe213c6d89c664cfdff3f8dc4e097c02c2d6f83311d2f3e4/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-14: /var/lib/docker/overlay2/a0b52ead7e7212427c6aa839e5974828945712c699dec3b29a5dae1e591e3c50/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-15: /var/lib/docker/overlay2/ce0cffd50cd08ab1bec5f9c1afaad8c0b9e072b0ce7d1bdb5a46c310cf5d6d38/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-16: /var/lib/docker/overlay2/fda15ad3019c6dac9252e0eb41980f6659612021d0569e100cc2f8285518ea7e/merged raw size: N/A size: 116.87 GiB used: 11.87 GiB (10.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 97.9 MiB (97.9%) priority: -2 
           file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs 
           uuid: 706944a6-7d0f-4a45-9f8c-7fb07375e9f7 
           ID-2: /dev/sdb1 size: 128.0 MiB fs: N/A label: N/A uuid: N/A 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.2:3 info: Seagate RSS LLC ports: 3 rev: 2.1 speed: 480 Mb/s chip ID: 0bc2:ab44 
           Device-1: 1-1.2.3:5 info: QinHeng HL-340 USB-Serial adapter type:  
           driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7523 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1576 Hub: 2-2:3 info: Seagate RSS LLC ports: 3 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab45 
           Device-1: 2-2.1:4 info: Seagate RSS LLC Backup Plus Hub type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0bc2:ab38 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list 
           1: deb https: //repos.influxdata.com/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 226 
           1: cpu: 5.9% command: python3 pid: 12338 mem: 128.6 MiB (3.2%) 
           2: cpu: 3.4% command: plex pid: 4431 mem: 102.3 MiB (2.6%) 
           3: cpu: 2.5% command: plex pid: 10461 mem: 196.0 MiB (5.0%) 
           4: cpu: 2.2% command: influxd pid: 4260 mem: 112.1 MiB (2.8%) 
           5: cpu: 2.1% command: sdb2 started by: mount.ntfs pid: 512 mem: 3.86 MiB (0.0%) 
           Memory top: 5 of 226 
           1: mem: 196.0 MiB (5.0%) command: plex pid: 10461 cpu: 2.5% 
           2: mem: 128.6 MiB (3.2%) command: python3 pid: 12338 cpu: 5.9% 
           3: mem: 112.1 MiB (2.8%) command: influxd pid: 4260 cpu: 2.2% 
           4: mem: 102.3 MiB (2.6%) command: plex pid: 4431 cpu: 3.4% 
           5: mem: 45.6 MiB (1.1%) command: telegraf pid: 7534 cpu: 1.7% 
Info:      Processes: 226 Uptime: 1d 8h 17m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #27656 - Brand: Intenso Top M.2 SSD