Benchmark #27681 - pibenchmarks.com

Brand: Samsung PM830 mSATA Series
SSD (mSATA)
#326 / 1,665
34
#901 / 1,665
#856 / 977
#49 / 69
4,523
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.de Amazon.fr Amazon.it Amazon.sg

Overview
2020-06-22 12:59:25
#27,681
5,436
+913 (+16.80%)
Anonymous
pip install RPi.GPIO

Storage Details
Samsung PM830 mSATA Series
SSD (mSATA)
128G
SSD
Samsung
MZMPA128HMFU-000H1
SATA
174c:1153
0x174c (ASMedia Technology Inc.)
0x1153 (ASM1153 SATA 3Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
141 MB/s
195.23 MB/s
182.46 MB/s
6,064 IOPS
13,170 IOPS
24,258 KB/s
52,681 KB/s
25,472 KB/s
20,152 KB/s
10,509 KB/s
19,824 KB/s

inxi Results
System: Host: raspberrypi Kernel: 5.4.47-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=53074689-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Memory: RAM: total: 3.81 GiB used: 239.9 MiB (6.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 120x27 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.47-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: down mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X IP v6: fe80::42:aeff:fe17:549/64 scope: link IF-ID-2: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fd00::8a14:c697:fdd0:d0fa/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::8e94:7e45:7f99:30b5/64 scope: link IF-ID-3: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 88.74.X.X Drives: Local Storage: total: 119.24 GiB used: 6.60 GiB (5.5%) ID-1: /dev/sda type: USB vendor: Samsung model: MZMPA128HMFU-000H1 size: 119.24 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rev: AXM18H1Q temp: 40 C scheme: MBR SMART: yes state: enabled health: PASSED on: 232d 3h cycles: 1094 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 118.99 GiB size: 116.62 GiB (98.01%) used: 6.55 GiB (5.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: 636cd604-01e0-4863-8405-79d4cf91fb49 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.2 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/sda1 label: N/A uuid: AE90-E65F Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https://deb.nodesource.com/node_12.x buster main 2: deb-src https://deb.nodesource.com/node_12.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 139 1: cpu: 1.5% command: init pid: 1 mem: 7.82 MiB (0.2%) 2: cpu: 0.6% command: haveged pid: 304 mem: 4.20 MiB (0.1%) 3: cpu: 0.5% command: bash pid: 2085 mem: 2.79 MiB (0.0%) 4: cpu: 0.3% command: [kworker/0:2-events] pid: 69 mem: 0.00 MiB (0.0%) 5: cpu: 0.3% command: systemd-journald pid: 118 mem: 7.14 MiB (0.1%) Memory top: 5 of 139 1: mem: 32.7 MiB (0.8%) command: containerd pid: 614 cpu: 0.2% 2: mem: 7.82 MiB (0.2%) command: init pid: 1 cpu: 1.5% 3: mem: 7.14 MiB (0.1%) command: systemd-journald pid: 118 cpu: 0.3% 4: mem: 6.48 MiB (0.1%) command: systemd pid: 755 cpu: 0.1% 5: mem: 6.04 MiB (0.1%) command: sshd: pid: 749 cpu: 0.1% Info: Processes: 139 Uptime: 4m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.1.03

inxi Results

System:    Host: raspberrypi Kernel: 5.4.47-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           snd_bcm2835.enable_headphones=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=53074689-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait 
           Console: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Memory:    RAM: total: 3.81 GiB used: 239.9 MiB (6.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 
           model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 120x27 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k5.4.47-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: down mac: XX:XX:XX:XX:XX:XX 
           IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X 
           IP v6: fe80::42:aeff:fe17:549/64 scope: link 
           IF-ID-2: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fd00::8a14:c697:fdd0:d0fa/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::8e94:7e45:7f99:30b5/64 scope: link 
           IF-ID-3: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 88.74.X.X 
Drives:    Local Storage: total: 119.24 GiB used: 6.60 GiB (5.5%) 
           ID-1: /dev/sda type: USB vendor: Samsung model: MZMPA128HMFU-000H1 size: 119.24 GiB block size: 
           physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rev: AXM18H1Q temp: 40 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 232d 3h cycles: 1094 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 118.99 GiB size: 116.62 GiB (98.01%) used: 6.55 GiB (5.6%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: N/A uuid: 636cd604-01e0-4863-8405-79d4cf91fb49 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.2 MiB (21.1%) fs: vfat 
           block size: 512 B dev: /dev/sda1 label: N/A uuid: AE90-E65F 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: uas interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https://deb.nodesource.com/node_12.x buster main
           2: deb-src https://deb.nodesource.com/node_12.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 139 
           1: cpu: 1.5% command: init pid: 1 mem: 7.82 MiB (0.2%) 
           2: cpu: 0.6% command: haveged pid: 304 mem: 4.20 MiB (0.1%) 
           3: cpu: 0.5% command: bash pid: 2085 mem: 2.79 MiB (0.0%) 
           4: cpu: 0.3% command: [kworker/0:2-events] pid: 69 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.3% command: systemd-journald pid: 118 mem: 7.14 MiB (0.1%) 
           Memory top: 5 of 139 
           1: mem: 32.7 MiB (0.8%) command: containerd pid: 614 cpu: 0.2% 
           2: mem: 7.82 MiB (0.2%) command: init pid: 1 cpu: 1.5% 
           3: mem: 7.14 MiB (0.1%) command: systemd-journald pid: 118 cpu: 0.3% 
           4: mem: 6.48 MiB (0.1%) command: systemd pid: 755 cpu: 0.1% 
           5: mem: 6.04 MiB (0.1%) command: sshd: pid: 749 cpu: 0.1% 
Info:      Processes: 139 Uptime: 4m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Shell: Storage.sh (sudo) inxi: 3.1.03

Benchmark #27681 - Brand: Samsung PM830 mSATA Series