Benchmark #27694 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#3 / 1,700
1,827
#369 / 1,700
#356 / 989
#35 / 370
8,235
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-22 13:53:04
#27,694
2,252
-5,983 (-265.67%)
Anonymous

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
240G
SSD
SanDisk
SSDPLUS240GB
2.5 inch
SATA
2.00
480
2109:1561
0x2109
0x1561
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Debian GNU/Linux bullseye/sid
armv7l

Benchmark Results
29 MB/s
30.92 MB/s
30.67 MB/s
3,144 IOPS
2,884 IOPS
12,579 KB/s
11,536 KB/s
12,366 KB/s
10,048 KB/s
8,732 KB/s
9,521 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:640x480M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=80a01168-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 DM: LightDM 1.26.0 Distro: Debian GNU/Linux bullseye/sid Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 352.6 MiB (8.9%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.8 driver: modesetting unloaded: fbdev tty: 86x37 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 223.58 GiB used: 3.63 GiB (1.6%) ID-1: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: SanDisk drive model: SSD PLUS 240GB family: Marvell based SSDs size: 223.58 GiB block size: physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0204 drive rev: UF4500RL temp: 35 C scheme: MBR SMART: yes state: enabled health: PASSED on: 196d 21h cycles: 198 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.32 GiB size: 218.82 GiB (97.98%) used: 3.58 GiB (1.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.0 MiB (20.6%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 70A2-8001 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:1561 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb [trusted=yes] http: //ftp.us.debian.org/debian sid main 3: deb-src [trusted=yes] http: //ftp.us.debian.org/debian sid main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 148 1: cpu: 1.2% command: xorg pid: 558 mem: 48.6 MiB (1.2%) 2: cpu: 0.6% command: init pid: 1 mem: 7.34 MiB (0.1%) 3: cpu: 0.6% command: [kworker/0:2-memcg_kmem_cache] pid: 74 mem: 0.00 MiB (0.0%) 4: cpu: 0.5% command: [kworker/u8:0-brcmf_wq/mmc1:0001:1] pid: 1021 mem: 0.00 MiB (0.0%) 5: cpu: 0.4% command: vncserver-x11-core pid: 496 mem: 16.9 MiB (0.4%) Memory top: 5 of 148 1: mem: 48.6 MiB (1.2%) command: xorg pid: 558 cpu: 1.2% 2: mem: 30.3 MiB (0.7%) command: lxpanel pid: 721 cpu: 0.3% 3: mem: 26.6 MiB (0.6%) command: applet.py started by: python3 pid: 742 cpu: 0.1% 4: mem: 22.3 MiB (0.5%) command: pcmanfm pid: 722 cpu: 0.1% 5: mem: 16.9 MiB (0.4%) command: vncserver-x11-core pid: 496 cpu: 0.4% Info: Processes: 148 Uptime: 7m Init: systemd v: 245 runlevel: 5 target: graphical.target Compilers: gcc: 9.3.0 alt: 9 Client: shell wrapper v: 5.0.16-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           video=HDMI-A-1:640x480M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=80a01168-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 DM: LightDM 1.26.0 Distro: Debian GNU/Linux bullseye/sid 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 352.6 MiB (8.9%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.8 driver: modesetting unloaded: fbdev tty: 86x37 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 223.58 GiB used: 3.63 GiB (1.6%) 
           ID-1: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: SanDisk 
           drive model: SSD PLUS 240GB family: Marvell based SSDs size: 223.58 GiB block size: 
           physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0204 drive rev: UF4500RL temp: 35 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 196d 21h cycles: 198 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.32 GiB size: 218.82 GiB (97.98%) used: 3.58 GiB (1.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.0 MiB (20.6%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 70A2-8001 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 152d:1561 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb [trusted=yes] http: //ftp.us.debian.org/debian sid main
           3: deb-src [trusted=yes] http: //ftp.us.debian.org/debian sid main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 148 
           1: cpu: 1.2% command: xorg pid: 558 mem: 48.6 MiB (1.2%) 
           2: cpu: 0.6% command: init pid: 1 mem: 7.34 MiB (0.1%) 
           3: cpu: 0.6% command: [kworker/0:2-memcg_kmem_cache] pid: 74 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.5% command: [kworker/u8:0-brcmf_wq/mmc1:0001:1] pid: 1021 
           mem: 0.00 MiB (0.0%) 
           5: cpu: 0.4% command: vncserver-x11-core pid: 496 mem: 16.9 MiB (0.4%) 
           Memory top: 5 of 148 
           1: mem: 48.6 MiB (1.2%) command: xorg pid: 558 cpu: 1.2% 
           2: mem: 30.3 MiB (0.7%) command: lxpanel pid: 721 cpu: 0.3% 
           3: mem: 26.6 MiB (0.6%) command: applet.py started by: python3 pid: 742 cpu: 0.1% 
           4: mem: 22.3 MiB (0.5%) command: pcmanfm pid: 722 cpu: 0.1% 
           5: mem: 16.9 MiB (0.4%) command: vncserver-x11-core pid: 496 cpu: 0.4% 
Info:      Processes: 148 Uptime: 7m Init: systemd v: 245 runlevel: 5 target: graphical.target 
           Compilers: gcc: 9.3.0 alt: 9 Client: shell wrapper v: 5.0.16-release inxi: 3.1.03

Benchmark #27694 - Brand: SanDisk SSD Plus