Benchmark #27699 - pibenchmarks.com

Brand: Western Digital Red 3.5" NAS HDD
HDD (3.5" SATA)
#427 / 1,672
21
#1,093 / 1,672
#25 / 68
#11 / 30
1,869
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-22 14:13:28
#27,699
3,250
+1,381 (+42.49%)
Anonymous
WDred

Storage Details
Western Digital Red 3.5" NAS HDD
HDD (3.5" SATA)
4000G
HDD
WDC
WD40EFAX-68JH4N0
3.5 inch
SATA
5,400
3.00
5,000
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
155 MB/s
85.88 MB/s
310.22 MB/s
203 IOPS
3,879 IOPS
813 KB/s
15,518 KB/s
30,888 KB/s
20,904 KB/s
22,678 KB/s
624 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "it_IT.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=f98158f5-1c9c-48c6-adea-dc39dadbc8bf rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.96 GiB used: 196.2 MiB (9.8%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 122x31 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: br-d9c7d25ca778 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-4: veth97d114c state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: wg0 state: unknown speed: N/A duplex: N/A mac: N/A IP v4: scope: global IF-ID-6: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 3.64 TiB used: 4.74 GiB (0.1%) ID-1: /dev/sda type: USB vendor: Western Digital model: WD40EFAX-68JH4N0 size: 3.64 TiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 5400 rpm rev: 82.00A82 temp: 34 C scheme: GPT SMART: yes state: enabled health: PASSED on: 14 hrs cycles: 29 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 18.63 GiB size: 14.36 GiB (77.07%) used: 2.35 GiB (16.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 706944a6-7d0f-4a45-9f8c-7fb07375e9f7 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 592B-C92C ID-3: /var/lib/docker/overlay2/4c4de49b614727a43d1dc13828015dbce4cca56a882916db83b6e74c829409c8/merged raw size: N/A size: 14.36 GiB used: 2.35 GiB (16.3%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 1 (default 60) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sda3 size: 3.62 TiB fs: ext4 label: WDred uuid: a2a6dee2-2059-4b7f-add1-84c2b17f5eb7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/pivpn-bullseye.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 126 1: cpu: 1.1% command: init pid: 1 mem: 8.00 MiB (0.4%) 2: cpu: 0.3% command: [kworker/0:4-events] pid: 83 mem: 0.00 MiB (0.0%) 3: cpu: 0.3% command: dockerd pid: 609 mem: 56.6 MiB (2.8%) 4: cpu: 0.2% command: [kworker/0:3-events_power_efficient] pid: 81 mem: 0.00 MiB (0.0%) 5: cpu: 0.2% command: systemd-udevd pid: 188 mem: 3.86 MiB (0.1%) Memory top: 5 of 126 1: mem: 56.6 MiB (2.8%) command: dockerd pid: 609 cpu: 0.3% 2: mem: 32.1 MiB (1.6%) command: containerd pid: 605 cpu: 0.0% 3: mem: 18.2 MiB (0.9%) command: /portainer pid: 880 cpu: 0.1% 4: mem: 15.5 MiB (0.7%) command: unattended-upgrade-shutdown started by: python3 pid: 595 cpu: 0.0% 5: mem: 14.6 MiB (0.7%) command: fail2ban-server started by: python3 pid: 597 cpu: 0.2% Info: Processes: 126 Uptime: 7m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LANG = "it_IT.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=tty1 
           root=PARTUUID=f98158f5-1c9c-48c6-adea-dc39dadbc8bf rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait 
           Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.96 GiB used: 196.2 MiB (9.8%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 122x31 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: br-d9c7d25ca778 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth97d114c state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: wg0 state: unknown speed: N/A duplex: N/A mac: N/A 
           IP v4:  scope: global 
           IF-ID-6: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 3.64 TiB used: 4.74 GiB (0.1%) 
           ID-1: /dev/sda type: USB vendor: Western Digital model: WD40EFAX-68JH4N0 size: 3.64 TiB 
           block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s 
           rotation: 5400 rpm rev: 82.00A82 temp: 34 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 14 hrs cycles: 29 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 18.63 GiB size: 14.36 GiB (77.07%) used: 2.35 GiB (16.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 706944a6-7d0f-4a45-9f8c-7fb07375e9f7 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 592B-C92C 
           ID-3: /var/lib/docker/overlay2/4c4de49b614727a43d1dc13828015dbce4cca56a882916db83b6e74c829409c8/merged raw size: N/A size: 14.36 GiB used: 2.35 GiB (16.3%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 1 (default 60) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/sda3 size: 3.62 TiB fs: ext4 label: WDred 
           uuid: a2a6dee2-2059-4b7f-add1-84c2b17f5eb7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/pivpn-bullseye.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 126 
           1: cpu: 1.1% command: init pid: 1 mem: 8.00 MiB (0.4%) 
           2: cpu: 0.3% command: [kworker/0:4-events] pid: 83 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.3% command: dockerd pid: 609 mem: 56.6 MiB (2.8%) 
           4: cpu: 0.2% command: [kworker/0:3-events_power_efficient] pid: 81 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.2% command: systemd-udevd pid: 188 mem: 3.86 MiB (0.1%) 
           Memory top: 5 of 126 
           1: mem: 56.6 MiB (2.8%) command: dockerd pid: 609 cpu: 0.3% 
           2: mem: 32.1 MiB (1.6%) command: containerd pid: 605 cpu: 0.0% 
           3: mem: 18.2 MiB (0.9%) command: /portainer pid: 880 cpu: 0.1% 
           4: mem: 15.5 MiB (0.7%) command: unattended-upgrade-shutdown started by: python3 
           pid: 595 cpu: 0.0% 
           5: mem: 14.6 MiB (0.7%) command: fail2ban-server started by: python3 pid: 597 cpu: 0.2% 
Info:      Processes: 126 Uptime: 7m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #27699 - Brand: Western Digital Red 3.5" NAS HDD