Benchmark #27779 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#2 / 1,539
1,343
#572 / 1,539
#551 / 875
#173 / 363
5,919
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-23 04:25:22
#27,779
7,160
+1,241 (+17.33%)
Anonymous
sandisk

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
120G
SSD
SanDisk
SDSSDA120G
2.5 inch
SATA
3.00
5,000
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
80 MB/s
319.22 MB/s
263.92 MB/s
10,813 IOPS
22,908 IOPS
43,252 KB/s
91,633 KB/s
31,619 KB/s
22,870 KB/s
17,561 KB/s
30,962 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=2fed7fee-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 848.0 MiB (21.3%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 120x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link IF-ID-3: hassio state: down mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: stable-privacy scope: link IF-ID-5: vethf548b78 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Drives: Local Storage: total: 3.75 TiB used: 729.24 GiB (19.0%) ID-1: /dev/sda type: USB vendor: Western Digital model: WD40EZRX-00SPEB0 family: Green size: 3.64 TiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rotation: 5400 rpm rev: 80.00A80 temp: 44 C scheme: GPT SMART: yes state: enabled health: PASSED on: 2y 182d 3h cycles: 4653 ID-2: /dev/sdb type: USB vendor: SanDisk model: SDSSDA120G family: Driven SSDs size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: Z32080RL temp: 62 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 116d 8h cycles: 517 read: 970 GiB written: 893 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.78 GiB (98.43%) used: 11.95 GiB (10.9%) fs: ext4 block size: 4096 B dev: /dev/sdb2 label: rootfs uuid: 706944a6-7d0f-4a45-9f8c-7fb07375e9f7 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) fs: vfat block size: 512 B dev: /dev/sdb1 label: boot uuid: 592B-C92C ID-3: /mnt/Intenso raw size: 3.64 TiB size: 3.58 TiB (98.40%) used: 705.29 GiB (19.2%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: Intenso uuid: df0ce168-e536-4bae-86cc-83532d39b0a7 ID-4: /mnt/dietpi_userdata/docker-data/overlay2/250cd152db8696c6b3f0a8cff5566f8b1aaa8b45a5e519c8a2381e91f6cdcc64/merged raw size: N/A size: 109.78 GiB used: 11.95 GiB (10.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Alert: No Swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.3:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0610 Device-1: 1-1.3.4:5 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0658:0200 Device-2: 1-1.4:43 info: Dresden Elektronik type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 1cf1:0030 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Device-2: 2-2:3 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 1: deb https: //downloads.plex.tv/repo/deb/ public main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb https: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 142 1: cpu: 11.2% command: jackett pid: 8324 mem: 97.3 MiB (2.4%) 2: cpu: 6.2% command: plex pid: 8323 mem: 31.5 MiB (0.7%) 3: cpu: 4.0% command: plex pid: 8993 mem: 28.8 MiB (0.7%) 4: cpu: 3.4% command: tvheadend pid: 8893 mem: 148.9 MiB (3.7%) 5: cpu: 1.5% command: deluged started by: python pid: 8221 mem: 33.5 MiB (0.8%) Memory top: 5 of 142 1: mem: 148.9 MiB (3.7%) command: tvheadend pid: 8893 cpu: 3.4% 2: mem: 97.3 MiB (2.4%) command: jackett pid: 8324 cpu: 11.2% 3: mem: 58.0 MiB (1.4%) command: dockerd pid: 8278 cpu: 0.9% 4: mem: 44.5 MiB (1.1%) command: plex pid: 8235 cpu: 1.5% 5: mem: 34.1 MiB (0.8%) command: containerd pid: 472 cpu: 0.1% Info: Processes: 142 Uptime: 26m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=0 
           bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=2fed7fee-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 
           Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.88 GiB used: 848.0 MiB (21.3%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 120x30 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: hassio state: down mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           IP v6:  virtual: stable-privacy scope: link 
           IF-ID-5: vethf548b78 state: up speed: 10000 Mbps duplex: full mac:  
           WAN IP:  
Drives:    Local Storage: total: 3.75 TiB used: 729.24 GiB (19.0%) 
           ID-1: /dev/sda type: USB vendor: Western Digital model: WD40EZRX-00SPEB0 family: Green 
           size: 3.64 TiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s 
           rotation: 5400 rpm rev: 80.00A80 temp: 44 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 2y 182d 3h cycles: 4653 
           ID-2: /dev/sdb type: USB vendor: SanDisk model: SDSSDA120G family: Driven SSDs 
           size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s 
           rev: Z32080RL temp: 62 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 116d 8h cycles: 517 read: 970 GiB 
           written: 893 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.78 GiB (98.43%) used: 11.95 GiB (10.9%) fs: ext4 
           block size: 4096 B dev: /dev/sdb2 label: rootfs 
           uuid: 706944a6-7d0f-4a45-9f8c-7fb07375e9f7 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) 
           fs: vfat block size: 512 B dev: /dev/sdb1 label: boot uuid: 592B-C92C 
           ID-3: /mnt/Intenso raw size: 3.64 TiB size: 3.58 TiB (98.40%) used: 705.29 GiB (19.2%) 
           fs: ext4 block size: 4096 B dev: /dev/sda1 label: Intenso 
           uuid: df0ce168-e536-4bae-86cc-83532d39b0a7 
           ID-4: /mnt/dietpi_userdata/docker-data/overlay2/250cd152db8696c6b3f0a8cff5566f8b1aaa8b45a5e519c8a2381e91f6cdcc64/merged raw size: N/A size: 109.78 GiB used: 11.95 GiB (10.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Alert: No Swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.3:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Device-1: 1-1.3.4:5 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s 
           chip ID: 0658:0200 
           Device-2: 1-1.4:43 info: Dresden Elektronik type: Abstract (modem),CDC-Data 
           driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 1cf1:0030 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Device-2: 2-2:3 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           1: deb https: //downloads.plex.tv/repo/deb/ public main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb https: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 142 
           1: cpu: 11.2% command: jackett pid: 8324 mem: 97.3 MiB (2.4%) 
           2: cpu: 6.2% command: plex pid: 8323 mem: 31.5 MiB (0.7%) 
           3: cpu: 4.0% command: plex pid: 8993 mem: 28.8 MiB (0.7%) 
           4: cpu: 3.4% command: tvheadend pid: 8893 mem: 148.9 MiB (3.7%) 
           5: cpu: 1.5% command: deluged started by: python pid: 8221 mem: 33.5 MiB (0.8%) 
           Memory top: 5 of 142 
           1: mem: 148.9 MiB (3.7%) command: tvheadend pid: 8893 cpu: 3.4% 
           2: mem: 97.3 MiB (2.4%) command: jackett pid: 8324 cpu: 11.2% 
           3: mem: 58.0 MiB (1.4%) command: dockerd pid: 8278 cpu: 0.9% 
           4: mem: 44.5 MiB (1.1%) command: plex pid: 8235 cpu: 1.5% 
           5: mem: 34.1 MiB (0.8%) command: containerd pid: 472 cpu: 0.1% 
Info:      Processes: 142 Uptime: 26m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #27779 - Brand: SanDisk SSD Plus