Benchmark #27805 - pibenchmarks.com

Brand: Kingston SSDNow V500
SSD (2.5" SATA)
#415 / 1,700
28
#822 / 1,700
#790 / 989
#252 / 370
5,367
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-23 09:04:01
#27,805
5,839
+472 (+8.08%)
Anonymous

Storage Details
Kingston SSDNow V500
SSD (2.5" SATA)
240G
SSD
Kingston
SUV500240G
SATA
3.00
5,000
1d6b:0578
0x1d6b (Linux Foundation)
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
181 MB/s
127.62 MB/s
149.28 MB/s
5,699 IOPS
5,007 IOPS
22,799 KB/s
20,029 KB/s
22,365 KB/s
17,028 KB/s
18,322 KB/s
20,892 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 usb-storage.quirks=152d:0578:u dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=cc283a0b-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait root=/dev/sda1 rootfstype=ext4 rootwait Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 345.0 MiB (8.7%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 272x56 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: br-abac29294ef1 state: down mac: IP v4: scope: global broadcast: IF-ID-2: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-4: wg0 state: unknown speed: N/A duplex: N/A mac: N/A IP v4: scope: global IF-ID-5: wlan0 state: down mac: WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 3.89 TiB used: 2.97 TiB (76.3%) ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic drive vendor: Kingston drive model: SUV500240G size: 223.57 GiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 0508 drive rev: 003056RA temp: 36 C scheme: GPT SMART: yes state: enabled health: PASSED on: 211d 9h cycles: 884 read: 2.49 TiB written: 2.20 TiB Old-Age: media wearout: 100 ID-3: /dev/sdb type: USB model: USB3.0 high speed size: 3.64 TiB block size: physical: 4096 B logical: 512 B rev: 2210 scheme: GPT SMART Message: A mandatory SMART command failed. Various possible causes. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.57 GiB size: 219.06 GiB (97.98%) used: 5.10 GiB (2.3%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 1d0e4f55-0327-4997-b56c-b4d66eca1510 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B ID-3: /mnt/wd4t raw size: 3.64 TiB size: 3.58 TiB (98.40%) used: 2.96 TiB (82.7%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A uuid: 9489995c-5662-414f-b541-a4c92bd03542 Swap: Kernel: swappiness: 80 (default 60) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap ID-2: swap-2 type: zram size: 750.0 MiB used: 0 KiB (0.0%) priority: 75 dev: /dev/zram0 Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Device-2: 2-2:3 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0711 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb http: //deb.debian.org/debian/ unstable main Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 1: deb https: //downloads.plex.tv/repo/deb public main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 128 1: cpu: 1.8% command: plex pid: 1064 mem: 31.0 MiB (0.7%) 2: cpu: 1.7% command: transmission-daemon pid: 643 mem: 17.6 MiB (0.4%) 3: cpu: 1.4% command: node-red pid: 380 mem: 75.3 MiB (1.9%) 4: cpu: 1.0% command: plex pid: 1356 mem: 28.7 MiB (0.7%) 5: cpu: 0.7% command: init pid: 1 mem: 8.07 MiB (0.2%) Memory top: 5 of 128 1: mem: 75.3 MiB (1.9%) command: node-red pid: 380 cpu: 1.4% 2: mem: 53.8 MiB (1.3%) command: dockerd pid: 635 cpu: 0.5% 3: mem: 46.5 MiB (1.1%) command: plex pid: 648 cpu: 0.7% 4: mem: 31.0 MiB (0.7%) command: plex pid: 1064 cpu: 1.8% 5: mem: 28.7 MiB (0.7%) command: plex pid: 1356 cpu: 1.0% Info: Processes: 128 Uptime: 8m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=0 
           bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 usb-storage.quirks=152d:0578:u dwc_otg.lpm_enable=0 
           console=ttyS0,115200 console=tty1 root=PARTUUID=cc283a0b-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait root=/dev/sda1 rootfstype=ext4 rootwait 
           Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.88 GiB used: 345.0 MiB (8.7%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 272x56 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: br-abac29294ef1 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: wg0 state: unknown speed: N/A duplex: N/A mac: N/A 
           IP v4:  scope: global 
           IF-ID-5: wlan0 state: down mac:  
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: 3.89 TiB used: 2.97 TiB (76.3%) 
           ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic drive vendor: Kingston 
           drive model: SUV500240G size: 223.57 GiB block size: physical: 4096 B logical: 512 B 
           sata: 3.1 speed: 6.0 Gb/s rev: 0508 
           drive rev: 003056RA temp: 36 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 211d 9h cycles: 884 read: 2.49 TiB 
           written: 2.20 TiB Old-Age: media wearout: 100 
           ID-3: /dev/sdb type: USB model: USB3.0 high speed size: 3.64 TiB block size: 
           physical: 4096 B logical: 512 B rev: 2210 scheme: GPT 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.57 GiB size: 219.06 GiB (97.98%) used: 5.10 GiB (2.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 1d0e4f55-0327-4997-b56c-b4d66eca1510 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
           ID-3: /mnt/wd4t raw size: 3.64 TiB size: 3.58 TiB (98.40%) used: 2.96 TiB (82.7%) 
           fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A 
           uuid: 9489995c-5662-414f-b541-a4c92bd03542 
Swap:      Kernel: swappiness: 80 (default 60) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
           ID-2: swap-2 type: zram size: 750.0 MiB used: 0 KiB (0.0%) priority: 75 dev: /dev/zram0 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 
           Device-2: 2-2:3 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 2109:0711 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb http: //deb.debian.org/debian/ unstable main
           Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           1: deb https: //downloads.plex.tv/repo/deb public main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 128 
           1: cpu: 1.8% command: plex pid: 1064 mem: 31.0 MiB (0.7%) 
           2: cpu: 1.7% command: transmission-daemon pid: 643 mem: 17.6 MiB (0.4%) 
           3: cpu: 1.4% command: node-red pid: 380 mem: 75.3 MiB (1.9%) 
           4: cpu: 1.0% command: plex pid: 1356 mem: 28.7 MiB (0.7%) 
           5: cpu: 0.7% command: init pid: 1 mem: 8.07 MiB (0.2%) 
           Memory top: 5 of 128 
           1: mem: 75.3 MiB (1.9%) command: node-red pid: 380 cpu: 1.4% 
           2: mem: 53.8 MiB (1.3%) command: dockerd pid: 635 cpu: 0.5% 
           3: mem: 46.5 MiB (1.1%) command: plex pid: 648 cpu: 0.7% 
           4: mem: 31.0 MiB (0.7%) command: plex pid: 1064 cpu: 1.8% 
           5: mem: 28.7 MiB (0.7%) command: plex pid: 1356 cpu: 1.0% 
Info:      Processes: 128 Uptime: 8m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #27805 - Brand: Kingston SSDNow V500