Benchmark #27808 - pibenchmarks.com

Brand: Transcend SSD200 Series
SSD (2.5" SATA)
#248 / 1,672
56
#723 / 1,672
#699 / 983
#207 / 370
5,793
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-23 09:43:37
#27,808
8,918
+3,125 (+35.04%)
Anonymous
Transcend SSD220 on Pi4 using SATA to USB adapter

Storage Details
Transcend SSD200 Series
SSD (2.5" SATA)
480G
SSD
Transcend
TS480GSSD220S
2.5 inch
SATA
3.00
5,000
1d6b:0562
0x1d6b (Linux Foundation)
0x0562 (Netac Portable SSD Z6s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
2,000 (+500)
600 (+100)
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
173 MB/s
1.06 MB/s
233.17 MB/s
14,566 IOPS
28,683 IOPS
58,264 KB/s
114,733 KB/s
31,889 KB/s
31,098 KB/s
18,539 KB/s
31,718 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=e22bcd10-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait loglevel=3 consoleblank=0 plymouth.enable=0 Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 244.8 MiB (6.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 959 Speed: 1333 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 1333 2: 1333 3: 1333 4: 1333 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x20 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 447.13 GiB used: 204.51 GiB (45.7%) ID-1: /dev/sda type: USB vendor: Transcend model: TS480GSSD220S size: 447.13 GiB block size: physical: 4096 B logical: 512 B rev: 0214 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 446.88 GiB size: 440.02 GiB (98.46%) used: 204.46 GiB (46.5%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: retropie uuid: 8988cf8f-d459-476f-9a4a-16c56702dc40 ID-2: /boot raw size: 256.0 MiB size: 255.7 MiB (99.89%) used: 51.6 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: C367-3F28 ID-3: /media/usb0 raw size: 256.0 MiB size: N/A (hidden?) used: N/A (hidden?) fs: vfat dev: /dev/sda1 label: boot uuid: C367-3F28 ID-4: /media/usb1 raw size: 446.88 GiB size: N/A (hidden?) used: N/A (hidden?) fs: ext4 dev: /dev/sda2 label: retropie uuid: 8988cf8f-d459-476f-9a4a-16c56702dc40 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.3:3 info: Microsoft Internet Keyboard Pro ports: 3 rev: 1.1 speed: 12 Mb/s chip ID: 045e:001c Device-1: 1-1.3.1:5 info: Microsoft Xbox Controller S type: Xbox driver: xpad interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 045e:0285 Device-2: 1-1.4:4 info: Logitech Y-UF49 [Internet Pro Keyboard] type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 046d:c311 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0562 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 133 1: cpu: 0.7% command: init pid: 1 mem: 7.78 MiB (0.1%) 2: cpu: 0.3% command: [kworker/u8:0-events_unbound] pid: 1019 mem: 0.00 MiB (0.0%) 3: cpu: 0.1% command: [kworker/0:1+events_freezable] pid: 31 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: [kworker/0:3-events] pid: 82 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: systemd-journald pid: 110 mem: 7.37 MiB (0.1%) Memory top: 5 of 133 1: mem: 16.3 MiB (0.4%) command: smbd pid: 871 cpu: 0.0% 2: mem: 8.89 MiB (0.2%) command: nmbd pid: 865 cpu: 0.0% 3: mem: 8.02 MiB (0.2%) command: argononed.py started by: python3 pid: 875 cpu: 0.0% 4: mem: 7.78 MiB (0.1%) command: init pid: 1 cpu: 0.7% 5: mem: 7.37 MiB (0.1%) command: systemd-journald pid: 110 cpu: 0.1% Info: Processes: 133 Uptime: 9m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=e22bcd10-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           loglevel=3 consoleblank=0 plymouth.enable=0 
           Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 244.8 MiB (6.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 959 
           Speed: 1333 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 1333 2: 1333 3: 1333 
           4: 1333 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x20 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 447.13 GiB used: 204.51 GiB (45.7%) 
           ID-1: /dev/sda type: USB vendor: Transcend model: TS480GSSD220S size: 447.13 GiB 
           block size: physical: 4096 B logical: 512 B rev: 0214 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 446.88 GiB size: 440.02 GiB (98.46%) used: 204.46 GiB (46.5%) 
           fs: ext4 block size: 4096 B dev: /dev/sda2 label: retropie 
           uuid: 8988cf8f-d459-476f-9a4a-16c56702dc40 
           ID-2: /boot raw size: 256.0 MiB size: 255.7 MiB (99.89%) used: 51.6 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: C367-3F28 
           ID-3: /media/usb0 raw size: 256.0 MiB size: N/A (hidden?) used: N/A (hidden?) fs: vfat 
           dev: /dev/sda1 label: boot uuid: C367-3F28 
           ID-4: /media/usb1 raw size: 446.88 GiB size: N/A (hidden?) used: N/A (hidden?) fs: ext4 
           dev: /dev/sda2 label: retropie uuid: 8988cf8f-d459-476f-9a4a-16c56702dc40 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.3:3 info: Microsoft Internet Keyboard Pro ports: 3 rev: 1.1 speed: 12 Mb/s 
           chip ID: 045e:001c 
           Device-1: 1-1.3.1:5 info: Microsoft Xbox Controller S type: Xbox driver: xpad 
           interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 045e:0285 
           Device-2: 1-1.4:4 info: Logitech Y-UF49 [Internet Pro Keyboard] type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 046d:c311 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0562 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 133 
           1: cpu: 0.7% command: init pid: 1 mem: 7.78 MiB (0.1%) 
           2: cpu: 0.3% command: [kworker/u8:0-events_unbound] pid: 1019 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.1% command: [kworker/0:1+events_freezable] pid: 31 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.1% command: [kworker/0:3-events] pid: 82 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: systemd-journald pid: 110 mem: 7.37 MiB (0.1%) 
           Memory top: 5 of 133 
           1: mem: 16.3 MiB (0.4%) command: smbd pid: 871 cpu: 0.0% 
           2: mem: 8.89 MiB (0.2%) command: nmbd pid: 865 cpu: 0.0% 
           3: mem: 8.02 MiB (0.2%) command: argononed.py started by: python3 pid: 875 cpu: 0.0% 
           4: mem: 7.78 MiB (0.1%) command: init pid: 1 cpu: 0.7% 
           5: mem: 7.37 MiB (0.1%) command: systemd-journald pid: 110 cpu: 0.1% 
Info:      Processes: 133 Uptime: 9m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #27808 - Brand: Transcend SSD200 Series