Benchmark #27828 - pibenchmarks.com

Brand: Pioneer APS-XS03 Portable SSD
SSD (Portable)
#466 / 1,672
19
#502 / 1,672
#485 / 983
#74 / 144
6,980
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-23 12:27:22
#27,828
8,455
+1,475 (+17.45%)
Anonymous
Pioneer 240GB SSD

Storage Details
Pioneer APS-XS03 Portable SSD
SSD (Portable)
240G
SSD
Pioneer
APS-XS03-240
less than 1.8 inch
SATA
3.00
5,000
1d6b:2550
0x1d6b (Linux Foundation)
0x2550 (AES2550 Fingerprint Sensor)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
201 MB/s
87.78 MB/s
122.67 MB/s
11,590 IOPS
17,655 IOPS
46,361 KB/s
70,620 KB/s
30,977 KB/s
28,481 KB/s
18,713 KB/s
31,887 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=117210a6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 337.2 MiB (8.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 200x50 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-3: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 223.57 GiB used: 3.29 GiB (1.5%) ID-1: /dev/sda type: USB model: SATA SSD size: 223.57 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.32 GiB size: 219.81 GiB (98.43%) used: 3.24 GiB (1.5%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.0 MiB (20.6%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 70A2-8001 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Kingston type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 13fe:2550 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 148 1: cpu: 0.7% command: [kworker/u8:1-events_unbound] pid: 21296 mem: 0.00 MiB (0.0%) 2: cpu: 0.6% command: [kworker/0:2-mm_percpu_wq] pid: 20858 mem: 0.00 MiB (0.0%) 3: cpu: 0.4% command: [kworker/0:1+events_freezable] pid: 20543 mem: 0.00 MiB (0.0%) 4: cpu: 0.3% command: sshd: pid: 21265 mem: 6.18 MiB (0.1%) 5: cpu: 0.2% command: systemd pid: 21273 mem: 7.22 MiB (0.1%) Memory top: 5 of 148 1: mem: 72.3 MiB (1.8%) command: dockerd pid: 431 cpu: 0.0% 2: mem: 33.0 MiB (0.8%) command: containerd pid: 426 cpu: 0.0% 3: mem: 31.8 MiB (0.8%) command: systemd-journald pid: 121 cpu: 0.0% 4: mem: 16.2 MiB (0.4%) command: php-cgi pid: 18384 cpu: 0.0% 5: mem: 12.8 MiB (0.3%) command: packagekitd pid: 21520 cpu: 0.2% Info: Processes: 148 Uptime: 2d 23h 12m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=117210a6-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 337.2 MiB (8.5%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 
           Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 200x50 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 223.57 GiB used: 3.29 GiB (1.5%) 
           ID-1: /dev/sda type: USB model: SATA SSD size: 223.57 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.32 GiB size: 219.81 GiB (98.43%) used: 3.24 GiB (1.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.0 MiB (20.6%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 70A2-8001 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: Kingston type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 13fe:2550 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 148 
           1: cpu: 0.7% command: [kworker/u8:1-events_unbound] pid: 21296 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.6% command: [kworker/0:2-mm_percpu_wq] pid: 20858 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.4% command: [kworker/0:1+events_freezable] pid: 20543 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.3% command: sshd: pid: 21265 mem: 6.18 MiB (0.1%) 
           5: cpu: 0.2% command: systemd pid: 21273 mem: 7.22 MiB (0.1%) 
           Memory top: 5 of 148 
           1: mem: 72.3 MiB (1.8%) command: dockerd pid: 431 cpu: 0.0% 
           2: mem: 33.0 MiB (0.8%) command: containerd pid: 426 cpu: 0.0% 
           3: mem: 31.8 MiB (0.8%) command: systemd-journald pid: 121 cpu: 0.0% 
           4: mem: 16.2 MiB (0.4%) command: php-cgi pid: 18384 cpu: 0.0% 
           5: mem: 12.8 MiB (0.3%) command: packagekitd pid: 21520 cpu: 0.2% 
Info:      Processes: 148 Uptime: 2d 23h 12m Init: systemd v: 241 runlevel: 5 
           target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.1.03

Benchmark #27828 - Brand: Pioneer APS-XS03 Portable SSD