Benchmark #27847 - pibenchmarks.com

Brand: AData UV150
USB Flash
#470 / 1,665
18
#1,239 / 1,665
#22 / 93
#24 / 89
1,298
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-23 16:42:55
#27,847
595
-703 (-118.15%)
Anonymous
1

Storage Details
AData UV150
USB Flash
819G
USB Flash
AData
USBFlashDrive
0x6961
2.10
480
2109:c96a
0x2109
0xc96a
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
16.1 MB/s
27.91 MB/s
26.86 MB/s
74 IOPS
1,251 IOPS
296 KB/s
5,006 KB/s
5,461 KB/s
8,753 KB/s
5,030 KB/s
306 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=223f1c77-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 278.3 MiB (7.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 7.23 GiB used: 1.95 GiB (27.0%) ID-1: /dev/sda type: USB vendor: A-Data model: USB Flash Drive size: 7.23 GiB block size: physical: 512 B logical: 512 B rev: 1100 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 6.97 GiB size: 6.83 GiB (98.00%) used: 1.90 GiB (27.8%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 706944a6-7d0f-4a45-9f8c-7fb07375e9f7 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.0 MiB (20.6%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 592B-C92C Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.1:3 info: A-DATA C906 Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 125f:c96a Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 127 1: cpu: 0.4% command: [kworker/0:1-events] pid: 2709 mem: 0.00 MiB (0.0%) 2: cpu: 0.3% command: [kworker/0:3-mm_percpu_wq] pid: 2066 mem: 0.00 MiB (0.0%) 3: cpu: 0.1% command: sshd: pid: 6782 mem: 6.18 MiB (0.1%) 4: cpu: 0.1% command: [kworker/0:2-events] pid: 6975 mem: 0.00 MiB (0.0%) 5: cpu: 0.0% command: init pid: 1 mem: 8.02 MiB (0.2%) Memory top: 5 of 127 1: mem: 48.0 MiB (1.2%) command: jupyter-notebook started by: python3 pid: 515 cpu: 0.0% 2: mem: 44.5 MiB (1.1%) command: python3 pid: 1471 cpu: 0.0% 3: mem: 8.33 MiB (0.2%) command: systemd-journald pid: 117 cpu: 0.0% 4: mem: 8.02 MiB (0.2%) command: init pid: 1 cpu: 0.0% 5: mem: 6.73 MiB (0.1%) command: systemd pid: 6788 cpu: 0.0% Info: Processes: 127 Uptime: 1d 10h 36m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=223f1c77-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 278.3 MiB (7.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 7.23 GiB used: 1.95 GiB (27.0%) 
           ID-1: /dev/sda type: USB vendor: A-Data model: USB Flash Drive size: 7.23 GiB 
           block size: physical: 512 B logical: 512 B rev: 1100 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 6.97 GiB size: 6.83 GiB (98.00%) used: 1.90 GiB (27.8%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 706944a6-7d0f-4a45-9f8c-7fb07375e9f7 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.0 MiB (20.6%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 592B-C92C 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.1:3 info: A-DATA C906 Flash Drive type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 125f:c96a Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 127 
           1: cpu: 0.4% command: [kworker/0:1-events] pid: 2709 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.3% command: [kworker/0:3-mm_percpu_wq] pid: 2066 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.1% command: sshd: pid: 6782 mem: 6.18 MiB (0.1%) 
           4: cpu: 0.1% command: [kworker/0:2-events] pid: 6975 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.0% command: init pid: 1 mem: 8.02 MiB (0.2%) 
           Memory top: 5 of 127 
           1: mem: 48.0 MiB (1.2%) command: jupyter-notebook started by: python3 pid: 515 
           cpu: 0.0% 
           2: mem: 44.5 MiB (1.1%) command: python3 pid: 1471 cpu: 0.0% 
           3: mem: 8.33 MiB (0.2%) command: systemd-journald pid: 117 cpu: 0.0% 
           4: mem: 8.02 MiB (0.2%) command: init pid: 1 cpu: 0.0% 
           5: mem: 6.73 MiB (0.1%) command: systemd pid: 6788 cpu: 0.0% 
Info:      Processes: 127 Uptime: 1d 10h 36m Init: systemd v: 241 runlevel: 5 Compilers: 
           gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #27847 - Brand: AData UV150