Benchmark #27891 - pibenchmarks.com

Brand: Lexar SD OEM (USD00)
C10 U1
#125 / 1,672
124
#1,433 / 1,672
#270 / 389
919
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-24 03:33:27
#27,891
1,343
+424 (+31.57%)
Anonymous

Secure Digital (SD) Card Details
Lexar SD OEM (USD00)
C10 U1
14.6G
SD
Lexar
USD00
SDHC
3.00
0x9c
SO
1.0
12/2018
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
21 MB/s
21.98 MB/s
22.08 MB/s
1,255 IOPS
2,505 IOPS
5,020 KB/s
10,022 KB/s
8,660 KB/s
5,126 KB/s
7,474 KB/s
4,661 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:3840x2160M@30 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=f7d95405-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 498.5 MiB (12.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 3840x2160 s-dpi: 96 s-size: 1016x571mm (40.0x22.5") s-diag: 1165mm (45.9") Monitor-1: HDMI-1 res: 3840x2160 hz: 30 dpi: 140 size: 698x393mm (27.5x15.5") diag: 801mm (31.5") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 14.82 GiB used: 3.11 GiB (21.0%) ID-1: /dev/mmcblk0 model: USD00 size: 14.82 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.57 GiB size: 14.28 GiB (98.02%) used: 3.07 GiB (21.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 70A2-8001 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.4:3 info: Apple Hub in Aluminum Keyboard ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 05ac:1006 Device-1: 1-1.4.1:4 info: Logitech Nano Receiver type: Mouse,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c526 Device-2: 1-1.4.2:5 info: Apple Aluminum Keyboard (ISO) type: Keyboard,HID driver: apple,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 05ac:0221 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 164 1: cpu: 13.3% command: chromium-browser-v7 pid: 930 mem: 126.3 MiB (3.2%) 2: cpu: 11.2% command: chromium-browser-v7 pid: 1282 mem: 95.2 MiB (2.4%) 3: cpu: 10.9% command: chromium-browser-v7 pid: 1327 mem: 82.7 MiB (2.1%) 4: cpu: 9.4% command: chromium-browser-v7 pid: 975 mem: 75.3 MiB (1.9%) 5: cpu: 5.6% command: xorg pid: 535 mem: 46.0 MiB (1.1%) Memory top: 5 of 164 1: mem: 126.3 MiB (3.2%) command: chromium-browser-v7 pid: 930 cpu: 13.3% 2: mem: 95.2 MiB (2.4%) command: chromium-browser-v7 pid: 1282 cpu: 11.2% 3: mem: 82.7 MiB (2.1%) command: chromium-browser-v7 pid: 1327 cpu: 10.9% 4: mem: 75.3 MiB (1.9%) command: chromium-browser-v7 pid: 975 cpu: 9.4% 5: mem: 47.8 MiB (1.2%) command: chromium-browser-v7 pid: 979 cpu: 1.0% Info: Processes: 164 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           video=HDMI-A-1:3840x2160M@30 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=f7d95405-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 498.5 MiB (12.5%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 3840x2160 s-dpi: 96 s-size: 1016x571mm (40.0x22.5") 
           s-diag: 1165mm (45.9") 
           Monitor-1: HDMI-1 res: 3840x2160 hz: 30 dpi: 140 size: 698x393mm (27.5x15.5") 
           diag: 801mm (31.5") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 14.82 GiB used: 3.11 GiB (21.0%) 
           ID-1: /dev/mmcblk0 model: USD00 size: 14.82 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.57 GiB size: 14.28 GiB (98.02%) used: 3.07 GiB (21.5%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 70A2-8001 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.4:3 info: Apple Hub in Aluminum Keyboard ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05ac:1006 
           Device-1: 1-1.4.1:4 info: Logitech Nano Receiver type: Mouse,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c526 
           Device-2: 1-1.4.2:5 info: Apple Aluminum Keyboard (ISO) type: Keyboard,HID 
           driver: apple,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 05ac:0221 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 164 
           1: cpu: 13.3% command: chromium-browser-v7 pid: 930 mem: 126.3 MiB (3.2%) 
           2: cpu: 11.2% command: chromium-browser-v7 pid: 1282 mem: 95.2 MiB (2.4%) 
           3: cpu: 10.9% command: chromium-browser-v7 pid: 1327 mem: 82.7 MiB (2.1%) 
           4: cpu: 9.4% command: chromium-browser-v7 pid: 975 mem: 75.3 MiB (1.9%) 
           5: cpu: 5.6% command: xorg pid: 535 mem: 46.0 MiB (1.1%) 
           Memory top: 5 of 164 
           1: mem: 126.3 MiB (3.2%) command: chromium-browser-v7 pid: 930 cpu: 13.3% 
           2: mem: 95.2 MiB (2.4%) command: chromium-browser-v7 pid: 1282 cpu: 11.2% 
           3: mem: 82.7 MiB (2.1%) command: chromium-browser-v7 pid: 1327 cpu: 10.9% 
           4: mem: 75.3 MiB (1.9%) command: chromium-browser-v7 pid: 975 cpu: 9.4% 
           5: mem: 47.8 MiB (1.2%) command: chromium-browser-v7 pid: 979 cpu: 1.0% 
Info:      Processes: 164 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #27891 - Brand: Lexar SD OEM (USD00)