Benchmark #27895 - pibenchmarks.com

Brand: Emtec X150
SSD (2.5" SATA)
#422 / 1,679
26
#481 / 1,679
#464 / 984
#70 / 370
7,142
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-24 05:16:09
#27,895
8,568
+1,426 (+16.64%)
Anonymous

Storage Details
Emtec X150
SSD (2.5" SATA)
120G
SSD
Emtec
X150120GB
SATA
3.00
5,000
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
2,000 (+500)
500
1,600

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
189 MB/s
195.19 MB/s
135.67 MB/s
15,433 IOPS
23,813 IOPS
61,733 KB/s
95,255 KB/s
33,474 KB/s
25,507 KB/s
19,107 KB/s
27,828 KB/s

inxi Results
System: Kernel: 5.4.42-v8+ aarch64 bits: 64 compiler: gcc v: 5.4.0 parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:0578:u console=ttyAMA0,115200 console=tty1 root=PARTUUID=009edfa1-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.88 GiB used: 302.4 MiB (15.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 2000 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 4: 2000 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 132x64 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.42-v8+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IP v6: scope: link WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 1.02 TiB used: 414.08 GiB (39.7%) ID-1: /dev/sda type: USB vendor: Emtec model: X150 120GB size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: V4.7 temp: 48 C scheme: MBR SMART: yes state: enabled health: PASSED on: 117d 14h cycles: 224 read: 67 KiB written: 441 KiB ID-2: /dev/sdb type: USB vendor: Western Digital model: WD10 EZRX-00A8LB0 drive model: WD10EZRX-00A8LB0 family: Green size: 931.51 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 8101 drive rev: 01.01A01 temp: 31 C scheme: GPT SMART: yes state: enabled health: PASSED on: 2y 12d 16h cycles: 3739 Old-Age: UDMA CRC errors: 6986 alert: Bad cable/connection? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.75 GiB (98.40%) used: 4.55 GiB (4.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: eae7cc40-f1d2-4bf1-8b9b-ccab61498abe ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 54.0 MiB (21.4%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: F8C9-55AB ID-3: /media/pi/1To_USB raw size: 931.51 GiB size: 915.89 GiB (98.32%) used: 409.48 GiB (44.7%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A uuid: f8888c2a-a21f-4800-8183-bf307647d927 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Device-2: 2-2:3 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian buster main contrib non-free 2: deb http: //deb.debian.org/debian-security/ buster/updates main contrib non-free 3: deb http: //deb.debian.org/debian buster-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https: //repos.influxdata.com/debian stretch stable No active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/speedtest.list 1: deb https: //ookla.bintray.com/debian buster main Processes: CPU top: 5 of 136 1: cpu: 1.6% command: plex pid: 659 mem: 50.2 MiB (2.7%) 2: cpu: 0.7% command: init pid: 1 mem: 9.16 MiB (0.4%) 3: cpu: 0.7% command: telegraf pid: 522 mem: 50.4 MiB (2.7%) 4: cpu: 0.6% command: [kworker/0:3+events_freezable] pid: 88 mem: 0.00 MiB (0.0%) 5: cpu: 0.6% command: packagekitd pid: 1798 mem: 14.6 MiB (0.7%) Memory top: 5 of 136 1: mem: 60.4 MiB (3.2%) command: plex pid: 534 cpu: 0.4% 2: mem: 50.4 MiB (2.7%) command: telegraf pid: 522 cpu: 0.7% 3: mem: 50.2 MiB (2.7%) command: plex pid: 659 cpu: 1.6% 4: mem: 19.4 MiB (1.0%) command: php-cgi pid: 533 cpu: 0.0% 5: mem: 14.6 MiB (0.7%) command: packagekitd pid: 1798 cpu: 0.6% Info: Processes: 136 Uptime: 6m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 5.4.42-v8+ aarch64 bits: 64 compiler: gcc v: 5.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:0578:u console=ttyAMA0,115200 
           console=tty1 root=PARTUUID=009edfa1-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait 
           Console: tty 0 Distro: Debian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.88 GiB used: 302.4 MiB (15.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 2000 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 
           4: 2000 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 132x64 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k5.4.42-v8+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IP v6:  scope: link 
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: 1.02 TiB used: 414.08 GiB (39.7%) 
           ID-1: /dev/sda type: USB vendor: Emtec model: X150 120GB size: 111.79 GiB block size: 
           physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: V4.7 
           temp: 48 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 117d 14h cycles: 224 read: 67 KiB 
           written: 441 KiB 
           ID-2: /dev/sdb type: USB vendor: Western Digital model: WD10 EZRX-00A8LB0 
           drive model: WD10EZRX-00A8LB0 family: Green size: 931.51 GiB block size: 
           physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 8101 drive rev: 01.01A01 temp: 31 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 2y 12d 16h cycles: 3739 Old-Age: 
           UDMA CRC errors: 6986 alert: Bad cable/connection? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.75 GiB (98.40%) used: 4.55 GiB (4.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: eae7cc40-f1d2-4bf1-8b9b-ccab61498abe 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 54.0 MiB (21.4%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: F8C9-55AB 
           ID-3: /media/pi/1To_USB raw size: 931.51 GiB size: 915.89 GiB (98.32%) 
           used: 409.48 GiB (44.7%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: N/A 
           uuid: f8888c2a-a21f-4800-8183-bf307647d927 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 
           Device-2: 2-2:3 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian buster main contrib non-free
           2: deb http: //deb.debian.org/debian-security/ buster/updates main contrib non-free
           3: deb http: //deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list 
           1: deb https: //repos.influxdata.com/debian stretch stable
           No active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/speedtest.list 
           1: deb https: //ookla.bintray.com/debian buster main
Processes: CPU top: 5 of 136 
           1: cpu: 1.6% command: plex pid: 659 mem: 50.2 MiB (2.7%) 
           2: cpu: 0.7% command: init pid: 1 mem: 9.16 MiB (0.4%) 
           3: cpu: 0.7% command: telegraf pid: 522 mem: 50.4 MiB (2.7%) 
           4: cpu: 0.6% command: [kworker/0:3+events_freezable] pid: 88 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.6% command: packagekitd pid: 1798 mem: 14.6 MiB (0.7%) 
           Memory top: 5 of 136 
           1: mem: 60.4 MiB (3.2%) command: plex pid: 534 cpu: 0.4% 
           2: mem: 50.4 MiB (2.7%) command: telegraf pid: 522 cpu: 0.7% 
           3: mem: 50.2 MiB (2.7%) command: plex pid: 659 cpu: 1.6% 
           4: mem: 19.4 MiB (1.0%) command: php-cgi pid: 533 cpu: 0.0% 
           5: mem: 14.6 MiB (0.7%) command: packagekitd pid: 1798 cpu: 0.6% 
Info:      Processes: 136 Uptime: 6m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #27895 - Brand: Emtec X150