Benchmark #27953 - pibenchmarks.com

Brand: AData SU630
SSD (2.5" SATA)
#59 / 1,539
175
#673 / 1,539
#647 / 875
#225 / 363
5,323
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-24 19:41:53
#27,953
7,288
+1,965 (+26.96%)
tito51
Raspian X - SD600Q

Storage Details
AData SU630
SSD (2.5" SATA)
240G
SSD
AData
SU630
2.5 inch
SATA
3.00
5,000
1d6b:a88a
0x1d6b (Linux Foundation)
0xa88a
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
2,000 (+500)
500
8 GB
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
190 MB/s
206.2 MB/s
195.52 MB/s
7,270 IOPS
5,603 IOPS
29,080 KB/s
22,413 KB/s
31,181 KB/s
27,073 KB/s
19,307 KB/s
30,367 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:720x480M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=125f:a88a:u console=ttyS0,115200 console=tty1 root=PARTUUID=ea7d04d6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Xfce 4.12.4 tk: Gtk 2.24.32 info: plank, vala-panel, xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 Memory: RAM: total: 7.86 GiB used: 930.3 MiB (11.6%) gpu: 512.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 640 Speed: 2000 MHz max: 2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 4: 2000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.7x15.0") s-diag: 777mm (30.6") Monitor-1: HDMI-1 res: 2560x1440 hz: 60 dpi: 109 size: 597x336mm (23.5x13.2") diag: 685mm (27") OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 10.0.X.X/24 type: dynamic noprefixroute scope: global broadcast: 10.0.X.X IP v6: fdfd:dfed:d77c::cce/128 type: dynamic noprefixroute scope: global IP v6: fdfd:dfed:d77c:0:41cf:c29b:735c:546/64 type: noprefixroute scope: global IP v6: fe80::4ebf:b576:8019:2da1/64 type: noprefixroute scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 98.194.X.X Drives: Local Storage: total: 223.57 GiB used: 7.62 GiB (3.4%) ID-1: /dev/sda type: USB vendor: A-Data model: SD600Q size: 223.57 GiB block size: physical: 512 B logical: 512 B rev: 9301 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.32 GiB size: 219.85 GiB (98.45%) used: 7.57 GiB (3.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.1 MiB (20.3%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Maxxter type: Mouse,Keyboard driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 248a:8367 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: A-DATA type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 125f:a88a Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 201 1: cpu: 11.4% command: xorg pid: 556 mem: 52.4 MiB (0.6%) 2: cpu: 4.0% command: xfdesktop pid: 1009 mem: 40.5 MiB (0.5%) 3: cpu: 3.5% command: xfce4-terminal pid: 1597 mem: 39.4 MiB (0.5%) 4: cpu: 3.4% command: plank pid: 1030 mem: 36.7 MiB (0.4%) 5: cpu: 2.9% command: blueman-applet started by: python3 pid: 1107 mem: 49.8 MiB (0.6%) Memory top: 5 of 201 1: mem: 52.4 MiB (0.6%) command: xorg pid: 556 cpu: 11.4% 2: mem: 49.8 MiB (0.6%) command: blueman-applet started by: python3 pid: 1107 cpu: 2.9% 3: mem: 42.1 MiB (0.5%) command: evolution-alarm-notify pid: 1066 cpu: 2.1% 4: mem: 40.5 MiB (0.5%) command: xfdesktop pid: 1009 cpu: 4.0% 5: mem: 39.4 MiB (0.5%) command: xfce4-terminal pid: 1597 cpu: 3.5% Info: Processes: 201 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.1.03

inxi Results

System:
  Host: raspberrypi Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc 
  v: 4.9.3 
  parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M 
  snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
  snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:720x480M@60 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
  vc_mem.mem_size=0x3ff00000 usb-storage.quirks=125f:a88a:u 
  console=ttyS0,115200 console=tty1 root=PARTUUID=ea7d04d6-02 
  rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
  plymouth.ignore-serial-consoles 
  Desktop: Xfce 4.12.4 tk: Gtk 2.24.32 info: plank, vala-panel, xfce4-panel 
  wm: xfwm4 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 
  rev: d03114 
Memory:
  RAM: total: 7.86 GiB used: 930.3 MiB (11.6%) gpu: 512.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A 
  bogomips: 640 
  Speed: 2000 MHz max: 2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 
  4: 2000 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting 
  unloaded: fbdev display ID: :0.0 screens: 1 
  Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.7x15.0") 
  s-diag: 777mm (30.6") 
  Monitor-1: HDMI-1 res: 2560x1440 hz: 60 dpi: 109 
  size: 597x336mm (23.5x13.2") diag: 685mm (27") 
  OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.19.118-v7l+ 
Network:
  Message: No ARM data found for this feature. 
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IP v4: 10.0.X.X/24 type: dynamic noprefixroute scope: global 
  broadcast: 10.0.X.X 
  IP v6: fdfd:dfed:d77c::cce/128 type: dynamic noprefixroute scope: global 
  IP v6: fdfd:dfed:d77c:0:41cf:c29b:735c:546/64 type: noprefixroute 
  scope: global 
  IP v6: fe80::4ebf:b576:8019:2da1/64 type: noprefixroute scope: link 
  IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
  WAN IP: 98.194.X.X 
Drives:
  Local Storage: total: 223.57 GiB used: 7.62 GiB (3.4%) 
  ID-1: /dev/sda type: USB vendor: A-Data model: SD600Q size: 223.57 GiB 
  block size: physical: 512 B logical: 512 B rev: 9301 
  scheme: MBR 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 223.32 GiB size: 219.85 GiB (98.45%) 
  used: 7.57 GiB (3.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 
  label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
  ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
  used: 51.1 MiB (20.3%) fs: vfat block size: 512 B dev: /dev/sda1 
  label: boot uuid: 6341-C9E5 
Swap:
  Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
  ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 
  file: /var/swap 
Unmounted:
  Message: No unmounted partitions found. 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
  chip ID: 2109:3431 
  Device-1: 1-1.3:3 info: Maxxter type: Mouse,Keyboard 
  driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s 
  chip ID: 248a:8367 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 
  Device-1: 2-2:2 info: A-DATA type: Mass Storage driver: usb-storage 
  interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 125f:a88a Sensors:
  Message: No sensors data was found. Is sensors configured? 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ buster main
Processes:
  CPU top: 5 of 201 
  1: cpu: 11.4% command: xorg pid: 556 mem: 52.4 MiB (0.6%) 
  2: cpu: 4.0% command: xfdesktop pid: 1009 mem: 40.5 MiB (0.5%) 
  3: cpu: 3.5% command: xfce4-terminal pid: 1597 mem: 39.4 MiB (0.5%) 
  4: cpu: 3.4% command: plank pid: 1030 mem: 36.7 MiB (0.4%) 
  5: cpu: 2.9% command: blueman-applet started by: python3 pid: 1107 
  mem: 49.8 MiB (0.6%) 
  Memory top: 5 of 201 
  1: mem: 52.4 MiB (0.6%) command: xorg pid: 556 cpu: 11.4% 
  2: mem: 49.8 MiB (0.6%) command: blueman-applet started by: python3 
  pid: 1107 cpu: 2.9% 
  3: mem: 42.1 MiB (0.5%) command: evolution-alarm-notify pid: 1066 
  cpu: 2.1% 
  4: mem: 40.5 MiB (0.5%) command: xfdesktop pid: 1009 cpu: 4.0% 
  5: mem: 39.4 MiB (0.5%) command: xfce4-terminal pid: 1597 cpu: 3.5% 
Info:
  Processes: 201 Uptime: 1m Init: systemd v: 241 runlevel: 5 
  target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
  Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.1.03

Benchmark #27953 - Brand: AData SU630