Benchmark #27966 - pibenchmarks.com

Brand: SanDisk Extreme Pro USB
SSD (Portable)
#59 / 1,679
311
#996 / 1,679
#913 / 984
#129 / 144
3,241
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-25 02:50:35
#27,966
1,755
-1,486 (-84.67%)
Anonymous

Storage Details
SanDisk Extreme Pro USB
SSD (Portable)
128G
SSD
SanDisk
pSSD
1.8 inch
SATA
3.00
5,000
0781:5588
0x0781 (SanDisk Corp.)
0x5588
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
26.5 MB/s
196.51 MB/s
185.96 MB/s
1,255 IOPS
2,807 IOPS
5,020 KB/s
11,229 KB/s
24,787 KB/s
6,990 KB/s
11,730 KB/s
4,646 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=ddde39e0-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 841.1 MiB (21.1%) gpu: 256.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 507x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-3: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: stable-privacy scope: link IF-ID-4: veth5cdbdb8 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: vethbfcbcfb state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 9.21 TiB used: 2.79 TiB (30.3%) ID-1: /dev/sda type: USB vendor: Seagate model: BUP Slim SL size: 1.82 TiB block size: physical: 512 B logical: 512 B rev: 0143 SMART Message: A mandatory SMART command failed. Various possible causes. ID-2: /dev/sdb type: USB vendor: SanDisk model: Extreme Pro drive model: pSSD family: based SSDs size: 119.25 GiB block size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 6EB 1030 temp: 8 C scheme: MBR SMART: yes state: enabled health: FAILED! on: 17 hrs read: 0 KiB written: 0 KiB Pre-Fail: attribute: Perc_Avail_Resrvd_Space threshold: 5 alert: FAILING_NOW ID-3: /dev/sdc type: USB vendor: Seagate model: Expansion size: 3.64 TiB block size: physical: 4096 B logical: 512 B rev: 0710 SMART Message: A mandatory SMART command failed. Various possible causes. ID-4: /dev/sdd type: USB vendor: Seagate model: BUP Portable size: 3.64 TiB block size: physical: 4096 B logical: 512 B rev: 1707 SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 119.00 GiB size: 116.63 GiB (98.01%) used: 18.60 GiB (15.9%) fs: ext4 block size: 4096 B dev: /dev/sdb2 label: rootfs uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e ID-2: /backups2 raw size: 1.82 TiB size: 4.55 TiB (250.00%) used: 2.75 TiB (60.5%) fs: btrfs block size: 4096 B dev: /dev/sda label: N/A uuid: a08be52d-16a4-41e6-92e1-2467a4a2be07 ID-3: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sdb1 label: boot uuid: A764-6923 ID-4: /btrfsraid1 raw size: 1.82 TiB size: 4.55 TiB (250.00%) used: 2.75 TiB (60.5%) fs: btrfs block size: 4096 B dev: /dev/sda label: N/A uuid: a08be52d-16a4-41e6-92e1-2467a4a2be07 ID-5: /var/lib/docker/overlay2/788c34f6a7d744ba0c010f4805220e444faae82381b363de1c34fb2f88905af8/merged raw size: N/A size: 116.63 GiB used: 18.60 GiB (15.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/8aa3940963324c868407a2c02d1bf0a3cc4db9e6cc11df0dbcac780cca8bc938/merged raw size: N/A size: 116.63 GiB used: 18.60 GiB (15.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/f2259e97a5c3a115536cdb47b303837d2e83a1b86ec0f1fc5d2c9448d5a67d9f/merged raw size: N/A size: 116.63 GiB used: 18.60 GiB (15.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 2.00 GiB used: 75.0 MiB (3.7%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.2:3 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 0bda:5411 Hub: 1-1.2.4:4 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 0bda:5411 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5588 Hub: 2-2:3 info: Realtek ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 0bda:0411 Device-1: 2-2.1:4 info: Seagate RSS LLC Backup Plus Slim type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab21 Device-2: 2-2.2:5 info: Seagate RSS LLC Expansion Portable type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:231a Device-3: 2-2.3:6 info: Seagate RSS LLC type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 0bc2:ac36 Hub: 2-2.4:7 info: Realtek ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 0bda:0411 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 247 1: cpu: 38.1% command: urbackupsrv pid: 20572 mem: 167.4 MiB (4.4%) 2: cpu: 3.2% command: anydesk pid: 2074 mem: 68.5 MiB (1.8%) 3: cpu: 1.3% command: xorg pid: 660 mem: 66.6 MiB (1.7%) 4: cpu: 0.9% command: gnome-system-monitor pid: 19185 mem: 25.1 MiB (0.6%) 5: cpu: 0.7% command: urbackupclientbackend pid: 582 mem: 5.27 MiB (0.1%) Memory top: 5 of 247 1: mem: 167.4 MiB (4.4%) command: urbackupsrv pid: 20572 cpu: 38.1% 2: mem: 79.3 MiB (2.1%) command: / started by: k4dirstat pid: 20113 cpu: 0.7% 3: mem: 68.5 MiB (1.8%) command: anydesk pid: 2074 cpu: 3.2% 4: mem: 66.6 MiB (1.7%) command: xorg pid: 660 cpu: 1.3% 5: mem: 25.1 MiB (0.6%) command: gnome-system-monitor pid: 19185 cpu: 0.9% Info: Processes: 247 Uptime: 17h 44m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=ddde39e0-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 841.1 MiB (21.1%) gpu: 256.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 
           Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 507x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-3: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           IP v6:  virtual: stable-privacy scope: link 
           IF-ID-4: veth5cdbdb8 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: vethbfcbcfb state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: 9.21 TiB used: 2.79 TiB (30.3%) 
           ID-1: /dev/sda type: USB vendor: Seagate model: BUP Slim SL size: 1.82 TiB block size: 
           physical: 512 B logical: 512 B rev: 0143 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           ID-2: /dev/sdb type: USB vendor: SanDisk model: Extreme Pro drive model: pSSD 
           family: based SSDs size: 119.25 GiB block size: physical: 512 B logical: 512 B 
           sata: 3.0 speed: 6.0 Gb/s rev: 6EB 1030 
           temp: 8 C scheme: MBR 
           SMART: yes state: enabled health: FAILED! on: 17 hrs read: 0 KiB written: 0 KiB 
           Pre-Fail: attribute: Perc_Avail_Resrvd_Space threshold: 5 alert: FAILING_NOW 
           ID-3: /dev/sdc type: USB vendor: Seagate model: Expansion size: 3.64 TiB block size: 
           physical: 4096 B logical: 512 B rev: 0710 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           ID-4: /dev/sdd type: USB vendor: Seagate model: BUP Portable size: 3.64 TiB block size: 
           physical: 4096 B logical: 512 B rev: 1707 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 119.00 GiB size: 116.63 GiB (98.01%) used: 18.60 GiB (15.9%) fs: ext4 
           block size: 4096 B dev: /dev/sdb2 label: rootfs 
           uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e 
           ID-2: /backups2 raw size: 1.82 TiB size: 4.55 TiB (250.00%) used: 2.75 TiB (60.5%) 
           fs: btrfs block size: 4096 B dev: /dev/sda label: N/A 
           uuid: a08be52d-16a4-41e6-92e1-2467a4a2be07 
           ID-3: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/sdb1 label: boot uuid: A764-6923 
           ID-4: /btrfsraid1 raw size: 1.82 TiB size: 4.55 TiB (250.00%) used: 2.75 TiB (60.5%) 
           fs: btrfs block size: 4096 B dev: /dev/sda label: N/A 
           uuid: a08be52d-16a4-41e6-92e1-2467a4a2be07 
           ID-5: /var/lib/docker/overlay2/788c34f6a7d744ba0c010f4805220e444faae82381b363de1c34fb2f88905af8/merged raw size: N/A size: 116.63 GiB used: 18.60 GiB (15.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/8aa3940963324c868407a2c02d1bf0a3cc4db9e6cc11df0dbcac780cca8bc938/merged raw size: N/A size: 116.63 GiB used: 18.60 GiB (15.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/f2259e97a5c3a115536cdb47b303837d2e83a1b86ec0f1fc5d2c9448d5a67d9f/merged raw size: N/A size: 116.63 GiB used: 18.60 GiB (15.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 2.00 GiB used: 75.0 MiB (3.7%) priority: -2 
           file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.2:3 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 0bda:5411 
           Hub: 1-1.2.4:4 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 0bda:5411 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 0781:5588 Hub: 2-2:3 info: Realtek ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 0bda:0411 
           Device-1: 2-2.1:4 info: Seagate RSS LLC Backup Plus Slim type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab21 Device-2: 2-2.2:5 info: Seagate RSS LLC Expansion Portable type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:231a Device-3: 2-2.3:6 info: Seagate RSS LLC type: Mass Storage driver: uas interfaces: 1 
           rev: 3.2 speed: 5 Gb/s chip ID: 0bc2:ac36 Hub: 2-2.4:7 info: Realtek ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 0bda:0411 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 247 
           1: cpu: 38.1% command: urbackupsrv pid: 20572 mem: 167.4 MiB (4.4%) 
           2: cpu: 3.2% command: anydesk pid: 2074 mem: 68.5 MiB (1.8%) 
           3: cpu: 1.3% command: xorg pid: 660 mem: 66.6 MiB (1.7%) 
           4: cpu: 0.9% command: gnome-system-monitor pid: 19185 mem: 25.1 MiB (0.6%) 
           5: cpu: 0.7% command: urbackupclientbackend pid: 582 mem: 5.27 MiB (0.1%) 
           Memory top: 5 of 247 
           1: mem: 167.4 MiB (4.4%) command: urbackupsrv pid: 20572 cpu: 38.1% 
           2: mem: 79.3 MiB (2.1%) command: / started by: k4dirstat pid: 20113 cpu: 0.7% 
           3: mem: 68.5 MiB (1.8%) command: anydesk pid: 2074 cpu: 3.2% 
           4: mem: 66.6 MiB (1.7%) command: xorg pid: 660 cpu: 1.3% 
           5: mem: 25.1 MiB (0.6%) command: gnome-system-monitor pid: 19185 cpu: 0.9% 
Info:      Processes: 247 Uptime: 17h 44m Init: systemd v: 241 runlevel: 5 
           target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.1.03

Benchmark #27966 - Brand: SanDisk Extreme Pro USB