Benchmark #27994 - pibenchmarks.com

Brand: Lexar Micro SD Card USB Reader
USB Flash
#634 / 1,665
10
#1,320 / 1,665
#28 / 93
#31 / 89
1,146
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.de Amazon.es Amazon.fr Amazon.sg

Overview
2020-06-25 11:10:53
#27,994
1,331
+185 (+13.90%)
paulwratt
Sandisk Ultra 128Gb Ext2 in Lexar sdcard reader on Orico 2.5 SSD USB3 hub on RPi4

Storage Details
Lexar Micro SD Card USB Reader
USB Flash
107.2G
USB Flash
Lexar
microSDRDR
3.00
5,000
2109:b051
0x2109
0xb051 (microSD RDR UHS-I Card Reader [LRWM03U-7000])
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
2,147 (+647)
700 (+200)
4 GB
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
37.4 MB/s
75.65 MB/s
75.62 MB/s
811 IOPS
2,130 IOPS
3,244 KB/s
8,523 KB/s
8,119 KB/s
4,250 KB/s
8,097 KB/s
3,387 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:640x480M@60,margin_left=46,margin_right=44,margin_top=24,margin_bottom=32 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ea7d04d6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Xfce 4.12.4 tk: Gtk 2.24.32 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 976.3 MiB (24.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 472 Speed: 656 MHz min/max: 656/2295 MHz Core speeds (MHz): 1: 656 2: 656 3: 656 4: 656 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") s-diag: 583mm (23") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 30 size: 1600x900mm (63.0x35.4") diag: 1836mm (72.3") OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fd20:da22:56a8:e500:9587:9199:fc13:71d4/64 type: dynamic noprefixroute scope: global IP v6: fe80::d5a7:3a72:79d:2a98/64 type: noprefixroute scope: link WAN IP: 122.56.X.X Drives: Local Storage: total: 1.08 TiB used: 91.56 GiB (8.3%) ID-1: /dev/mmcblk0 model: SA32G size: 28.83 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Western Digital model: WD Elements 25A2 drive model: WD10JMVW-11AJGS4 family: Elements / My Passport (USB, AF) size: 931.48 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 3.0 Gb/s rotation: 5400 rpm drive WD-WXL1A2741RT8 rev: 1014 drive rev: 01.01A01 temp: 31 C scheme: GPT SMART: yes state: enabled health: PASSED on: 66d 7h cycles: 22 ID-3: /dev/sdb type: USB vendor: Generic model: SD MMC size: 29.83 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-4: /dev/sdc type: USB vendor: Lexar model: microSD RDR size: 119.08 GiB block size: physical: 512 B logical: 512 B rev: 0815 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 28.57 GiB size: 28.08 GiB (98.26%) used: 9.17 GiB (32.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 ID-3: /media/pi/128_ext2 raw size: 107.20 GiB size: 105.52 GiB (98.43%) used: 27.40 GiB (26.0%) fs: ext2 block size: 4096 B dev: /dev/sdc2 label: 128_ext2 uuid: d166ba7b-8420-46e2-ba6c-366b2962cbfb ID-4: /media/pi/Elements raw size: 922.17 GiB size: 922.17 GiB (100.00%) used: 54.95 GiB (6.0%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: Elements uuid: 5498D84E98D82FEA Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: partition size: 9.31 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda2 label: 1TB_swap uuid: c8860cef-3e21-4799-9e07-c69d79b16915 ID-2: swap-2 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -3 file: /var/swap Unmounted: ID-1: /dev/sdb1 size: 1024.0 MiB fs: vfat label: big_boot uuid: 992A-A1C9 ID-2: /dev/sdb2 size: 27.83 GiB fs: ext2 label: big_ext2 uuid: 0f2244a6-6b53-4272-b77c-c940f72ee626 ID-3: /dev/sdb3 size: 1.00 GiB fs: swap label: big_swap uuid: 749b92bd-f15e-4e05-9f9f-1a4a794d17ae ID-4: /dev/sdc1 size: 3.81 GiB fs: vfat label: 128_BOOT uuid: FEA2-8227 ID-5: /dev/sdc3 size: 8.07 GiB fs: swap label: 128_swap uuid: f472a6aa-d4c1-4c6b-a44a-712cf2865ef8 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.2:3 info: VIA Labs ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:2813 Device-1: 1-1.3:4 info: Alcor Micro AU6477 Card Reader Controller type: Mass Storage,HID driver: hid-generic,usb-storage,usbhid interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 058f:6364 Hub: 1-1.4:5 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 Device-1: 1-1.4.1:9 info: SHARKOON [Mediatrack Edge Mini Keyboard] type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1ea7:0066 Device-2: 1-1.4.2:7 info: Uni Class type: HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 10d5:55a4 3ò Device-3: 1-1.4.3:8 info: Microdia type: Keyboard driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 0c45:7603 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: Western Digital Elements 25A2 type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 1058:25a2 Hub: 2-2:3 info: VIA Labs ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0813 Device-1: 2-2.4:5 info: Lexar Media microSD RDR UHS-I Card Reader [LRWM03U-7000] type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 05dc:b051 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 223 1: cpu: 3.5% command: chromium-browser-v7 pid: 1440 mem: 82.4 MiB (2.1%) 2: cpu: 1.8% command: xorg pid: 602 mem: 67.1 MiB (1.7%) 3: cpu: 1.7% command: chromium-browser-v7 pid: 1394 mem: 176.7 MiB (4.5%) 4: cpu: 1.6% command: sda1 started by: mount.ntfs pid: 8708 mem: 2.07 MiB (0.0%) 5: cpu: 1.1% command: [usb-storage] pid: 9489 mem: 0.00 MiB (0.0%) Memory top: 5 of 223 1: mem: 179.3 MiB (4.5%) command: chromium-browser-v7 pid: 1535 cpu: 0.4% 2: mem: 176.7 MiB (4.5%) command: chromium-browser-v7 pid: 1394 cpu: 1.7% 3: mem: 138.4 MiB (3.5%) command: chromium-browser-v7 pid: 3569 cpu: 0.3% 4: mem: 89.7 MiB (2.2%) command: chromium-browser-v7 pid: 1559 cpu: 0.4% 5: mem: 85.8 MiB (2.1%) command: chromium-browser-v7 pid: 1484 cpu: 0.1% Info: Processes: 223 Uptime: 11h 51m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.1.03

inxi Results

System:
  Host: raspberrypi Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc 
  v: 4.9.3 
  parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M 
  snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
  snd_bcm2835.enable_headphones=1 cma=256M 
  video=HDMI-A-1:640x480M@60,margin_left=46,margin_right=44,margin_top=24,margin_bottom=32 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
  root=PARTUUID=ea7d04d6-02 rootfstype=ext4 elevator=deadline 
  fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
  Desktop: Xfce 4.12.4 tk: Gtk 2.24.32 info: xfce4-panel wm: xfwm4 
  dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 
  rev: c03111 
Memory:
  RAM: total: 3.89 GiB used: 976.3 MiB (24.5%) gpu: 76.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A 
  bogomips: 472 
  Speed: 656 MHz min/max: 656/2295 MHz Core speeds (MHz): 1: 656 2: 656 
  3: 656 4: 656 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting 
  unloaded: fbdev display ID: :0.0 screens: 1 
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") 
  s-diag: 583mm (23") 
  Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 30 
  size: 1600x900mm (63.0x35.4") diag: 1836mm (72.3") 
  OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.19.118-v7l+ 
Network:
  Message: No ARM data found for this feature. 
  IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX 
  IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global 
  broadcast: 192.168.X.X 
  IP v6: fd20:da22:56a8:e500:9587:9199:fc13:71d4/64 
  type: dynamic noprefixroute scope: global 
  IP v6: fe80::d5a7:3a72:79d:2a98/64 type: noprefixroute scope: link 
  WAN IP: 122.56.X.X 
Drives:
  Local Storage: total: 1.08 TiB used: 91.56 GiB (8.3%) 
  ID-1: /dev/mmcblk0 model: SA32G size: 28.83 GiB block size: 
  physical: 512 B logical: 512 B scheme: MBR 
  SMART Message: Unknown smartctl error. Unable to get data. 
  ID-2: /dev/sda type: USB vendor: Western Digital model: WD Elements 25A2 
  drive model: WD10JMVW-11AJGS4 family: Elements / My Passport (USB, AF) 
  size: 931.48 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 
  speed: 3.0 Gb/s rotation: 5400 rpm 
  drive WD-WXL1A2741RT8 rev: 1014 drive rev: 01.01A01 temp: 31 C 
  scheme: GPT 
  SMART: yes state: enabled health: PASSED on: 66d 7h cycles: 22 
  ID-3: /dev/sdb type: USB vendor: Generic model: SD MMC size: 29.83 GiB 
  block size: physical: 512 B logical: 512 B rev: 1.00 
  scheme: MBR 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  ID-4: /dev/sdc type: USB vendor: Lexar model: microSD RDR size: 119.08 GiB 
  block size: physical: 512 B logical: 512 B rev: 0815 
  scheme: MBR 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 28.57 GiB size: 28.08 GiB (98.26%) 
  used: 9.17 GiB (32.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 
  label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
  ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
  used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
  label: boot uuid: 6341-C9E5 
  ID-3: /media/pi/128_ext2 raw size: 107.20 GiB size: 105.52 GiB (98.43%) 
  used: 27.40 GiB (26.0%) fs: ext2 block size: 4096 B dev: /dev/sdc2 
  label: 128_ext2 uuid: d166ba7b-8420-46e2-ba6c-366b2962cbfb 
  ID-4: /media/pi/Elements raw size: 922.17 GiB size: 922.17 GiB (100.00%) 
  used: 54.95 GiB (6.0%) fs: ntfs block size: 4096 B dev: /dev/sda1 
  label: Elements uuid: 5498D84E98D82FEA 
Swap:
  Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
  ID-1: swap-1 type: partition size: 9.31 GiB used: 0 KiB (0.0%) 
  priority: -2 dev: /dev/sda2 label: 1TB_swap 
  uuid: c8860cef-3e21-4799-9e07-c69d79b16915 
  ID-2: swap-2 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -3 
  file: /var/swap 
Unmounted:
  ID-1: /dev/sdb1 size: 1024.0 MiB fs: vfat label: big_boot uuid: 992A-A1C9 
  ID-2: /dev/sdb2 size: 27.83 GiB fs: ext2 label: big_ext2 
  uuid: 0f2244a6-6b53-4272-b77c-c940f72ee626 
  ID-3: /dev/sdb3 size: 1.00 GiB fs: swap label: big_swap 
  uuid: 749b92bd-f15e-4e05-9f9f-1a4a794d17ae 
  ID-4: /dev/sdc1 size: 3.81 GiB fs: vfat label: 128_BOOT uuid: FEA2-8227 
  ID-5: /dev/sdc3 size: 8.07 GiB fs: swap label: 128_swap 
  uuid: f472a6aa-d4c1-4c6b-a44a-712cf2865ef8 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
  chip ID: 2109:3431 
  Hub: 1-1.2:3 info: VIA Labs ports: 4 rev: 2.1 speed: 480 Mb/s 
  chip ID: 2109:2813 
  Device-1: 1-1.3:4 info: Alcor Micro AU6477 Card Reader Controller 
  type: Mass Storage,HID driver: hid-generic,usb-storage,usbhid 
  interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 058f:6364   Hub: 1-1.4:5 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
  chip ID: 1a40:0101 
  Device-1: 1-1.4.1:9 info: SHARKOON [Mediatrack Edge Mini Keyboard] 
  type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 
  speed: 12 Mb/s chip ID: 1ea7:0066 
  Device-2: 1-1.4.2:7 info: Uni Class type: HID driver: hid-generic,usbhid 
  interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 10d5:55a4 3ò 
  Device-3: 1-1.4.3:8 info: Microdia type: Keyboard 
  driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s 
  chip ID: 0c45:7603 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 
  Device-1: 2-1:2 info: Western Digital Elements 25A2 type: Mass Storage 
  driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1058:25a2 
  Hub: 2-2:3 info: VIA Labs ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip ID: 2109:0813 
  Device-1: 2-2.4:5 
  info: Lexar Media microSD RDR UHS-I Card Reader [LRWM03U-7000] 
  type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 
  speed: 5 Gb/s chip ID: 05dc:b051 
Sensors:
  Message: No sensors data was found. Is sensors configured? 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ buster main
Processes:
  CPU top: 5 of 223 
  1: cpu: 3.5% command: chromium-browser-v7 pid: 1440 mem: 82.4 MiB (2.1%) 
  2: cpu: 1.8% command: xorg pid: 602 mem: 67.1 MiB (1.7%) 
  3: cpu: 1.7% command: chromium-browser-v7 pid: 1394 mem: 176.7 MiB (4.5%) 
  4: cpu: 1.6% command: sda1 started by: mount.ntfs pid: 8708 
  mem: 2.07 MiB (0.0%) 
  5: cpu: 1.1% command: [usb-storage] pid: 9489 mem: 0.00 MiB (0.0%) 
  Memory top: 5 of 223 
  1: mem: 179.3 MiB (4.5%) command: chromium-browser-v7 pid: 1535 cpu: 0.4% 
  2: mem: 176.7 MiB (4.5%) command: chromium-browser-v7 pid: 1394 cpu: 1.7% 
  3: mem: 138.4 MiB (3.5%) command: chromium-browser-v7 pid: 3569 cpu: 0.3% 
  4: mem: 89.7 MiB (2.2%) command: chromium-browser-v7 pid: 1559 cpu: 0.4% 
  5: mem: 85.8 MiB (2.1%) command: chromium-browser-v7 pid: 1484 cpu: 0.1% 
Info:
  Processes: 223 Uptime: 11h 51m Init: systemd v: 241 runlevel: 5 
  target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
  Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.1.03

Benchmark #27994 - Brand: Lexar Micro SD Card USB Reader