Benchmark #28018 - pibenchmarks.com

Brand: OCZ Agility 2 Series
SSD (2.5" SATA)
#771 / 1,679
7
#554 / 1,679
#534 / 984
#107 / 370
6,750
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.sg

Overview
2020-06-25 16:18:32
#28,018
6,183
-567 (-9.17%)
ElektronB
OCZ Agility 2 SATA II 2.5Zoll SSD, 100GB on Pi4 using Samsung USB adapter

Storage Details
OCZ Agility 2 Series
SSD (2.5" SATA)
120G
SSD
OCZ
AGILITY2
Serial
3.00
5,000
1d6b:5136
0x1d6b (Linux Foundation)
0x5136 (ASM1053 SATA 3Gb/s bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
2,000 (+500)
750 (+250)
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
172 MB/s
151.45 MB/s
160.82 MB/s
6,485 IOPS
3,795 IOPS
25,940 KB/s
15,181 KB/s
20,509 KB/s
22,937 KB/s
16,939 KB/s
25,097 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=800 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 1 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 473.8 MiB (11.9%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 479 Speed: 667 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 667 2: 667 3: 667 4: 667 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 115x35 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 111.79 GiB used: 4.30 GiB (3.8%) ID-1: /dev/sda type: USB vendor: OCZ model: AGILITY2 family: Driven SSDs size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rev: 1.11 scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 74d 19h cycles: 15113 read: 8640 GiB written: 13184 GiB Pre-Fail: retired block: 87 threshold: 3 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.22 GiB size: 58.28 GiB (98.41%) used: 4.25 GiB (7.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 5203-DB74 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: D-WAV Scientific eGalax TouchScreen type: HID driver: hid-multitouch,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 0eef:0001 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: ASMedia ASM1053 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:5136 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 151 1: cpu: 30.8% command: octoprint started by: python2 pid: 462 mem: 92.6 MiB (2.4%) 2: cpu: 4.2% command: octodash pid: 764 mem: 94.3 MiB (2.4%) 3: cpu: 3.8% command: init pid: 1 mem: 8.00 MiB (0.2%) 4: cpu: 3.2% command: octodash pid: 722 mem: 110.8 MiB (2.8%) 5: cpu: 1.9% command: octodash pid: 761 mem: 38.6 MiB (1.0%) Memory top: 5 of 151 1: mem: 110.8 MiB (2.8%) command: octodash pid: 722 cpu: 3.2% 2: mem: 94.3 MiB (2.4%) command: octodash pid: 764 cpu: 4.2% 3: mem: 92.6 MiB (2.4%) command: octoprint started by: python2 pid: 462 cpu: 30.8% 4: mem: 57.2 MiB (1.4%) command: octodash pid: 796 cpu: 0.3% 5: mem: 45.6 MiB (1.1%) command: xorg pid: 705 cpu: 0.3% Info: Processes: 151 Uptime: 1m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 4.9/8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1280 
           bcm2708_fb.fbheight=800 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 1 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 473.8 MiB (11.9%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 479 
           Speed: 667 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 667 2: 667 3: 667 4: 667 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 115x35 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 111.79 GiB used: 4.30 GiB (3.8%) 
           ID-1: /dev/sda type: USB vendor: OCZ model: AGILITY2 family: Driven SSDs 
           size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s 
           rev: 1.11 scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 74d 19h cycles: 15113 read: 8640 GiB 
           written: 13184 GiB Pre-Fail: retired block: 87 threshold: 3 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.22 GiB size: 58.28 GiB (98.41%) used: 4.25 GiB (7.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 5203-DB74 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: D-WAV Scientific eGalax TouchScreen type: HID 
           driver: hid-multitouch,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 0eef:0001 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: ASMedia ASM1053 SATA 3Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:5136 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 151 
           1: cpu: 30.8% command: octoprint started by: python2 pid: 462 mem: 92.6 MiB (2.4%) 
           2: cpu: 4.2% command: octodash pid: 764 mem: 94.3 MiB (2.4%) 
           3: cpu: 3.8% command: init pid: 1 mem: 8.00 MiB (0.2%) 
           4: cpu: 3.2% command: octodash pid: 722 mem: 110.8 MiB (2.8%) 
           5: cpu: 1.9% command: octodash pid: 761 mem: 38.6 MiB (1.0%) 
           Memory top: 5 of 151 
           1: mem: 110.8 MiB (2.8%) command: octodash pid: 722 cpu: 3.2% 
           2: mem: 94.3 MiB (2.4%) command: octodash pid: 764 cpu: 4.2% 
           3: mem: 92.6 MiB (2.4%) command: octoprint started by: python2 pid: 462 cpu: 30.8% 
           4: mem: 57.2 MiB (1.4%) command: octodash pid: 796 cpu: 0.3% 
           5: mem: 45.6 MiB (1.1%) command: xorg pid: 705 cpu: 0.3% 
Info:      Processes: 151 Uptime: 1m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 4.9/8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #28018 - Brand: OCZ Agility 2 Series