Benchmark #28042 - pibenchmarks.com

Brand: AData SU630
SSD (2.5" SATA)
#59 / 1,539
175
#673 / 1,539
#647 / 875
#225 / 363
5,323
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-26 02:46:02
#28,042
5,263
-60 (-1.14%)
Anonymous
ADATA SD600Q 250GB on PI4

Storage Details
AData SU630
SSD (2.5" SATA)
240G
SSD
AData
SU630
2.5 inch
SATA
3.00
5,000
1d6b:a88a
0x1d6b (Linux Foundation)
0xa88a
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
84.9 MB/s
394.81 MB/s
398.29 MB/s
6,703 IOPS
10,638 IOPS
26,815 KB/s
42,555 KB/s
26,038 KB/s
4,490 KB/s
11,425 KB/s
25,457 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.71-rt24-v7l armv7l bits: 32 compiler: gcc v: 4.8.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=ec830e8f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 277.2 MiB (7.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 compositor: xcompmgr driver: fbdev unloaded: modesetting tty: 237x71 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X WAN IP: 46.94.X.X Drives: Local Storage: total: 238.32 GiB used: 12.70 GiB (5.3%) ID-1: /dev/mmcblk0 model: USD00 size: 14.75 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: A-Data model: SD600Q size: 223.57 GiB block size: physical: 4096 B logical: 512 B rev: 9301 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.50 GiB size: 14.21 GiB (98.00%) used: 6.29 GiB (44.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.7 MiB (21.3%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: A764-6923 ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 57.8 MiB (22.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 ID-4: /media/pi/rootfs raw size: 14.50 GiB size: 14.21 GiB (98.01%) used: 6.30 GiB (44.3%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: A-DATA type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 125f:a88a Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 158 1: cpu: 1.2% command: packagekitd pid: 1215 mem: 13.0 MiB (0.3%) 2: cpu: 0.4% command: bash pid: 1073 mem: 2.82 MiB (0.0%) 3: cpu: 0.3% command: [kworker/0:1-events] pid: 1222 mem: 0.00 MiB (0.0%) 4: cpu: 0.2% command: sudo pid: 1068 mem: 3.28 MiB (0.0%) 5: cpu: 0.1% command: init pid: 1 mem: 7.74 MiB (0.1%) Memory top: 5 of 158 1: mem: 65.4 MiB (1.6%) command: xorg pid: 521 cpu: 0.0% 2: mem: 28.7 MiB (0.7%) command: lxpanel pid: 685 cpu: 0.0% 3: mem: 22.3 MiB (0.5%) command: pcmanfm pid: 686 cpu: 0.0% 4: mem: 14.8 MiB (0.3%) command: openbox pid: 680 cpu: 0.0% 5: mem: 13.0 MiB (0.3%) command: packagekitd pid: 1215 cpu: 1.2% Info: Processes: 158 Uptime: 52m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Starage.sh (sudo) inxi: 3.1.03

inxi Results

System:    Host: raspberrypi Kernel: 4.19.71-rt24-v7l armv7l bits: 32 compiler: gcc v: 4.8.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 
           root=PARTUUID=ec830e8f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: N/A DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
Memory:    RAM: total: 3.89 GiB used: 277.2 MiB (7.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 compositor: xcompmgr driver: fbdev unloaded: modesetting tty: 237x71 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           WAN IP: 46.94.X.X 
Drives:    Local Storage: total: 238.32 GiB used: 12.70 GiB (5.3%) 
           ID-1: /dev/mmcblk0 model: USD00 size: 14.75 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: A-Data model: SD600Q size: 223.57 GiB block size: physical: 4096 B logical: 512 B 
           rev: 9301 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.50 GiB size: 14.21 GiB (98.00%) used: 6.29 GiB (44.3%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: rootfs uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.7 MiB (21.3%) fs: vfat block size: 512 B 
           dev: /dev/sda1 label: boot uuid: A764-6923 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 57.8 MiB (22.9%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 
           ID-4: /media/pi/rootfs raw size: 14.50 GiB size: 14.21 GiB (98.01%) used: 6.30 GiB (44.3%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: usbhid interfaces: 3 rev: 2.0 
           speed: 12 Mb/s chip ID: 046d:c52b 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: A-DATA type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 125f:a88a            Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 158 
           1: cpu: 1.2% command: packagekitd pid: 1215 mem: 13.0 MiB (0.3%) 
           2: cpu: 0.4% command: bash pid: 1073 mem: 2.82 MiB (0.0%) 
           3: cpu: 0.3% command: [kworker/0:1-events] pid: 1222 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.2% command: sudo pid: 1068 mem: 3.28 MiB (0.0%) 
           5: cpu: 0.1% command: init pid: 1 mem: 7.74 MiB (0.1%) 
           Memory top: 5 of 158 
           1: mem: 65.4 MiB (1.6%) command: xorg pid: 521 cpu: 0.0% 
           2: mem: 28.7 MiB (0.7%) command: lxpanel pid: 685 cpu: 0.0% 
           3: mem: 22.3 MiB (0.5%) command: pcmanfm pid: 686 cpu: 0.0% 
           4: mem: 14.8 MiB (0.3%) command: openbox pid: 680 cpu: 0.0% 
           5: mem: 13.0 MiB (0.3%) command: packagekitd pid: 1215 cpu: 1.2% 
Info:      Processes: 158 Uptime: 52m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
           Shell: Starage.sh (sudo) inxi: 3.1.03

Benchmark #28042 - Brand: AData SU630