Benchmark #28062 - pibenchmarks.com

Brand: Patriot Burst Series
SSD (2.5" SATA)
#125 / 1,679
143
#566 / 1,679
#545 / 984
#111 / 370
6,677
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-26 06:53:31
#28,062
9,413
+2,736 (+29.07%)
Greg
Patriot_Burst on USB 3 on Pi4

Storage Details
Patriot Burst Series
SSD (2.5" SATA)
240G
SSD
Patriot
Burst
2.5 inch
SATA
3.00
5,000
174c:1351
0x174c (ASMedia Technology Inc.)
0x1351
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
29.3 MB/s
274.68 MB/s
226.18 MB/s
2,118 IOPS
18,123 IOPS
8,474 KB/s
72,495 KB/s
88,560 KB/s
30,865 KB/s
87,052 KB/s
35,038 KB/s

inxi Results
System: Host: rp4 Kernel: 5.4.42-v8+ aarch64 bits: 64 compiler: gcc v: 5.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=5073d1a1-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory Console: N/A Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 Memory: RAM: total: 7.71 GiB used: 349.8 MiB (4.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 97x26 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.42-v8+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::b1aa:50e5:cdfe:ef6f/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 91.141.X.X Drives: Local Storage: total: 372.54 GiB used: 3.87 GiB (1.0%) ID-1: /dev/mmcblk0 model: AGGCD size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Intenso model: SSD SATAIII size: 119.24 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: S0424A0 temp: 40 C scheme: MBR SMART: yes state: enabled health: PASSED cycles: 30 read: 34 KiB written: 106 KiB ID-3: /dev/sdb type: USB vendor: Patriot model: Burst size: 223.57 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: SBFM91.2 temp: 33 C scheme: GPT SMART: yes state: enabled health: PASSED on: 63d 14h cycles: 91 written: 459 KiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.95 GiB (98.24%) used: 3.67 GiB (12.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: eae7cc40-f1d2-4bf1-8b9b-ccab61498abe ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 54.5 MiB (21.6%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F8C9-55AB ID-3: /mnt/disk raw size: 223.44 GiB size: 223.44 GiB (100.00%) used: 148.2 MiB (0.1%) fs: ntfs block size: 4096 B dev: /dev/sdb2 label: New Volume uuid: 1200E41600E40319 ID-4: /snap/core/9290 raw size: 85.9 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A ID-5: /snap/microk8s/1500 raw size: 176.7 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: ADCE-87F5 ID-2: /dev/sda2 size: 118.99 GiB fs: ext4 label: N/A uuid: 5ff721e9-8589-4b35-8eb8-7e141262ec73 ID-3: /dev/sdb1 size: 128.0 MiB fs: N/A label: N/A uuid: N/A USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Device-2: 2-2:3 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 174c:1351 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian buster main contrib non-free 2: deb http://deb.debian.org/debian-security/ buster/updates main contrib non-free 3: deb http://deb.debian.org/debian buster-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 150 1: cpu: 4.5% command: run-flanneld-with-args started by: bash pid: 5215 mem: 2.96 MiB (0.0%) 2: cpu: 1.8% command: kubelet pid: 1341 mem: 80.3 MiB (1.0%) 3: cpu: 1.4% command: init pid: 1 mem: 9.20 MiB (0.1%) 4: cpu: 1.2% command: containerd pid: 495 mem: 45.1 MiB (0.5%) 5: cpu: 1.0% command: gunicorn3 started by: python3 pid: 765 mem: 23.2 MiB (0.2%) Memory top: 5 of 150 1: mem: 80.3 MiB (1.0%) command: kubelet pid: 1341 cpu: 1.8% 2: mem: 45.1 MiB (0.5%) command: containerd pid: 495 cpu: 1.2% 3: mem: 34.4 MiB (0.4%) command: kube-proxy pid: 500 cpu: 0.8% 4: mem: 29.0 MiB (0.3%) command: gunicorn3 started by: python3 pid: 1606 cpu: 0.5% 5: mem: 27.4 MiB (0.3%) command: snapd pid: 431 cpu: 0.6% Info: Processes: 150 Uptime: 4m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.1.03

inxi Results

System:    Host: rp4 Kernel: 5.4.42-v8+ aarch64 bits: 64 compiler: gcc v: 5.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=5073d1a1-02 rootfstype=ext4 elevator=deadline fsck.repair=yes 
           rootwait quiet splash plymouth.ignore-serial-consoles cgroup_enable=cpuset 
           cgroup_memory=1 cgroup_enable=memory 
           Console: N/A Distro: Debian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 
           rev: d03114 
Memory:    RAM: total: 7.71 GiB used: 349.8 MiB (4.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 97x26 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k5.4.42-v8+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global 
           broadcast: 192.168.X.X 
           IP v6: fe80::b1aa:50e5:cdfe:ef6f/64 scope: link 
           IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 91.141.X.X 
Drives:    Local Storage: total: 372.54 GiB used: 3.87 GiB (1.0%) 
           ID-1: /dev/mmcblk0 model: AGGCD size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Intenso model: SSD SATAIII size: 119.24 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s 
           rev: S0424A0 temp: 40 C scheme: MBR 
           SMART: yes state: enabled health: PASSED cycles: 30 read: 34 KiB written: 106 KiB 
           ID-3: /dev/sdb type: USB vendor: Patriot model: Burst size: 223.57 GiB block size: 
           physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s 
           rev: SBFM91.2 temp: 33 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 63d 14h cycles: 91 written: 459 KiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.47 GiB size: 28.95 GiB (98.24%) used: 3.67 GiB (12.7%) 
           fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: eae7cc40-f1d2-4bf1-8b9b-ccab61498abe 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 54.5 MiB (21.6%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F8C9-55AB 
           ID-3: /mnt/disk raw size: 223.44 GiB size: 223.44 GiB (100.00%) 
           used: 148.2 MiB (0.1%) fs: ntfs block size: 4096 B dev: /dev/sdb2 
           label: New Volume uuid: 1200E41600E40319 
           ID-4: /snap/core/9290 raw size: 85.9 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A 
           ID-5: /snap/microk8s/1500 raw size: 176.7 MiB size: N/A (hidden?) 
           used: N/A (hidden?) fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 
           file: /var/swap 
Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: ADCE-87F5 
           ID-2: /dev/sda2 size: 118.99 GiB fs: ext4 label: N/A 
           uuid: 5ff721e9-8589-4b35-8eb8-7e141262ec73 
           ID-3: /dev/sdb1 size: 128.0 MiB fs: N/A label: N/A uuid: N/A 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 174c:55aa 
           Device-2: 2-2:3 info: ASMedia type: Mass Storage driver: uas interfaces: 1 
           rev: 3.1 speed: 5 Gb/s chip ID: 174c:1351 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://deb.debian.org/debian buster main contrib non-free
           2: deb http://deb.debian.org/debian-security/ buster/updates main contrib non-free
           3: deb http://deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 150 
           1: cpu: 4.5% command: run-flanneld-with-args started by: bash pid: 5215 
           mem: 2.96 MiB (0.0%) 
           2: cpu: 1.8% command: kubelet pid: 1341 mem: 80.3 MiB (1.0%) 
           3: cpu: 1.4% command: init pid: 1 mem: 9.20 MiB (0.1%) 
           4: cpu: 1.2% command: containerd pid: 495 mem: 45.1 MiB (0.5%) 
           5: cpu: 1.0% command: gunicorn3 started by: python3 pid: 765 mem: 23.2 MiB (0.2%) 
           Memory top: 5 of 150 
           1: mem: 80.3 MiB (1.0%) command: kubelet pid: 1341 cpu: 1.8% 
           2: mem: 45.1 MiB (0.5%) command: containerd pid: 495 cpu: 1.2% 
           3: mem: 34.4 MiB (0.4%) command: kube-proxy pid: 500 cpu: 0.8% 
           4: mem: 29.0 MiB (0.3%) command: gunicorn3 started by: python3 pid: 1606 cpu: 0.5% 
           5: mem: 27.4 MiB (0.3%) command: snapd pid: 431 cpu: 0.6% 
Info:      Processes: 150 Uptime: 4m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) 
           inxi: 3.1.03

Benchmark #28062 - Brand: Patriot Burst Series