Benchmark #28064 - pibenchmarks.com

Brand: Steelram FS200 USB pSSD
SSD (Portable)
#270 / 1,539
33
#1,262 / 1,539
#870 / 875
#133 / 137
1,014
	AliExpress

Overview
2020-06-26 07:09:57
#28,064
553
-461 (-83.36%)
Anonymous

Storage Details
Steelram FS200 USB pSSD
SSD (Portable)
58.8G
SSD
Steelram
SteelRamA01
2.00
480
2109:0a01
0x2109
0x0a01 (USB Headset)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
8.3 MB/s
32.17 MB/s
31.73 MB/s
154 IOPS
866 IOPS
617 KB/s
3,465 KB/s
15,632 KB/s
1,245 KB/s
5,098 KB/s
492 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=f6cf4bd4-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 762.1 MiB (19.1%) gpu: 512.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 102 size: 476x268mm (18.7x10.6") diag: 546mm (21.5") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 59.00 GiB used: 9.76 GiB (16.5%) ID-1: /dev/sda type: USB vendor: Seagate model: SteelRam A01 size: 59.00 GiB block size: physical: 512 B logical: 512 B rev: PMAP scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 58.75 GiB size: 57.57 GiB (98.00%) used: 9.71 GiB (16.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 9b87f948-9dc3-49e7-94fc-309bfabb1ac4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: BC50-2AE4 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.2:3 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 7788:0a01 Hub: 1-1.3:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0608 Hub: 1-1.4:5 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0608 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ftp.jaist.ac.jp/raspbian/ buster main contrib non-free rpi 2: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/vivaldi.list 1: deb http: //repo.vivaldi.com/stable/deb/ stable main Processes: CPU top: 5 of 153 1: cpu: 2.1% command: lxpanel pid: 813 mem: 32.0 MiB (0.9%) 2: cpu: 1.5% command: lxterminal pid: 1156 mem: 53.0 MiB (1.5%) 3: cpu: 0.9% command: xorg pid: 493 mem: 52.2 MiB (1.5%) 4: cpu: 0.2% command: init pid: 1 mem: 7.89 MiB (0.2%) 5: cpu: 0.2% command: packagekitd pid: 1420 mem: 13.2 MiB (0.3%) Memory top: 5 of 153 1: mem: 53.0 MiB (1.5%) command: lxterminal pid: 1156 cpu: 1.5% 2: mem: 52.2 MiB (1.5%) command: xorg pid: 493 cpu: 0.9% 3: mem: 36.2 MiB (1.0%) command: fcitx pid: 767 cpu: 0.0% 4: mem: 32.0 MiB (0.9%) command: lxpanel pid: 813 cpu: 2.1% 5: mem: 28.9 MiB (0.8%) command: vncserver-x11-core pid: 463 cpu: 0.1% Info: Processes: 153 Uptime: 19m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=f6cf4bd4-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 762.1 MiB (19.1%) gpu: 512.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 102 size: 476x268mm (18.7x10.6") 
           diag: 546mm (21.5") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 59.00 GiB used: 9.76 GiB (16.5%) 
           ID-1: /dev/sda type: USB vendor: Seagate model: SteelRam A01 size: 59.00 GiB 
           block size: physical: 512 B logical: 512 B rev: PMAP scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 58.75 GiB size: 57.57 GiB (98.00%) used: 9.71 GiB (16.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 9b87f948-9dc3-49e7-94fc-309bfabb1ac4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: BC50-2AE4 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.2:3 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.1 speed: 480 Mb/s chip ID: 7788:0a01 Hub: 1-1.3:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0608 
           Hub: 1-1.4:5 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0608 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ftp.jaist.ac.jp/raspbian/ buster main contrib non-free rpi
           2: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/vivaldi.list 
           1: deb http: //repo.vivaldi.com/stable/deb/ stable main
Processes: CPU top: 5 of 153 
           1: cpu: 2.1% command: lxpanel pid: 813 mem: 32.0 MiB (0.9%) 
           2: cpu: 1.5% command: lxterminal pid: 1156 mem: 53.0 MiB (1.5%) 
           3: cpu: 0.9% command: xorg pid: 493 mem: 52.2 MiB (1.5%) 
           4: cpu: 0.2% command: init pid: 1 mem: 7.89 MiB (0.2%) 
           5: cpu: 0.2% command: packagekitd pid: 1420 mem: 13.2 MiB (0.3%) 
           Memory top: 5 of 153 
           1: mem: 53.0 MiB (1.5%) command: lxterminal pid: 1156 cpu: 1.5% 
           2: mem: 52.2 MiB (1.5%) command: xorg pid: 493 cpu: 0.9% 
           3: mem: 36.2 MiB (1.0%) command: fcitx pid: 767 cpu: 0.0% 
           4: mem: 32.0 MiB (0.9%) command: lxpanel pid: 813 cpu: 2.1% 
           5: mem: 28.9 MiB (0.8%) command: vncserver-x11-core pid: 463 cpu: 0.1% 
Info:      Processes: 153 Uptime: 19m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #28064 - Brand: Steelram FS200 USB pSSD