Benchmark #28095 - pibenchmarks.com

Brand: Genesys USB SD Card Reader
USB Flash
#334 / 1,539
23
#1,290 / 1,539
#47 / 90
#47 / 86
937
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.sg

Overview
2020-06-26 17:04:46
#28,095
2,289
+1,352 (+59.07%)
Anonymous
test

Storage Details
Genesys USB SD Card Reader
USB Flash
57.4G
USB Flash
Genesys
UFD
3.00
5,000
05e3:0756
0x05e3
0x0756
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
4 GB
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
77.9 MB/s
153.85 MB/s
121.45 MB/s
1,636 IOPS
2,484 IOPS
6,547 KB/s
9,938 KB/s
9,969 KB/s
5,403 KB/s
9,792 KB/s
6,928 KB/s

inxi Results
System: Host: andros4 Kernel: 4.19.115-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash console=ttyS0,115200 Console: N/A DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 478.1 MiB (12.0%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbturbo tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.115-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X IF-ID-2: eth0.101 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-3: eth0.102 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-4: eth0.103 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX WAN IP: 94.65.X.X Drives: Local Storage: total: 72.45 GiB used: 16.62 GiB (22.9%) ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: Genesys UFD size: 57.62 GiB block size: physical: 512 B logical: 512 B rev: 1855 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 57.36 GiB size: 56.33 GiB (98.21%) used: 16.56 GiB (29.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed ID-2: /boot raw size: 256.0 MiB size: 255.7 MiB (99.89%) used: 53.7 MiB (21.0%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 3FFE-CDCA Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 3FFE-CDCA ID-2: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Genesys Logic type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 05e3:0756 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/connectify.list 1: deb http://apt.connectify.me/ speedify main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 182 1: cpu: 5.0% command: ffmpeg pid: 1526 mem: 12.0 MiB (0.3%) 2: cpu: 4.3% command: ffmpeg pid: 1525 mem: 11.3 MiB (0.2%) 3: cpu: 2.0% command: init pid: 1 mem: 7.89 MiB (0.2%) 4: cpu: 0.9% command: [kworker/u8:1-events_unbound] pid: 42 mem: 0.00 MiB (0.0%) 5: cpu: 0.9% command: [usb-storage] pid: 87 mem: 0.00 MiB (0.0%) Memory top: 5 of 182 1: mem: 69.1 MiB (1.7%) command: pi-greeter pid: 1203 cpu: 0.6% 2: mem: 52.6 MiB (1.3%) command: xorg pid: 998 cpu: 0.4% 3: mem: 49.8 MiB (1.2%) command: rpc.statd pid: 807 cpu: 0.0% 4: mem: 25.7 MiB (0.6%) command: rpc.mountd pid: 814 cpu: 0.0% 5: mem: 17.8 MiB (0.4%) command: pihole-ftl pid: 1319 cpu: 0.4% Info: Processes: 182 Uptime: 4m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh inxi: 3.1.03

inxi Results

System:
  Host: andros4 Kernel: 4.19.115-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
  parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M 
  bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 
  root=/dev/sda2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
  quiet splash console=ttyS0,115200 
  Console: N/A DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 
  rev: c03112 
Memory:
  RAM: total: 3.89 GiB used: 478.1 MiB (12.0%) gpu: 128.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A 
  bogomips: 1080 
  Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 
  3: 1500 4: 1500 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.org 1.20.4 driver: fbturbo tty: 80x24 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.19.115-v7l+ 
Network:
  Message: No ARM data found for this feature. 
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X 
  IF-ID-2: eth0.101 state: up speed: 1000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IF-ID-3: eth0.102 state: up speed: 1000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IF-ID-4: eth0.103 state: up speed: 1000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  WAN IP: 94.65.X.X 
Drives:
  Local Storage: total: 72.45 GiB used: 16.62 GiB (22.9%) 
  ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: 
  physical: 512 B logical: 512 B scheme: MBR 
  SMART Message: Unknown smartctl error. Unable to get data. 
  ID-2: /dev/sda type: USB model: Genesys UFD size: 57.62 GiB block size: 
  physical: 512 B logical: 512 B rev: 1855 
  scheme: MBR 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 57.36 GiB size: 56.33 GiB (98.21%) 
  used: 16.56 GiB (29.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 
  label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed 
  ID-2: /boot raw size: 256.0 MiB size: 255.7 MiB (99.89%) 
  used: 53.7 MiB (21.0%) fs: vfat block size: 512 B dev: /dev/sda1 
  label: boot uuid: 3FFE-CDCA 
Swap:
  Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
  ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 
  file: /var/swap 
Unmounted:
  ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 3FFE-CDCA 
  ID-2: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs 
  uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
  chip ID: 2109:3431 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 
  Device-1: 2-2:2 info: Genesys Logic type: Mass Storage driver: usb-storage 
  interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 05e3:0756 Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/connectify.list 
  1: deb http://apt.connectify.me/ speedify main
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ buster main
Processes:
  CPU top: 5 of 182 
  1: cpu: 5.0% command: ffmpeg pid: 1526 mem: 12.0 MiB (0.3%) 
  2: cpu: 4.3% command: ffmpeg pid: 1525 mem: 11.3 MiB (0.2%) 
  3: cpu: 2.0% command: init pid: 1 mem: 7.89 MiB (0.2%) 
  4: cpu: 0.9% command: [kworker/u8:1-events_unbound] pid: 42 
  mem: 0.00 MiB (0.0%) 
  5: cpu: 0.9% command: [usb-storage] pid: 87 mem: 0.00 MiB (0.0%) 
  Memory top: 5 of 182 
  1: mem: 69.1 MiB (1.7%) command: pi-greeter pid: 1203 cpu: 0.6% 
  2: mem: 52.6 MiB (1.3%) command: xorg pid: 998 cpu: 0.4% 
  3: mem: 49.8 MiB (1.2%) command: rpc.statd pid: 807 cpu: 0.0% 
  4: mem: 25.7 MiB (0.6%) command: rpc.mountd pid: 814 cpu: 0.0% 
  5: mem: 17.8 MiB (0.4%) command: pihole-ftl pid: 1319 cpu: 0.4% 
Info:
  Processes: 182 Uptime: 4m Init: systemd v: 241 runlevel: 5 
  target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh 
  inxi: 3.1.03

Benchmark #28095 - Brand: Genesys USB SD Card Reader