Benchmark #28153 - pibenchmarks.com

Brand: Buffalo SHD-PE Portable HDD
HDD (Portable)
#659 / 1,539
6
#1,359 / 1,539
#64 / 66
#0 / 22
694
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-27 10:00:19
#28,153
535
-159 (-29.72%)
Anonymous
Buffalo 1Gb

Storage Details
Buffalo SHD-PE Portable HDD
HDD (Portable)
931.3G
HDD
Buffalo
ExternalHDD
2.00
480
2109:0105
0x2109
0x0105 (External Hard Drive HD-CEU2 [Drive Station])
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
20.5 MB/s
22.58 MB/s
33.37 MB/s
326 IOPS
94 IOPS
1,306 KB/s
377 KB/s
8,125 KB/s
7,470 KB/s
318 KB/s
1,261 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=fa8dce7a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 1.04 GiB (26.8%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: WAN IP: Drives: Local Storage: total: 960.30 GiB used: 10.01 GiB (1.0%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 28.79 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Buffalo model: External HDD size: 931.51 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 931.26 GiB size: 915.64 GiB (98.32%) used: 9.87 GiB (1.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: NEWPI uuid: 0ddd4a38-66b9-4224-8a01-33068b861ec4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 144.9 MiB (57.5%) fs: vfat block size: 512 B dev: /dev/sda1 label: N/A uuid: F644-7B3A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 2.00 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile ID-2: swap-2 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -3 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 ID-2: /dev/mmcblk0p2 size: 28.53 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.2:3 info: BUFFALO (formerly Mel ) External Hard Drive HD-CEU2 [Drive Station] type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0411:0105 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb-src http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/debian-backports.list 1: deb http: //httpredir.debian.org/debian buster-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/golift.list 1: deb https: //dl.bintray.com/golift/ubuntu bionic main Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https: //repos.influxdata.com/debian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/unstable.list 1: deb http: //deb.debian.org/debian/ unstable main Processes: CPU top: 5 of 121 1: cpu: 90.6% command: influxd pid: 531 mem: 899.4 MiB (23.0%) 2: cpu: 2.5% command: java pid: 851 mem: 186.4 MiB (4.7%) 3: cpu: 1.3% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 4: cpu: 0.4% command: mongod pid: 327 mem: 37.4 MiB (0.9%) 5: cpu: 0.4% command: bin/mongod pid: 910 mem: 128.0 MiB (3.2%) Memory top: 5 of 121 1: mem: 899.4 MiB (23.0%) command: influxd pid: 531 cpu: 90.6% 2: mem: 186.4 MiB (4.7%) command: java pid: 851 cpu: 2.5% 3: mem: 128.0 MiB (3.2%) command: bin/mongod pid: 910 cpu: 0.4% 4: mem: 49.6 MiB (1.2%) command: unifi pid: 602 cpu: 0.0% 5: mem: 44.7 MiB (1.1%) command: grafana-server pid: 532 cpu: 0.0% Info: Processes: 121 Uptime: 21h 02m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=fa8dce7a-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 1.04 GiB (26.8%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 960.30 GiB used: 10.01 GiB (1.0%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 28.79 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Buffalo model: External HDD size: 931.51 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 931.26 GiB size: 915.64 GiB (98.32%) used: 9.87 GiB (1.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: NEWPI 
           uuid: 0ddd4a38-66b9-4224-8a01-33068b861ec4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 144.9 MiB (57.5%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: N/A uuid: F644-7B3A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 2.00 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile 
           ID-2: swap-2 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -3 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
           ID-2: /dev/mmcblk0p2 size: 28.53 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.2:3 
           info: BUFFALO (formerly Mel ) External Hard Drive HD-CEU2 [Drive Station] 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0411:0105 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb-src http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/debian-backports.list 
           1: deb http: //httpredir.debian.org/debian buster-backports main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/golift.list 
           1: deb https: //dl.bintray.com/golift/ubuntu bionic main
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list 
           1: deb https: //repos.influxdata.com/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/unstable.list 
           1: deb http: //deb.debian.org/debian/ unstable main
Processes: CPU top: 5 of 121 
           1: cpu: 90.6% command: influxd pid: 531 mem: 899.4 MiB (23.0%) 
           2: cpu: 2.5% command: java pid: 851 mem: 186.4 MiB (4.7%) 
           3: cpu: 1.3% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.4% command: mongod pid: 327 mem: 37.4 MiB (0.9%) 
           5: cpu: 0.4% command: bin/mongod pid: 910 mem: 128.0 MiB (3.2%) 
           Memory top: 5 of 121 
           1: mem: 899.4 MiB (23.0%) command: influxd pid: 531 cpu: 90.6% 
           2: mem: 186.4 MiB (4.7%) command: java pid: 851 cpu: 2.5% 
           3: mem: 128.0 MiB (3.2%) command: bin/mongod pid: 910 cpu: 0.4% 
           4: mem: 49.6 MiB (1.2%) command: unifi pid: 602 cpu: 0.0% 
           5: mem: 44.7 MiB (1.1%) command: grafana-server pid: 532 cpu: 0.0% 
Info:      Processes: 121 Uptime: 21h 02m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #28153 - Brand: Buffalo SHD-PE Portable HDD