Benchmark #28179 - pibenchmarks.com

Brand: Samsung 840 EVO
SSD (2.5" SATA)
#44 / 1,672
330
#578 / 1,672
#559 / 983
#120 / 370
6,568
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-27 14:40:29
#28,179
8,638
+2,070 (+23.96%)
barnybug
Samsung 840 EVO SSD on Pi 4 ArchLinux using Eluteng SATA to USB

Storage Details
Samsung 840 EVO
SSD (2.5" SATA)
250G
SSD
Samsung
SSD840EVO250GB
SATA
3.00
5,000
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Arch Linux ARM
armv7l

Benchmark Results
224 MB/s
266.85 MB/s
265.22 MB/s
8,393 IOPS
28,723 IOPS
33,573 KB/s
114,894 KB/s
21,910 KB/s
23,358 KB/s
22,144 KB/s
30,176 KB/s

inxi Results
System: Host: raspi Kernel: 5.4.42-1-ARCH armv7l bits: 32 compiler: gcc v: 9.3.0 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 root=PARTUUID=824a8da2-02 rw rootwait console=ttyS0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200 elevator=noop Console: N/A Distro: Arch Linux ARM Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Memory: RAM: total: 3.81 GiB used: 182.3 MiB (4.7%) gpu: 64.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 216x66 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.42-1-ARCH Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X IP v6: fdda:2c2f:b7a4::b2c/128 type: noprefixroute scope: global IP v6: fdda:2c2f:b7a4:0:dea6:32ff:fe3b:c46f/64 type: mngtmpaddr noprefixroute scope: global IP v6: fe80::dea6:32ff:fe3b:c46f/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 84.92.X.X Drives: Local Storage: total: 232.89 GiB used: 1.66 GiB (0.7%) SMART Message: Required tool smartctl not installed. Check --recommends ID-1: /dev/sda type: USB vendor: Samsung model: SSD 840 EVO 250GB size: 232.89 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 232.76 GiB size: 228.11 GiB (98.00%) used: 1.63 GiB (0.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: 73f43a43-6b20-4bd2-860c-e9d385265dcc ID-2: /boot raw size: 96.0 MiB size: 95.8 MiB (99.79%) used: 37.5 MiB (39.1%) fs: vfat block size: 512 B dev: /dev/sda1 label: N/A uuid: 50E9-2506 Swap: Alert: No Swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active pacman repo servers in: /etc/pacman.d/mirrorlist 1: http://mirror.archlinuxarm.org/$arch/$repo Processes: CPU top: 5 of 130 1: cpu: 0.5% command: sudo pid: 11983 mem: 5.05 MiB (0.1%) 2: cpu: 0.5% command: bash pid: 11984 mem: 2.65 MiB (0.0%) 3: cpu: 0.3% command: [irq/40-mmc0] pid: 190 mem: 0.00 MiB (0.0%) 4: cpu: 0.3% command: [kworker/2:2-mm_percpu_wq] pid: 1067 mem: 0.00 MiB (0.0%) 5: cpu: 0.3% command: [kworker/2:0-events] pid: 1095 mem: 0.00 MiB (0.0%) Memory top: 5 of 130 1: mem: 18.2 MiB (0.4%) command: systemd-journald pid: 284 cpu: 0.0% 2: mem: 12.8 MiB (0.3%) command: systemd-resolved pid: 341 cpu: 0.0% 3: mem: 11.8 MiB (0.3%) command: dirmngr pid: 6590 cpu: 0.1% 4: mem: 8.66 MiB (0.2%) command: init pid: 1 cpu: 0.1% 5: mem: 7.62 MiB (0.1%) command: systemd pid: 889 cpu: 0.0% Info: Processes: 130 Uptime: 1h 17m Init: systemd v: 245 Compilers: gcc: 9.3.0 Shell: Storage.sh (sudo) inxi: 3.1.03

inxi Results

System:    Host: raspi Kernel: 5.4.42-1-ARCH armv7l bits: 32 compiler: gcc v: 9.3.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 root=PARTUUID=824a8da2-02 
           rw rootwait console=ttyS0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N 
           dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200 elevator=noop 
           Console: N/A Distro: Arch Linux ARM 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 
Memory:    RAM: total: 3.81 GiB used: 182.3 MiB (4.7%) gpu: 64.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 216x66 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k5.4.42-1-ARCH 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X 
           IP v6: fdda:2c2f:b7a4::b2c/128 type: noprefixroute scope: global 
           IP v6: fdda:2c2f:b7a4:0:dea6:32ff:fe3b:c46f/64 type: mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::dea6:32ff:fe3b:c46f/64 scope: link 
           IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 84.92.X.X 
Drives:    Local Storage: total: 232.89 GiB used: 1.66 GiB (0.7%) 
           SMART Message: Required tool smartctl not installed. Check --recommends 
           ID-1: /dev/sda type: USB vendor: Samsung model: SSD 840 EVO 250GB size: 232.89 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 232.76 GiB size: 228.11 GiB (98.00%) used: 1.63 GiB (0.7%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: N/A uuid: 73f43a43-6b20-4bd2-860c-e9d385265dcc 
           ID-2: /boot raw size: 96.0 MiB size: 95.8 MiB (99.79%) used: 37.5 MiB (39.1%) fs: vfat block size: 512 B 
           dev: /dev/sda1 label: N/A uuid: 50E9-2506 
Swap:      Alert: No Swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge 
           ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active pacman repo servers in: /etc/pacman.d/mirrorlist 
           1: http://mirror.archlinuxarm.org/$arch/$repo
Processes: CPU top: 5 of 130 
           1: cpu: 0.5% command: sudo pid: 11983 mem: 5.05 MiB (0.1%) 
           2: cpu: 0.5% command: bash pid: 11984 mem: 2.65 MiB (0.0%) 
           3: cpu: 0.3% command: [irq/40-mmc0] pid: 190 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.3% command: [kworker/2:2-mm_percpu_wq] pid: 1067 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.3% command: [kworker/2:0-events] pid: 1095 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 130 
           1: mem: 18.2 MiB (0.4%) command: systemd-journald pid: 284 cpu: 0.0% 
           2: mem: 12.8 MiB (0.3%) command: systemd-resolved pid: 341 cpu: 0.0% 
           3: mem: 11.8 MiB (0.3%) command: dirmngr pid: 6590 cpu: 0.1% 
           4: mem: 8.66 MiB (0.2%) command: init pid: 1 cpu: 0.1% 
           5: mem: 7.62 MiB (0.1%) command: systemd pid: 889 cpu: 0.0% 
Info:      Processes: 130 Uptime: 1h 17m Init: systemd v: 245 Compilers: gcc: 9.3.0 Shell: Storage.sh (sudo) inxi: 3.1.03

Benchmark #28179 - Brand: Samsung 840 EVO