Benchmark #28221 - pibenchmarks.com

Brand: SanDisk SD Extreme Pro A1 (SP32G)
A1 C10 V30 U3
#65 / 1,701
312
#1,171 / 1,701
#77 / 405
1,616
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-28 03:10:44
#28,221
1,572
-44 (-2.80%)
Anonymous

Secure Digital (SD) Card Details
SanDisk SD Extreme Pro A1 (SP32G)
A1 C10 V30 U3
29.5G
SD
SanDisk
SP32G
SDHC
5.00
0x03
SD
8.0
02/2020
Class 10
A1
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Ubuntu 18.04.4 LTS
aarch64

Benchmark Results
33.3 MB/s
42.15 MB/s
41.24 MB/s
1,335 IOPS
3,576 IOPS
5,341 KB/s
14,304 KB/s
10,515 KB/s
2,749 KB/s
10,737 KB/s
3,957 KB/s

inxi Results
System: Kernel: 4.19.105-v8-28 aarch64 bits: 64 compiler: gcc v: 9.2.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:640x480M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_compat_alsa=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 fsck.repair=yes fsck.mode=auto root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait Console: tty 1 Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.78 GiB used: 256.5 MiB (6.6%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 130x76 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.105-v8-28 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v4: type: secondary dynamic scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 29.72 GiB used: 12.58 GiB (42.3%) ID-1: /dev/mmcblk0 vendor: Samsung model: SP32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.96 GiB (98.25%) used: 12.54 GiB (43.3%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: writable uuid: b96d647f-679e-4582-87d0-2d8c7afc91f4 ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 40.7 MiB (16.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: system-boot uuid: 85F3-CC2B Swap: Alert: No Swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe 4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse 11: deb http: //ports.ubuntu.com/ubuntu-ports bionic-proposed restricted main multiverse universe Active apt repos in: /etc/apt/sources.list.d/nextcloud-devs-ubuntu-client-bionic.list 1: deb http: //ppa.launchpad.net/nextcloud-devs/client/ubuntu bionic main Active apt repos in: /etc/apt/sources.list.d/oibaf-ubuntu-graphics-drivers-bionic.list 1: deb http: //ppa.launchpad.net/oibaf/graphics-drivers/ubuntu bionic main Processes: CPU top: 5 of 139 1: cpu: 1.1% command: init pid: 1 mem: 8.10 MiB (0.2%) 2: cpu: 0.5% command: [kworker/0:1h-mm] pid: 106 mem: 0.00 MiB (0.0%) 3: cpu: 0.5% command: sshd: pid: 2755 mem: 4.94 MiB (0.1%) 4: cpu: 0.4% command: systemd-journald pid: 161 mem: 13.0 MiB (0.3%) 5: cpu: 0.3% command: [kworker/1:1h-kb] pid: 119 mem: 0.00 MiB (0.0%) Memory top: 5 of 139 1: mem: 18.8 MiB (0.4%) command: smbd pid: 639 cpu: 0.0% 2: mem: 18.8 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 542 cpu: 0.0% 3: mem: 15.9 MiB (0.4%) command: networkd-dispatcher started by: python3 pid: 529 cpu: 0.1% 4: mem: 13.0 MiB (0.3%) command: systemd-journald pid: 161 cpu: 0.4% 5: mem: 10.6 MiB (0.2%) command: nmbd pid: 561 cpu: 0.0% Info: Processes: 139 Uptime: 5m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.5.0 alt: 7 Client: shell wrapper v: 4.4.20-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.105-v8-28 aarch64 bits: 64 compiler: gcc v: 9.2.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:640x480M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 
           snd_bcm2835.enable_compat_alsa=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           fsck.repair=yes fsck.mode=auto root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline 
           rootwait 
           Console: tty 1 Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.78 GiB used: 256.5 MiB (6.6%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 130x76 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.105-v8-28 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v4:  type: secondary dynamic scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: 29.72 GiB used: 12.58 GiB (42.3%) 
           ID-1: /dev/mmcblk0 vendor: Samsung model: SP32G size: 29.72 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.47 GiB size: 28.96 GiB (98.25%) used: 12.54 GiB (43.3%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: writable 
           uuid: b96d647f-679e-4582-87d0-2d8c7afc91f4 
           ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 40.7 MiB (16.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
           label: system-boot uuid: 85F3-CC2B 
Swap:      Alert: No Swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse
           11: deb http: //ports.ubuntu.com/ubuntu-ports bionic-proposed restricted main multiverse universe
           Active apt repos in: /etc/apt/sources.list.d/nextcloud-devs-ubuntu-client-bionic.list 
           1: deb http: //ppa.launchpad.net/nextcloud-devs/client/ubuntu bionic main
           Active apt repos in: /etc/apt/sources.list.d/oibaf-ubuntu-graphics-drivers-bionic.list 
           1: deb http: //ppa.launchpad.net/oibaf/graphics-drivers/ubuntu bionic main
Processes: CPU top: 5 of 139 
           1: cpu: 1.1% command: init pid: 1 mem: 8.10 MiB (0.2%) 
           2: cpu: 0.5% command: [kworker/0:1h-mm] pid: 106 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.5% command: sshd: pid: 2755 mem: 4.94 MiB (0.1%) 
           4: cpu: 0.4% command: systemd-journald pid: 161 mem: 13.0 MiB (0.3%) 
           5: cpu: 0.3% command: [kworker/1:1h-kb] pid: 119 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 139 
           1: mem: 18.8 MiB (0.4%) command: smbd pid: 639 cpu: 0.0% 
           2: mem: 18.8 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 
           pid: 542 cpu: 0.0% 
           3: mem: 15.9 MiB (0.4%) command: networkd-dispatcher started by: python3 pid: 529 
           cpu: 0.1% 
           4: mem: 13.0 MiB (0.3%) command: systemd-journald pid: 161 cpu: 0.4% 
           5: mem: 10.6 MiB (0.2%) command: nmbd pid: 561 cpu: 0.0% 
Info:      Processes: 139 Uptime: 5m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.5.0 alt: 7 
           Client: shell wrapper v: 4.4.20-release inxi: 3.1.03

Benchmark #28221 - Brand: SanDisk SD Extreme Pro A1 (SP32G)