Benchmark #28231 - pibenchmarks.com

Brand: SanDisk SD Ultra (SL32G)
C10
#73 / 1,701
282
#1,504 / 1,701
#311 / 405
800
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-28 06:23:40
#28,231
437
-363 (-83.07%)
Ernst Test 1
Ernst Pi2

Secure Digital (SD) Card Details
SanDisk SD Ultra (SL32G)
C10
27.3G
SD
SanDisk
SL32G
SDHC
3.00
0x03
PT
3.0
10/2015
Class 10
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 2B 1.1
Raspberry Pi 2 Model B Rev 1.1
Raspberry Pi Foundation
900
250
450 (+50)
50

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
10 MB/s
21.13 MB/s
20.92 MB/s
99 IOPS
1,778 IOPS
399 KB/s
7,114 KB/s
4,943 KB/s
256 KB/s
4,446 KB/s
244 KB/s

inxi Results
System: Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M bcm2708_fb.fbwidth=1440 bcm2708_fb.fbheight=900 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait splash plymouth.ignore-serial-consoles quiet Desktop: LXDE 0.9.3 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.18.3 Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a01041 Memory: RAM: total: 1002.1 MiB used: 367.7 MiB (36.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 5 microcode: N/A bogomips: 230 Speed: 900 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 900 2: 900 3: 900 4: 900 Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.19.2 driver: fbturbo display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 381x238mm (15.0x9.4") s-diag: 449mm (17.7") Monitor-1: default res: 1440x900 OpenGL: renderer: Gallium 0.4 on llvmpipe (LLVM 3.9 128 bits) v: 3.3 Mesa 13.0.6 compat-v: 3.0 direct render: Yes Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 28.97 GiB used: 9.24 GiB (31.9%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 28.97 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 27.29 GiB size: 26.73 GiB (97.97%) used: 9.22 GiB (34.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 label: root uuid: f7ced285-b709-4f14-9be9-9737780bf9be ID-2: /boot raw size: 69.0 MiB size: 67.9 MiB (98.44%) used: 22.3 MiB (32.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 041E-C1D5 ID-3: /media/pi/SETTINGS raw size: 32.0 MiB size: 30.0 MiB (93.69%) used: 398 KiB (1.3%) fs: ext4 block size: 1024 B dev: /dev/mmcblk0p5 label: SETTINGS uuid: c445b1ca-eef3-48e4-86b2-b826b8eaebdf Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 1.58 GiB fs: vfat label: RECOVERY uuid: F505-2383 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.4:4 info: Microchip CDC RS-232 Emulation Demo type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 04d8:000a Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/mono-official-stable.list 1: deb https: //download.mono-project.com/repo/debian stable-raspbianstretch main Active apt repos in: /etc/apt/sources.list.d/mono-xamarin.list 1: deb http: //download.mono-project.com/repo/debian wheezy main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 of 142 1: cpu: 28.4% command: xastir pid: 733 mem: 35.1 MiB (3.7%) 2: cpu: 27.2% command: xorg pid: 414 mem: 63.6 MiB (6.8%) 3: cpu: 12.5% command: dv_serial pid: 772 mem: 64.5 MiB (6.9%) 4: cpu: 5.6% command: mono pid: 756 mem: 98.0 MiB (10.5%) 5: cpu: 0.5% command: sed pid: 5723 mem: 0.62 MiB (0.0%) Memory top: 5 of 142 1: mem: 98.0 MiB (10.5%) command: mono pid: 756 cpu: 5.6% 2: mem: 64.5 MiB (6.9%) command: dv_serial pid: 772 cpu: 12.5% 3: mem: 63.6 MiB (6.8%) command: xorg pid: 414 cpu: 27.2% 4: mem: 35.1 MiB (3.7%) command: xastir pid: 733 cpu: 28.4% 5: mem: 27.3 MiB (2.9%) command: lxpanel pid: 577 cpu: 0.3% Info: Processes: 142 Uptime: 1d 2h 18m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M bcm2708_fb.fbwidth=1440 bcm2708_fb.fbheight=900 
           bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 
           dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p7 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait splash 
           plymouth.ignore-serial-consoles quiet 
           Desktop: LXDE 0.9.3 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.18.3 
           Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a01041 
           Memory:    RAM: total: 1002.1 MiB used: 367.7 MiB (36.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 5 microcode: N/A bogomips: 230 
           Speed: 900 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 900 2: 900 3: 900 4: 900 
           Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 
           vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.19.2 driver: fbturbo display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 381x238mm (15.0x9.4") 
           s-diag: 449mm (17.7") 
           Monitor-1: default res: 1440x900 
           OpenGL: renderer: Gallium 0.4 on llvmpipe (LLVM 3.9 128 bits) v: 3.3 Mesa 13.0.6 
           compat-v: 3.0 direct render: Yes 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.66-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 28.97 GiB used: 9.24 GiB (31.9%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 28.97 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 27.29 GiB size: 26.73 GiB (97.97%) used: 9.22 GiB (34.5%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p7 label: root 
           uuid: f7ced285-b709-4f14-9be9-9737780bf9be 
           ID-2: /boot raw size: 69.0 MiB size: 67.9 MiB (98.44%) used: 22.3 MiB (32.9%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 041E-C1D5 
           ID-3: /media/pi/SETTINGS raw size: 32.0 MiB size: 30.0 MiB (93.69%) 
           used: 398 KiB (1.3%) fs: ext4 block size: 1024 B dev: /dev/mmcblk0p5 label: SETTINGS 
           uuid: c445b1ca-eef3-48e4-86b2-b826b8eaebdf 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 1.58 GiB fs: vfat label: RECOVERY uuid: F505-2383 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.4:4 info: Microchip CDC RS-232 Emulation Demo 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s 
           chip ID: 04d8:000a 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/mono-official-stable.list 
           1: deb https: //download.mono-project.com/repo/debian stable-raspbianstretch main
           Active apt repos in: /etc/apt/sources.list.d/mono-xamarin.list 
           1: deb http: //download.mono-project.com/repo/debian wheezy main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 of 142 
           1: cpu: 28.4% command: xastir pid: 733 mem: 35.1 MiB (3.7%) 
           2: cpu: 27.2% command: xorg pid: 414 mem: 63.6 MiB (6.8%) 
           3: cpu: 12.5% command: dv_serial pid: 772 mem: 64.5 MiB (6.9%) 
           4: cpu: 5.6% command: mono pid: 756 mem: 98.0 MiB (10.5%) 
           5: cpu: 0.5% command: sed pid: 5723 mem: 0.62 MiB (0.0%) 
           Memory top: 5 of 142 
           1: mem: 98.0 MiB (10.5%) command: mono pid: 756 cpu: 5.6% 
           2: mem: 64.5 MiB (6.9%) command: dv_serial pid: 772 cpu: 12.5% 
           3: mem: 63.6 MiB (6.8%) command: xorg pid: 414 cpu: 27.2% 
           4: mem: 35.1 MiB (3.7%) command: xastir pid: 733 cpu: 28.4% 
           5: mem: 27.3 MiB (2.9%) command: lxpanel pid: 577 cpu: 0.3% 
Info:      Processes: 142 Uptime: 1d 2h 18m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 
           alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.1.03

Benchmark #28231 - Brand: SanDisk SD Ultra (SL32G)