Benchmark #28244 - pibenchmarks.com

Brand: HP eMMC (DF406)
MMC (Embedded)
#780 / 1,665
6
#939 / 1,665
#45 / 75
#45 / 92
3,980

Overview
2020-06-28 08:28:18
#28,244
3,964
-16 (-0.40%)
Anonymous
ODroid C2 / 64 GB eMMC

Storage Details
HP eMMC (DF406)
MMC (Embedded)
58.1G
MMC
HP
DF406
Embedded
None

System Board Details
		Amazon.com AliExpress
ODROID C2
ODROID-C2
Hardkernel
1,536

Operating System

Debian GNU/Linux 9 (stretch)
aarch64

Benchmark Results
88.8 MB/s
103.89 MB/s
102.09 MB/s
5,140 IOPS
3,209 IOPS
20,562 KB/s
12,838 KB/s
26,088 KB/s
19,221 KB/s
10,108 KB/s
15,636 KB/s

inxi Results
System: Kernel: 3.16.57+ aarch64 bits: 64 compiler: gcc v: 6.3.0 parameters: root=/dev/mmcblk0p2 rootwait ro console=tty0 no_console_suspend hdmimode=1080p60hz m_bpp=32 vout= fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=true Console: tty 0 Distro: Debian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: ODROID-C2 rev: 020c Memory: RAM: total: 1.69 GiB used: 628.4 MiB (36.4%) RAM Report: message: No RAM data was found. PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a53 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 Speed: 1536 MHz min/max: 100/1536 MHz Core speeds (MHz): 1: 1536 2: 1536 3: 1536 4: 1536 Features: asimd crc32 fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: amhdmitx driver: amhdmitx v: N/A bus ID: N/A chip ID: amlogic:amhdmitx Device-2: mali-450 driver: mali_utgard v: N/A bus ID: N/A chip ID: arm:d00c0000 Device-3: meson-fb driver: meson_fb v: N/A bus ID: N/A chip ID: amlogic:meson-fb Display: server: X.org 1.19.2 driver: fbturbo Message: Advanced graphics data unavailable for root. Audio: Device-1: amhdmitx driver: amhdmitx bus ID: N/A chip ID: amlogic:amhdmitx Device-2: odroid_dac driver: N/A bus ID: N/A chip ID: sound_card:odroid_dac Device-3: odroid_dac2 driver: N/A bus ID: N/A chip ID: sound_card:odroid_dac2 Device-4: odroid_hdmi driver: odroid_hdmi_snd bus ID: N/A chip ID: sound_card:odroid_hdmi Sound Server: ALSA v: k3.16.57+ Network: Device-1: gxbb-rgmii-dwmac driver: stmmaceth v: N/A port: N/A bus ID: N/A chip ID: amlogic:c9410000 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global WAN IP: Drives: Local Storage: total: 7.33 TiB used: 7.13 TiB (97.2%) ID-1: /dev/mmcblk0 model: DF4064 size: 58.24 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Western Digital model: WD Elements 25A3 size: 7.28 TiB block size: physical: 4096 B logical: 512 B rev: 1021 scheme: GPT SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 58.12 GiB size: 57.20 GiB (98.43%) used: 18.16 GiB (31.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: e139ce78-9841-40fe-8823-96a304a09859 ID-2: /boot raw size: 128.0 MiB size: 127.7 MiB (99.79%) used: 46.5 MiB (36.4%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 0966-01D4 ID-3: /mnt/8TB raw size: 7.28 TiB size: 7.22 TiB (99.20%) used: 7.11 TiB (98.5%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: 8TB_USB3.0 uuid: 53011b15-c18d-45d3-8b6e-11fe1ee6d5b8 Swap: Kernel: swappiness: 1 (default 60) cache pressure: 100 (default) ID-1: swap-1 type: file size: 2.00 GiB used: 23.3 MiB (1.1%) priority: -1 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0610 Device-1: 1-1.4:4 info: Western Digital Elements Desktop (WDBWLG) type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 1058:25a3 Hub: 2-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb https: //deb.debian.org/debian/ stretch main contrib non-free 2: deb https: //deb.debian.org/debian/ stretch-updates main contrib non-free 3: deb https: //deb.debian.org/debian-security/ stretch/updates main contrib non-free 4: deb https: //deb.debian.org/debian/ stretch-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/meveric-all-C2.list 1: deb http: //fuzon.co.uk/meveric all c2 Active apt repos in: /etc/apt/sources.list.d/meveric-all-main.list 1: deb http: //fuzon.co.uk/meveric all main Active apt repos in: /etc/apt/sources.list.d/meveric-all-testing.list 1: deb http: //fuzon.co.uk/meveric all testing Active apt repos in: /etc/apt/sources.list.d/meveric-stretch-backports.list 1: deb http: //fuzon.co.uk/meveric stretch backports Active apt repos in: /etc/apt/sources.list.d/meveric-stretch-main.list 1: deb http: //fuzon.co.uk/meveric stretch main Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 1: deb https: //downloads.plex.tv/repo/deb public main Processes: CPU top: 5 of 134 1: cpu: 3.4% command: gkrellm pid: 30412 mem: 17.2 MiB (0.9%) 2: cpu: 1.4% command: openvpn pid: 389 mem: 0.95 MiB (0.0%) 3: cpu: 1.1% command: plex pid: 703 mem: 50.1 MiB (2.9%) 4: cpu: 1.1% command: qbittorrent-nox pid: 908 mem: 196.0 MiB (11.3%) 5: cpu: 0.6% command: plex pid: 642 mem: 63.2 MiB (3.6%) Memory top: 5 of 134 1: mem: 196.0 MiB (11.3%) command: qbittorrent-nox pid: 908 cpu: 1.1% 2: mem: 63.2 MiB (3.6%) command: plex pid: 642 cpu: 0.6% 3: mem: 50.1 MiB (2.9%) command: plex pid: 703 cpu: 1.1% 4: mem: 41.4 MiB (2.3%) command: plex pid: 1101 cpu: 0.3% 5: mem: 38.2 MiB (2.2%) command: plex pid: 869 cpu: 0.3% Info: Processes: 134 Uptime: 23d 21h 43m Init: systemd v: 232 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 4.4.12-release inxi: 3.1.03

inxi Results

System:    Kernel: 3.16.57+ aarch64 bits: 64 compiler: gcc v: 6.3.0 
           parameters: root=/dev/mmcblk0p2 rootwait ro console=tty0 no_console_suspend 
           hdmimode=1080p60hz m_bpp=32 vout= fsck.repair=yes net.ifnames=0 elevator=noop 
           disablehpd=true 
           Console: tty 0 Distro: Debian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: ODROID-C2 rev: 020c 
Memory:    RAM: total: 1.69 GiB used: 628.4 MiB (36.4%) 
           RAM Report: message: No RAM data was found. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a53 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 
           Speed: 1536 MHz min/max: 100/1536 MHz Core speeds (MHz): 1: 1536 2: 1536 3: 1536 
           4: 1536 
           Features: asimd crc32 fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: amhdmitx driver: amhdmitx v: N/A bus ID: N/A chip ID: amlogic:amhdmitx 
           Device-2: mali-450 driver: mali_utgard v: N/A bus ID: N/A chip ID: arm:d00c0000 
           Device-3: meson-fb driver: meson_fb v: N/A bus ID: N/A chip ID: amlogic:meson-fb 
           Display: server: X.org 1.19.2 driver: fbturbo 
           Message: Advanced graphics data unavailable for root. 
Audio:     Device-1: amhdmitx driver: amhdmitx bus ID: N/A chip ID: amlogic:amhdmitx 
           Device-2: odroid_dac driver: N/A bus ID: N/A chip ID: sound_card:odroid_dac 
           Device-3: odroid_dac2 driver: N/A bus ID: N/A chip ID: sound_card:odroid_dac2 
           Device-4: odroid_hdmi driver: odroid_hdmi_snd bus ID: N/A 
           chip ID: sound_card:odroid_hdmi 
           Sound Server: ALSA v: k3.16.57+ 
Network:   Device-1: gxbb-rgmii-dwmac driver: stmmaceth v: N/A port: N/A bus ID: N/A 
           chip ID: amlogic:c9410000 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global 
           WAN IP:  
Drives:    Local Storage: total: 7.33 TiB used: 7.13 TiB (97.2%) 
           ID-1: /dev/mmcblk0 model: DF4064 size: 58.24 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Western Digital model: WD Elements 25A3 size: 7.28 TiB 
           block size: physical: 4096 B logical: 512 B rev: 1021 scheme: GPT 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 58.12 GiB size: 57.20 GiB (98.43%) used: 18.16 GiB (31.7%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: e139ce78-9841-40fe-8823-96a304a09859 
           ID-2: /boot raw size: 128.0 MiB size: 127.7 MiB (99.79%) used: 46.5 MiB (36.4%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 0966-01D4 
           ID-3: /mnt/8TB raw size: 7.28 TiB size: 7.22 TiB (99.20%) used: 7.11 TiB (98.5%) 
           fs: ext4 block size: 4096 B dev: /dev/sda1 label: 8TB_USB3.0 
           uuid: 53011b15-c18d-45d3-8b6e-11fe1ee6d5b8 
Swap:      Kernel: swappiness: 1 (default 60) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 2.00 GiB used: 23.3 MiB (1.1%) priority: -1 
           file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Device-1: 1-1.4:4 info: Western Digital Elements Desktop (WDBWLG) type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 1058:25a3 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb https: //deb.debian.org/debian/ stretch main contrib non-free
           2: deb https: //deb.debian.org/debian/ stretch-updates main contrib non-free
           3: deb https: //deb.debian.org/debian-security/ stretch/updates main contrib non-free
           4: deb https: //deb.debian.org/debian/ stretch-backports main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/meveric-all-C2.list 
           1: deb http: //fuzon.co.uk/meveric all c2
           Active apt repos in: /etc/apt/sources.list.d/meveric-all-main.list 
           1: deb http: //fuzon.co.uk/meveric all main
           Active apt repos in: /etc/apt/sources.list.d/meveric-all-testing.list 
           1: deb http: //fuzon.co.uk/meveric all testing
           Active apt repos in: /etc/apt/sources.list.d/meveric-stretch-backports.list 
           1: deb http: //fuzon.co.uk/meveric stretch backports
           Active apt repos in: /etc/apt/sources.list.d/meveric-stretch-main.list 
           1: deb http: //fuzon.co.uk/meveric stretch main
           Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           1: deb https: //downloads.plex.tv/repo/deb public main
Processes: CPU top: 5 of 134 
           1: cpu: 3.4% command: gkrellm pid: 30412 mem: 17.2 MiB (0.9%) 
           2: cpu: 1.4% command: openvpn pid: 389 mem: 0.95 MiB (0.0%) 
           3: cpu: 1.1% command: plex pid: 703 mem: 50.1 MiB (2.9%) 
           4: cpu: 1.1% command: qbittorrent-nox pid: 908 mem: 196.0 MiB (11.3%) 
           5: cpu: 0.6% command: plex pid: 642 mem: 63.2 MiB (3.6%) 
           Memory top: 5 of 134 
           1: mem: 196.0 MiB (11.3%) command: qbittorrent-nox pid: 908 cpu: 1.1% 
           2: mem: 63.2 MiB (3.6%) command: plex pid: 642 cpu: 0.6% 
           3: mem: 50.1 MiB (2.9%) command: plex pid: 703 cpu: 1.1% 
           4: mem: 41.4 MiB (2.3%) command: plex pid: 1101 cpu: 0.3% 
           5: mem: 38.2 MiB (2.2%) command: plex pid: 869 cpu: 0.3% 
Info:      Processes: 134 Uptime: 23d 21h 43m Init: systemd v: 232 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 4.4.12-release inxi: 3.1.03

Benchmark #28244 - Brand: HP eMMC (DF406)