Benchmark #28254 - pibenchmarks.com

Brand: SanDisk Extreme Go USB
USB Flash
#163 / 1,665
89
#1,372 / 1,665
#35 / 93
#37 / 89
1,060
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-28 10:38:22
#28,254
1,974
+914 (+46.30%)
Anonymous
SanDisk Extreme Go on Pi 4

Storage Details
SanDisk Extreme Go USB
USB Flash
117.6G
USB Flash
SanDisk
Extreme
3.00
5,000
1d6b:558b
0x1d6b (Linux Foundation)
0x558b
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
116 MB/s
136.55 MB/s
111.52 MB/s
517 IOPS
1,724 IOPS
2,068 KB/s
6,896 KB/s
19,730 KB/s
4,393 KB/s
5,395 KB/s
2,092 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=97709164-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 561.1 MiB (14.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.6x8.0") s-diag: 338mm (13.3") Monitor-1: HDMI-1 res: 1024x768 hz: 60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Device-1: ASIX AX88179 Gigabit Ethernet type: USB driver: ax88179_178a bus ID: 2-2:3 chip ID: 0b95:1790 IF: eth1 state: up speed: 1000 Mbps duplex: full mac: IF-ID-1: br0 state: up speed: N/A duplex: N/A mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IF-ID-3: wg0 state: unknown speed: N/A duplex: N/A mac: N/A IP v4: scope: global IF-ID-4: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 117.88 GiB used: 13.96 GiB (11.8%) ID-1: /dev/sda type: USB vendor: SanDisk model: Extreme size: 117.88 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 117.62 GiB size: 115.28 GiB (98.01%) used: 13.91 GiB (12.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 ID-3: /home//NASCamera raw size: N/A size: 125.99 GiB used: 100.46 GiB (79.7%) fs: cifs remote: //192.168.X.X/camera label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:558b Device-2: 2-2:3 info: ASIX AX88179 Gigabit Ethernet type: Network driver: ax88179_178a interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0b95:1790 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/pivpn-bullseye.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 184 1: cpu: 56.9% command: zmc pid: 1178 mem: 198.3 MiB (5.0%) 2: cpu: 3.0% command: xorg pid: 832 mem: 49.9 MiB (1.2%) 3: cpu: 1.5% command: init pid: 1 mem: 8.03 MiB (0.2%) 4: cpu: 1.2% command: [usb-storage] pid: 87 mem: 0.00 MiB (0.0%) 5: cpu: 0.9% command: vncserver-x11-core pid: 666 mem: 19.6 MiB (0.5%) Memory top: 5 of 184 1: mem: 198.3 MiB (5.0%) command: zmc pid: 1178 cpu: 56.9% 2: mem: 94.0 MiB (2.4%) command: mysqld pid: 805 cpu: 0.5% 3: mem: 71.1 MiB (1.8%) command: prometheus pid: 653 cpu: 0.8% 4: mem: 49.9 MiB (1.2%) command: xorg pid: 832 cpu: 3.0% 5: mem: 47.2 MiB (1.2%) command: lxterminal pid: 1360 cpu: 0.5% Info: Processes: 184 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=97709164-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 561.1 MiB (14.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.6x8.0") 
           s-diag: 338mm (13.3") 
           Monitor-1: HDMI-1 res: 1024x768 hz: 60 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Device-1: ASIX AX88179 Gigabit Ethernet type: USB driver: ax88179_178a bus ID: 2-2:3 
           chip ID: 0b95:1790 IF: eth1 state: up speed: 1000 Mbps duplex: full mac:  
           IF-ID-1: br0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IF-ID-3: wg0 state: unknown speed: N/A duplex: N/A mac: N/A 
           IP v4:  scope: global 
           IF-ID-4: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 117.88 GiB used: 13.96 GiB (11.8%) 
           ID-1: /dev/sda type: USB vendor: SanDisk model: Extreme size: 117.88 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 117.62 GiB size: 115.28 GiB (98.01%) used: 13.91 GiB (12.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 
           ID-3: /home//NASCamera raw size: N/A size: 125.99 GiB used: 100.46 GiB (79.7%) 
           fs: cifs remote: //192.168.X.X/camera label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 0781:558b Device-2: 2-2:3 info: ASIX AX88179 Gigabit Ethernet type: Network driver: ax88179_178a 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0b95:1790 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/pivpn-bullseye.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 184 
           1: cpu: 56.9% command: zmc pid: 1178 mem: 198.3 MiB (5.0%) 
           2: cpu: 3.0% command: xorg pid: 832 mem: 49.9 MiB (1.2%) 
           3: cpu: 1.5% command: init pid: 1 mem: 8.03 MiB (0.2%) 
           4: cpu: 1.2% command: [usb-storage] pid: 87 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.9% command: vncserver-x11-core pid: 666 mem: 19.6 MiB (0.5%) 
           Memory top: 5 of 184 
           1: mem: 198.3 MiB (5.0%) command: zmc pid: 1178 cpu: 56.9% 
           2: mem: 94.0 MiB (2.4%) command: mysqld pid: 805 cpu: 0.5% 
           3: mem: 71.1 MiB (1.8%) command: prometheus pid: 653 cpu: 0.8% 
           4: mem: 49.9 MiB (1.2%) command: xorg pid: 832 cpu: 3.0% 
           5: mem: 47.2 MiB (1.2%) command: lxterminal pid: 1360 cpu: 0.5% 
Info:      Processes: 184 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #28254 - Brand: SanDisk Extreme Go USB