Benchmark #28360 - pibenchmarks.com

Brand: Micro Center USB Flash Drive
USB Flash
#391 / 1,539
18
#1,266 / 1,539
#39 / 90
#39 / 86
1,009
	Amazon.com

Overview
2020-06-30 11:48:35
#28,360
774
-235 (-30.36%)
GAM
Kingston 128 GB SSD on Pi4

Storage Details
Micro Center USB Flash Drive
USB Flash
29G
USB Flash
MicroCenter
USBDISK
3.00
5,000
1d6b:1000
0x1d6b (Linux Foundation)
0x1000 (Mustek BearPaw 1200 Scanner)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
15.7 MB/s
96.64 MB/s
92.5 MB/s
79 IOPS
1,121 IOPS
317 KB/s
4,484 KB/s
19,956 KB/s
15,347 KB/s
4,319 KB/s
427 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:1280x720M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=711d03da-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 468.8 MiB (23.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev tty: 207x61 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 141.09 GiB used: 3.10 GiB (2.2%) ID-1: /dev/sda type: USB model: SMI USB DISK size: 29.30 GiB block size: physical: 512 B logical: 512 B rev: 1100 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-2: /dev/sdb type: USB model: External USB3.0 drive model: SA400S37120G size: 111.79 GiB block size: physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0204 drive rev: SBFK71E0 temp: 33 C scheme: MBR SMART: yes state: enabled health: PASSED on: 48d 23h cycles: 53 read: 7.00 GiB written: 45.00 GiB Old-Age: media wearout: 100 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.04 GiB size: 28.46 GiB (98.00%) used: 3.05 GiB (10.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 70A2-8001 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sdb1 size: 256.0 MiB fs: vfat label: boot uuid: 70A2-8001 ID-2: /dev/sdb2 size: 111.54 GiB fs: ext4 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:4 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Device-2: 2-2:2 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 090c:1000 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1326 lib: 665 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 164 1: cpu: 4.0% command: chromium-browser-v7 pid: 1386 mem: 152.0 MiB (7.8%) 2: cpu: 1.1% command: xorg pid: 507 mem: 49.4 MiB (2.5%) 3: cpu: 1.1% command: chromium-browser-v7 pid: 1064 mem: 77.4 MiB (3.9%) 4: cpu: 0.9% command: vncserver-x11-core pid: 459 mem: 14.6 MiB (0.7%) 5: cpu: 0.8% command: chromium-browser-v7 pid: 1019 mem: 138.0 MiB (7.1%) Memory top: 5 of 164 1: mem: 152.0 MiB (7.8%) command: chromium-browser-v7 pid: 1386 cpu: 4.0% 2: mem: 138.0 MiB (7.1%) command: chromium-browser-v7 pid: 1019 cpu: 0.8% 3: mem: 95.5 MiB (4.9%) command: chromium-browser-v7 pid: 1209 cpu: 0.2% 4: mem: 77.4 MiB (3.9%) command: chromium-browser-v7 pid: 1064 cpu: 1.1% 5: mem: 49.7 MiB (2.5%) command: chromium-browser-v7 pid: 1067 cpu: 0.1% Info: Processes: 164 Uptime: 1h 43m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.04

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           video=HDMI-A-1:1280x720M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=711d03da-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 468.8 MiB (23.3%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           tty: 207x61 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 141.09 GiB used: 3.10 GiB (2.2%) 
           ID-1: /dev/sda type: USB model: SMI USB DISK size: 29.30 GiB block size: 
           physical: 512 B logical: 512 B rev: 1100 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           ID-2: /dev/sdb type: USB model: External USB3.0 drive model: SA400S37120G 
           size: 111.79 GiB block size: physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s 
           rev: 0204 drive rev: SBFK71E0 temp: 33 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 48d 23h cycles: 53 read: 7.00 GiB 
           written: 45.00 GiB Old-Age: media wearout: 100 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.04 GiB size: 28.46 GiB (98.00%) used: 3.05 GiB (10.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 70A2-8001 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/sdb1 size: 256.0 MiB fs: vfat label: boot uuid: 70A2-8001 
           ID-2: /dev/sdb2 size: 111.54 GiB fs: ext4 label: rootfs 
           uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:4 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Device-2: 2-2:2 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 090c:1000 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 1326 lib: 665 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 164 
           1: cpu: 4.0% command: chromium-browser-v7 pid: 1386 mem: 152.0 MiB (7.8%) 
           2: cpu: 1.1% command: xorg pid: 507 mem: 49.4 MiB (2.5%) 
           3: cpu: 1.1% command: chromium-browser-v7 pid: 1064 mem: 77.4 MiB (3.9%) 
           4: cpu: 0.9% command: vncserver-x11-core pid: 459 mem: 14.6 MiB (0.7%) 
           5: cpu: 0.8% command: chromium-browser-v7 pid: 1019 mem: 138.0 MiB (7.1%) 
           Memory top: 5 of 164 
           1: mem: 152.0 MiB (7.8%) command: chromium-browser-v7 pid: 1386 cpu: 4.0% 
           2: mem: 138.0 MiB (7.1%) command: chromium-browser-v7 pid: 1019 cpu: 0.8% 
           3: mem: 95.5 MiB (4.9%) command: chromium-browser-v7 pid: 1209 cpu: 0.2% 
           4: mem: 77.4 MiB (3.9%) command: chromium-browser-v7 pid: 1064 cpu: 1.1% 
           5: mem: 49.7 MiB (2.5%) command: chromium-browser-v7 pid: 1067 cpu: 0.1% 
Info:      Processes: 164 Uptime: 1h 43m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.04

Benchmark #28360 - Brand: Micro Center USB Flash Drive