Benchmark #28412 - pibenchmarks.com

Brand: Samsung PM871 M.2 Series
SSD (2.5" SATA)
#146 / 1,539
75
#363 / 1,539
#349 / 875
#61 / 363
6,998
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-07-01 10:50:31
#28,412
7,312
+314 (+4.29%)
amoren
not sure

Storage Details
Samsung PM871 M.2 Series
SSD (2.5" SATA)
256G
SSD
Samsung
MZNTY256HDHP-000L2
M.2
SATA
3.00
5,000
152d:0578
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,750 (+250)
500
4 GB
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
198 MB/s
185.87 MB/s
223.53 MB/s
6,930 IOPS
5,844 IOPS
27,722 KB/s
23,378 KB/s
30,880 KB/s
26,700 KB/s
21,689 KB/s
29,146 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:0578:u console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 210.2 MiB (5.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1296 Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::fcc7:e1f2:b8ab:b3b1/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 68.115.X.X Drives: Local Storage: total: 297.95 GiB used: 6.31 GiB (2.1%) ID-1: /dev/mmcblk0 model: SE64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Samsung model: MZNTY256HDHP-000L2 family: based SSDs size: 238.47 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 3102 drive rev: MAT21L1Q temp: 32 C scheme: MBR SMART: yes state: enabled health: PASSED on: 71d 1h cycles: 1822 read: 2.6 MiB written: 2.0 MiB Old-Age: media wearout: 97 threshold: 1 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 238.22 GiB size: 234.45 GiB (98.42%) used: 6.26 GiB (2.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1976 lib: 907 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 136 1: cpu: 4.2% command: init pid: 1 mem: 7.91 MiB (0.2%) 2: cpu: 1.1% command: systemd-journald pid: 113 mem: 7.07 MiB (0.1%) 3: cpu: 1.0% command: udisksd pid: 367 mem: 10.7 MiB (0.2%) 4: cpu: 0.9% command: [usb-storage] pid: 88 mem: 0.00 MiB (0.0%) 5: cpu: 0.6% command: systemd-udevd pid: 152 mem: 3.76 MiB (0.0%) Memory top: 5 of 136 1: mem: 12.6 MiB (0.3%) command: packagekitd pid: 884 cpu: 0.5% 2: mem: 10.7 MiB (0.2%) command: udisksd pid: 367 cpu: 1.0% 3: mem: 10.3 MiB (0.2%) command: vncserver-x11-core pid: 472 cpu: 0.2% 4: mem: 7.91 MiB (0.2%) command: init pid: 1 cpu: 4.2% 5: mem: 7.23 MiB (0.1%) command: systemd pid: 679 cpu: 0.2% Info: Processes: 136 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: StorageBench.sh (sudo) default: Bash v: 5.0.3 inxi: 3.1.04

inxi Results

System:
  Host: raspberrypi Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc 
  v: 4.9.3 
  parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M 
  snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
  snd_bcm2835.enable_headphones=1 cma=256M 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:0578:u 
  console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
  rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
  plymouth.ignore-serial-consoles 
  Console: N/A DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 
  rev: c03111 
Memory:
  RAM: total: 3.89 GiB used: 210.2 MiB (5.3%) gpu: 76.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A 
  bogomips: 1296 
  Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1200 2: 1200 
  3: 1200 4: 1200 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting 
  tty: 80x24 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.19.118-v7l+ 
Network:
  Message: No ARM data found for this feature. 
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global 
  broadcast: 192.168.X.X 
  IP v6: fe80::fcc7:e1f2:b8ab:b3b1/64 scope: link 
  IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
  WAN IP: 68.115.X.X 
Drives:
  Local Storage: total: 297.95 GiB used: 6.31 GiB (2.1%) 
  ID-1: /dev/mmcblk0 model: SE64G size: 59.48 GiB block size: 
  physical: 512 B logical: 512 B scheme: MBR 
  SMART Message: Unknown smartctl error. Unable to get data. 
  ID-2: /dev/sda type: USB vendor: Samsung model: MZNTY256HDHP-000L2 
  family: based SSDs size: 238.47 GiB block size: physical: 512 B 
  logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 3102 
  drive rev: MAT21L1Q temp: 32 C scheme: MBR 
  SMART: yes state: enabled health: PASSED on: 71d 1h cycles: 1822 
  read: 2.6 MiB written: 2.0 MiB Old-Age: media wearout: 97 threshold: 1 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 238.22 GiB size: 234.45 GiB (98.42%) 
  used: 6.26 GiB (2.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 
  label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
  ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
  used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
  label: boot uuid: 9969-E3D2 
Swap:
  Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
  ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 
  file: /var/swap 
Unmounted:
  ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs 
  uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
  ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 9969-E3D2 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
  chip ID: 2109:3431 
  Device-1: 1-1.3:3 info: Logitech Unifying Receiver 
  type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 
  rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 
  Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge 
  type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 
  speed: 5 Gb/s chip ID: 152d:0578 
Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Packages: apt: 1976 lib: 907 
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ buster main
Processes:
  CPU top: 5 of 136 
  1: cpu: 4.2% command: init pid: 1 mem: 7.91 MiB (0.2%) 
  2: cpu: 1.1% command: systemd-journald pid: 113 mem: 7.07 MiB (0.1%) 
  3: cpu: 1.0% command: udisksd pid: 367 mem: 10.7 MiB (0.2%) 
  4: cpu: 0.9% command: [usb-storage] pid: 88 mem: 0.00 MiB (0.0%) 
  5: cpu: 0.6% command: systemd-udevd pid: 152 mem: 3.76 MiB (0.0%) 
  Memory top: 5 of 136 
  1: mem: 12.6 MiB (0.3%) command: packagekitd pid: 884 cpu: 0.5% 
  2: mem: 10.7 MiB (0.2%) command: udisksd pid: 367 cpu: 1.0% 
  3: mem: 10.3 MiB (0.2%) command: vncserver-x11-core pid: 472 cpu: 0.2% 
  4: mem: 7.91 MiB (0.2%) command: init pid: 1 cpu: 4.2% 
  5: mem: 7.23 MiB (0.1%) command: systemd pid: 679 cpu: 0.2% 
Info:
  Processes: 136 Uptime: 1m Init: systemd v: 241 runlevel: 5 
  target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
  Shell: StorageBench.sh (sudo) default: Bash v: 5.0.3 inxi: 3.1.04

Benchmark #28412 - Brand: Samsung PM871 M.2 Series