Benchmark #28461 - pibenchmarks.com

Brand: SanDisk SD Ultra (SL16G)
C10
#58 / 1,701
333
#1,505 / 1,701
#63 / 405
796
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-07-02 13:58:10
#28,461
847
+51 (+6.02%)
Anonymous
sandisk

Secure Digital (SD) Card Details
SanDisk SD Ultra (SL16G)
C10
14.8G
SD
SanDisk
SL16G
SDHC
3.00
0x03
SD
8.0
05/2017
Class 10
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450
50

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
6.3 MB/s
22.2 MB/s
22.3 MB/s
574 IOPS
2,113 IOPS
2,298 KB/s
8,455 KB/s
7,350 KB/s
2,917 KB/s
6,054 KB/s
2,990 KB/s

inxi Results
System: Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=256M vc_mem.mem_base=0x3e200000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait consoleblank=0 quiet plymouth.enable=0 Console: tty 0 Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 992.1 MiB used: 645.1 MiB (65.0%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.2 driver: fbturbo tty: 126x41 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IF-ID-1: br0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: up mac: WAN IP: Drives: Local Storage: total: 14.84 GiB used: 5.98 GiB (40.3%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.79 GiB size: 14.50 GiB (98.02%) used: 5.95 GiB (41.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 31688870-9e02-4182-8cda-25195c5a4739 ID-2: /boot raw size: 43.1 MiB size: 42.4 MiB (98.43%) used: 22.3 MiB (52.6%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: D332-A79C Swap: Kernel: swappiness: 10 (default 60) cache pressure: 100 (default) ID-1: swap-1 type: file size: 512.0 MiB used: 15.2 MiB (3.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1879 lib: 982 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/pipplware.list 1: deb http: //pipplware.pplware.pt/pipplware/dists/stretch/main/binary/ ./ Active apt repos in: /etc/apt/sources.list.d/pipplware_stretch.list 1: deb http: //pipplware.pplware.pt/pipplware/dists/stretch/main/binary / Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 of 130 1: cpu: 75.9% command: java pid: 413 mem: 376.9 MiB (43.6%) 2: cpu: 0.3% command: init pid: 1 mem: 2.07 MiB (0.2%) 3: cpu: 0.2% command: sshd: pid: 1707 mem: 1.25 MiB (0.1%) 4: cpu: 0.2% command: -bash pid: 1727 mem: 1.60 MiB (0.1%) 5: cpu: 0.2% command: [kworker/0:0-eve] pid: 2419 mem: 0.00 MiB (0.0%) Memory top: 5 of 130 1: mem: 376.9 MiB (43.6%) command: java pid: 413 cpu: 75.9% 2: mem: 54.2 MiB (6.2%) command: mysqld pid: 733 cpu: 0.1% 3: mem: 3.90 MiB (0.4%) command: packagekitd pid: 2009 cpu: 0.1% 4: mem: 2.55 MiB (0.2%) command: nmbd pid: 749 cpu: 0.0% 5: mem: 2.49 MiB (0.2%) command: ps pid: 3152 cpu: 0.0% Info: Processes: 130 Uptime: 22m Init: systemd v: 232 runlevel: 3 target: multi-user.target Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.1.04

inxi Results

System:    Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=256M vc_mem.mem_base=0x3e200000 
           vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           consoleblank=0 quiet plymouth.enable=0 
           Console: tty 0 Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 992.1 MiB used: 645.1 MiB (65.0%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.19.2 driver: fbturbo tty: 126x41 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.66-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IF-ID-1: br0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           WAN IP:  
Drives:    Local Storage: total: 14.84 GiB used: 5.98 GiB (40.3%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.79 GiB size: 14.50 GiB (98.02%) used: 5.95 GiB (41.1%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 31688870-9e02-4182-8cda-25195c5a4739 
           ID-2: /boot raw size: 43.1 MiB size: 42.4 MiB (98.43%) used: 22.3 MiB (52.6%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: D332-A79C 
Swap:      Kernel: swappiness: 10 (default 60) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 512.0 MiB used: 15.2 MiB (3.0%) priority: -2 
           file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 1879 lib: 982 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/pipplware.list 
           1: deb http: //pipplware.pplware.pt/pipplware/dists/stretch/main/binary/ ./
           Active apt repos in: /etc/apt/sources.list.d/pipplware_stretch.list 
           1: deb http: //pipplware.pplware.pt/pipplware/dists/stretch/main/binary /
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 of 130 
           1: cpu: 75.9% command: java pid: 413 mem: 376.9 MiB (43.6%) 
           2: cpu: 0.3% command: init pid: 1 mem: 2.07 MiB (0.2%) 
           3: cpu: 0.2% command: sshd: pid: 1707 mem: 1.25 MiB (0.1%) 
           4: cpu: 0.2% command: -bash pid: 1727 mem: 1.60 MiB (0.1%) 
           5: cpu: 0.2% command: [kworker/0:0-eve] pid: 2419 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 130 
           1: mem: 376.9 MiB (43.6%) command: java pid: 413 cpu: 75.9% 
           2: mem: 54.2 MiB (6.2%) command: mysqld pid: 733 cpu: 0.1% 
           3: mem: 3.90 MiB (0.4%) command: packagekitd pid: 2009 cpu: 0.1% 
           4: mem: 2.55 MiB (0.2%) command: nmbd pid: 749 cpu: 0.0% 
           5: mem: 2.49 MiB (0.2%) command: ps pid: 3152 cpu: 0.0% 
Info:      Processes: 130 Uptime: 22m Init: systemd v: 232 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.1.04

Benchmark #28461 - Brand: SanDisk SD Ultra (SL16G)