Benchmark #40153 - pibenchmarks.com

Brand: Lexar USB Flash Drive
USB Flash
#249 / 1,701
67
#1,272 / 1,701
#24 / 94
#25 / 89
1,324
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.pl Amazon.sg

Overview
2021-02-09 00:06:32
#40,153
718
-606 (-84.40%)
Anonymous
Lexar 64GB USB3

Storage Details
Lexar USB Flash Drive
USB Flash
59.4G
USB Flash
Lexar
USBFlashDrive
0xf33d
2.10
480
2109:a83a
0x2109
0xa83a
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
1,750 (+250)
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
15.2 MB/s
33.63 MB/s
33.4 MB/s
169 IOPS
1,235 IOPS
679 KB/s
4,942 KB/s
11,139 KB/s
10,548 KB/s
5,018 KB/s
810 KB/s

inxi Results
System: Host: pi0 Kernel: 5.4.83-v7l+ armv7l bits: 32 compiler: gcc v: 10.2.1 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=543b4694-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: a03111 Memory: RAM: total: 930.5 MiB used: 203.4 MiB (21.9%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1296 Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 4: 1800 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc class ID: fb Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi Display: server: No display server data found. Headless machine? tty: 96x35 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::9de4:3e86:ab67:ff10/64 scope: link IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::b4e2:e89d:c0b:ee3d/64 scope: link WAN IP: 24.188.X.X Bluetooth: Message: No Bluetooth data was found. Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 59.62 GiB used: 2.08 GiB (3.5%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Lexar model: USB Flash Drive size: 59.62 GiB block size: physical: 512 B logical: 512 B rev: 1100 SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. Partition: ID-1: / raw size: 59.37 GiB size: 58.42 GiB (98.40%) used: 2.04 GiB (3.5%) fs: ext4 block size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: b3ce35cd-ade9-4755-a4bb-1571e37fc1b9 ID-2: /boot raw size: 256 MiB size: 252 MiB (98.46%) used: 45.2 MiB (17.9%) fs: vfat block size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: EBBA-157F Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 class ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 class ID: 0900 Device-1: 1-1.3:3 info: Lexar Media type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 05dc:a83a class ID: 0806 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 class ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 534 lib: 266 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 120 1: cpu: 0.7% command: avahi-daemon: pid: 334 mem: 3.54 MiB (0.4%) 2: cpu: 0.4% command: [irq/40-mmc0] pid: 79 mem: 0.00 MiB (0.0%) 3: cpu: 0.4% command: [kworker/3:2+events_freezable] pid: 970 mem: 0.00 MiB (0.0%) 4: cpu: 0.3% command: [kworker/u8:1-events_unbound] pid: 1148 mem: 0.00 MiB (0.0%) 5: cpu: 0.2% command: [kworker/3:1-events] pid: 1097 mem: 0.00 MiB (0.0%) Memory top: 5 of 120 1: mem: 21.2 MiB (2.4%) command: postgres pid: 568 cpu: 0.0% 2: mem: 7.90 MiB (0.9%) command: init pid: 1 cpu: 0.0% 3: mem: 7.84 MiB (0.9%) command: postgres: pid: 572 cpu: 0.0% 4: mem: 6.66 MiB (0.7%) command: systemd pid: 650 cpu: 0.0% 5: mem: 6.46 MiB (0.7%) command: systemd-journald pid: 118 cpu: 0.0% Info: Processes: 120 Uptime: 2h 43m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) default: Bash v: 5.0.3 inxi: 3.3.00

inxi Results

System:    Host: pi0 Kernel: 5.4.83-v7l+ armv7l bits: 32 compiler: gcc v: 10.2.1 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 
           bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=543b4694-02 rootfstype=ext4 elevator=deadline fsck.repair=yes 
           rootwait 
           Console: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 
           rev: a03111 
Memory:    RAM: total: 930.5 MiB used: 203.4 MiB (21.9%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 1296 
           Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 
           4: 1800 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp 
           vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc class ID: fb 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi 
           Display: server: No display server data found. Headless machine? tty: 96x35 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::9de4:3e86:ab67:ff10/64 scope: link 
           IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::b4e2:e89d:c0b:ee3d/64 scope: link 
           WAN IP: 24.188.X.X 
Bluetooth: Message: No Bluetooth data was found. 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 59.62 GiB used: 2.08 GiB (3.5%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Lexar model: USB Flash Drive 
           size: 59.62 GiB block size: physical: 512 B logical: 512 B 
           rev: 1100 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw size: 59.37 GiB size: 58.42 GiB (98.40%) used: 2.04 GiB (3.5%) 
           fs: ext4 block size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: b3ce35cd-ade9-4755-a4bb-1571e37fc1b9 
           ID-2: /boot raw size: 256 MiB size: 252 MiB (98.46%) used: 45.2 MiB (17.9%) 
           fs: vfat block size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot 
           uuid: EBBA-157F 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 
           file: /var/swap 
Unmounted: Message: No Unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 class ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 2109:3431 class ID: 0900 
           Device-1: 1-1.3:3 info: Lexar Media type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 05dc:a83a class ID: 0806            Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 class ID: 0900 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 534 lib: 266 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 120 
           1: cpu: 0.7% command: avahi-daemon: pid: 334 mem: 3.54 MiB (0.4%) 
           2: cpu: 0.4% command: [irq/40-mmc0] pid: 79 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.4% command: [kworker/3:2+events_freezable] pid: 970 
           mem: 0.00 MiB (0.0%) 
           4: cpu: 0.3% command: [kworker/u8:1-events_unbound] pid: 1148 
           mem: 0.00 MiB (0.0%) 
           5: cpu: 0.2% command: [kworker/3:1-events] pid: 1097 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 120 
           1: mem: 21.2 MiB (2.4%) command: postgres pid: 568 cpu: 0.0% 
           2: mem: 7.90 MiB (0.9%) command: init pid: 1 cpu: 0.0% 
           3: mem: 7.84 MiB (0.9%) command: postgres: pid: 572 cpu: 0.0% 
           4: mem: 6.66 MiB (0.7%) command: systemd pid: 650 cpu: 0.0% 
           5: mem: 6.46 MiB (0.7%) command: systemd-journald pid: 118 cpu: 0.0% 
Info:      Processes: 120 Uptime: 2h 43m Init: systemd v: 241 runlevel: 5 Compilers: 
           gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) default: Bash v: 5.0.3 inxi: 3.3.00

Benchmark #40153 - Brand: Lexar USB Flash Drive