Benchmark #40462 - pibenchmarks.com

Brand: Samsung SD EVO (EC2QT)
C10 U3
#26 / 1,539
359
#1,192 / 1,539
#183 / 369
1,144
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-02-15 08:05:30
#40,462
1,093
-51 (-4.67%)
Anonymous
samsung128

Secure Digital (SD) Card Details
Samsung SD EVO (EC2QT)
C10 U3
57G
SD
Samsung
EC2QT
SDXC
3.00
0x1b
SM
3.0
05/2019
Class 10
None
U3
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
25.8 MB/s
41.29 MB/s
40.72 MB/s
218 IOPS
3,424 IOPS
872 KB/s
13,698 KB/s
9,604 KB/s
3,220 KB/s
9,580 KB/s
1,672 KB/s

inxi Results
System: Kernel: 5.10.14-v7l+ armv7l bits: 32 compiler: gcc v: 10.2.1 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Memory: RAM: total: 3.81 GiB used: 453.4 MiB (11.6%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu class ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 507x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio class ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi Sound Server: ALSA v: k5.10.14-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IP v4: scope: global IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Message: No Bluetooth data was found. Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 59.62 GiB used: 8.65 GiB (14.5%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Samsung model: EC2QT size: 59.62 GiB block size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No Optical or Floppy data was found. Partition: ID-1: / raw size: 56.96 GiB size: 55.94 GiB (98.21%) used: 8.6 GiB (15.4%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 maj-min: 179:7 label: root uuid: cdf83cf3-a91d-4ce1-9076-b437f9601119 ID-2: /boot raw size: 256 MiB size: 252 MiB (98.46%) used: 48.7 MiB (19.3%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 maj-min: 179:6 label: boot uuid: 0820-0E2E Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 2.38 GiB fs: vfat label: RECOVERY uuid: 11EB-105E ID-2: /dev/mmcblk0p2 maj-min: 179:2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 maj-min: 179:5 size: 32 MiB fs: ext4 label: SETTINGS uuid: 0ce7c5e0-6c97-40db-b793-3cae3b49fc3c USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 class ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 class ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 class ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2058 lib: 932 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/vscode.list 1: deb [arch=amd64,arm64,armhf] http: //packages.microsoft.com/repos/code stable main Processes: CPU top: 5 of 171 1: cpu: 4.0% command: init pid: 1 mem: 8.20 MiB (0.2%) 2: cpu: 2.5% command: xorg pid: 530 mem: 70.7 MiB (1.8%) 3: cpu: 2.0% command: vncserver-x11-core pid: 494 mem: 30.8 MiB (0.8%) 4: cpu: 2.0% command: lxterminal pid: 999 mem: 47.7 MiB (1.2%) 5: cpu: 0.9% command: lxpanel pid: 647 mem: 31.6 MiB (0.8%) Memory top: 5 of 171 1: mem: 70.7 MiB (1.8%) command: xorg pid: 530 cpu: 2.5% 2: mem: 47.7 MiB (1.2%) command: lxterminal pid: 999 cpu: 2.0% 3: mem: 31.6 MiB (0.8%) command: lxpanel pid: 647 cpu: 0.9% 4: mem: 30.8 MiB (0.8%) command: vncserver-x11-core pid: 494 cpu: 2.0% 5: mem: 28.8 MiB (0.7%) command: applet.py started by: python3 pid: 670 cpu: 0.6% Info: Processes: 171 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.01

inxi Results

System:    Kernel: 5.10.14-v7l+ armv7l bits: 32 compiler: gcc v: 10.2.1 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 
           Memory:    RAM: total: 3.81 GiB used: 453.4 MiB (11.6%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu 
           class ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting 
           unloaded: fbdev display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 507x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio 
           class ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi 
           Sound Server: ALSA v: k5.10.14-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IP v4:  scope: global 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Message: No Bluetooth data was found. 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 59.62 GiB used: 8.65 GiB (14.5%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Samsung model: EC2QT size: 59.62 GiB 
           block size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw size: 56.96 GiB size: 55.94 GiB (98.21%) used: 8.6 GiB (15.4%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p7 maj-min: 179:7 label: root 
           uuid: cdf83cf3-a91d-4ce1-9076-b437f9601119 
           ID-2: /boot raw size: 256 MiB size: 252 MiB (98.46%) used: 48.7 MiB (19.3%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p6 maj-min: 179:6 label: boot uuid: 0820-0E2E 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 2.38 GiB fs: vfat label: RECOVERY 
           uuid: 11EB-105E 
           ID-2: /dev/mmcblk0p2 maj-min: 179:2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 maj-min: 179:5 size: 32 MiB fs: ext4 label: SETTINGS 
           uuid: 0ce7c5e0-6c97-40db-b793-3cae3b49fc3c 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 class ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           class ID: 0900 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 class ID: 0900 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 2058 lib: 932 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/vscode.list 
           1: deb [arch=amd64,arm64,armhf] http: //packages.microsoft.com/repos/code stable main
Processes: CPU top: 5 of 171 
           1: cpu: 4.0% command: init pid: 1 mem: 8.20 MiB (0.2%) 
           2: cpu: 2.5% command: xorg pid: 530 mem: 70.7 MiB (1.8%) 
           3: cpu: 2.0% command: vncserver-x11-core pid: 494 mem: 30.8 MiB (0.8%) 
           4: cpu: 2.0% command: lxterminal pid: 999 mem: 47.7 MiB (1.2%) 
           5: cpu: 0.9% command: lxpanel pid: 647 mem: 31.6 MiB (0.8%) 
           Memory top: 5 of 171 
           1: mem: 70.7 MiB (1.8%) command: xorg pid: 530 cpu: 2.5% 
           2: mem: 47.7 MiB (1.2%) command: lxterminal pid: 999 cpu: 2.0% 
           3: mem: 31.6 MiB (0.8%) command: lxpanel pid: 647 cpu: 0.9% 
           4: mem: 30.8 MiB (0.8%) command: vncserver-x11-core pid: 494 cpu: 2.0% 
           5: mem: 28.8 MiB (0.7%) command: applet.py started by: python3 pid: 670 cpu: 0.6% 
Info:      Processes: 171 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.01

Benchmark #40462 - Brand: Samsung SD EVO (EC2QT)