Benchmark #42167 - pibenchmarks.com

Brand: SanDisk U100
SSD (2.5" SATA)
#378 / 1,700
33
#1,100 / 1,700
#961 / 989
#350 / 370
2,069
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.de Amazon.fr Amazon.it

Overview
2021-03-16 22:17:36
#42,167
1,301
-768 (-59.03%)
Anonymous
SD class 6 4GB for Boot and 32GB Sandisk Extreme USB Flash

Storage Details
SanDisk U100
SSD (2.5" SATA)
32G
SSD
SanDisk
SSDU10032GB
1.8 inch
SATA
2.00
480
0424:5580
0x0424 (Microchip Technology, Inc. (formerly SMSC))
0x5580 (SDCZ80 Flash Drive)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 2B 1.1
Raspberry Pi 2 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
1,000 (+100)
500 (+250)
500 (+100)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
19.7 MB/s
26.77 MB/s
26.9 MB/s
1,297 IOPS
1,687 IOPS
5,190 KB/s
6,749 KB/s
9,860 KB/s
6,510 KB/s
5,850 KB/s
5,117 KB/s

inxi Results
System: Kernel: 5.4.83-v7+ armv7l bits: 32 compiler: gcc v: 8.4.0 parameters: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=267ed1fc-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty not a tty Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a01041 Memory: RAM: total: 990.4 MiB used: 127.9 MiB (12.9%) gpu: 16 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 5 bogomips: 256 Speed: 1000 MHz min/max: 600/1000 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.4.83-v7+ running: yes Network: Device-1: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: mmcnr IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Bluetooth: Message: No Bluetooth data was found. Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 33.58 GiB used: 1.33 GiB (4.0%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: USD size: 3.76 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Extreme drive model: SSD U100 32GB family: based SSDs size: 29.82 GiB block-size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rotation: SSD rev: 0001 drive rev: KM.10.00 scheme: MBR SMART: yes state: enabled health: PASSED on: 89 hrs cycles: 8689 read: 162.22 GiB written: 374.34 GiB Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 29.56 GiB size: 29.07 GiB (98.34%) used: 1.29 GiB (4.4%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: a7adb26a-8b87-4729-99c8-9f5ac069d51e ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 45.2 MiB (17.9%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: DC3E-E470 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 3.76 GiB fs: vfat label: N/A uuid: 5626-03B1 USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:9514 class-ID: 0900 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:ec00 class-ID: ff00 Device-2: 1-1.3:5 info: SanDisk SDCZ80 Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA chip-ID: 0781:5580 class-ID: 0806 Device-3: 1-1.5:4 info: Lenovo type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 17ef:602d class-ID: 0300 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 503 lib: 250 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 117 1: cpu: 3.7% command: init pid: 1 mem: 7.96 MiB (0.8%) 2: cpu: 1.1% command: [kworker/2:4-mm_percpu_wq] pid: 1010 mem: 0.00 MiB (0.0%) 3: cpu: 0.7% command: smartd pid: 1028 mem: 3.18 MiB (0.3%) 4: cpu: 0.5% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 5: cpu: 0.4% command: [kworker/3:1-events] pid: 63 mem: 0.00 MiB (0.0%) Memory top: 5 of 117 1: mem: 7.96 MiB (0.8%) command: init pid: 1 cpu: 3.7% 2: mem: 6.38 MiB (0.6%) command: systemd pid: 472 cpu: 0.0% 3: mem: 6.15 MiB (0.6%) command: systemd-journald pid: 121 cpu: 0.3% 4: mem: 5.70 MiB (0.5%) command: systemd-logind pid: 294 cpu: 0.1% 5: mem: 5.46 MiB (0.5%) command: systemd-timesyncd pid: 231 cpu: 0.2% Info: Processes: 117 Uptime: 5m Init: systemd v: 241 runlevel: 3 target: multi-user.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: Bash (sudo) v: 5.0.3 inxi: 3.3.02

inxi Results

System:    Kernel: 5.4.83-v7+ armv7l bits: 32 compiler: gcc v: 8.4.0 
           parameters: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbdepth=16 
           bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 
           console=ttyAMA0,115200 console=tty1 root=PARTUUID=267ed1fc-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait 
           Console: tty not a tty Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a01041 
           Memory:    RAM: total: 990.4 MiB used: 127.9 MiB (12.9%) gpu: 16 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 5 bogomips: 256 
           Speed: 1000 MHz min/max: 600/1000 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 
           4: 1000 
           Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 
           vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc 
           class-ID: fb 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: No display server data found. Headless machine? tty: N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.4.83-v7+ running: yes 
Network:   Device-1: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc 
           class-ID: mmcnr 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Message: No Bluetooth data was found. 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 33.58 GiB used: 1.33 GiB (4.0%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 model: USD size: 3.76 GiB block-size: physical: 512 B 
           logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Extreme 
           drive model: SSD U100 32GB family: based SSDs size: 29.82 GiB block-size: 
           physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rotation: SSD rev: 0001 drive rev: KM.10.00 scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 89 hrs cycles: 8689 read: 162.22 GiB 
           written: 374.34 GiB 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 29.56 GiB size: 29.07 GiB (98.34%) used: 1.29 GiB (4.4%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: a7adb26a-8b87-4729-99c8-9f5ac069d51e 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 45.2 MiB (17.9%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: DC3E-E470 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 3.76 GiB fs: vfat label: N/A uuid: 5626-03B1 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           power: 2mA chip-ID: 0424:9514 class-ID: 0900 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA 
           chip-ID: 0424:ec00 class-ID: ff00 
           Device-2: 1-1.3:5 info: SanDisk SDCZ80 Flash Drive type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA 
           chip-ID: 0781:5580 class-ID: 0806 Device-3: 1-1.5:4 info: Lenovo type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 17ef:602d class-ID: 0300 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 503 lib: 250 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 117 
           1: cpu: 3.7% command: init pid: 1 mem: 7.96 MiB (0.8%) 
           2: cpu: 1.1% command: [kworker/2:4-mm_percpu_wq] pid: 1010 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.7% command: smartd pid: 1028 mem: 3.18 MiB (0.3%) 
           4: cpu: 0.5% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.4% command: [kworker/3:1-events] pid: 63 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 117 
           1: mem: 7.96 MiB (0.8%) command: init pid: 1 cpu: 3.7% 
           2: mem: 6.38 MiB (0.6%) command: systemd pid: 472 cpu: 0.0% 
           3: mem: 6.15 MiB (0.6%) command: systemd-journald pid: 121 cpu: 0.3% 
           4: mem: 5.70 MiB (0.5%) command: systemd-logind pid: 294 cpu: 0.1% 
           5: mem: 5.46 MiB (0.5%) command: systemd-timesyncd pid: 231 cpu: 0.2% 
Info:      Processes: 117 Uptime: 5m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: Bash (sudo) v: 5.0.3 inxi: 3.3.02

Benchmark #42167 - Brand: SanDisk U100