Benchmark #42364 - pibenchmarks.com

Brand: Generic SSD
SSD (Portable)
#5 / 1,539
930
#441 / 1,539
#423 / 875
#75 / 137
6,557
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-03-19 22:15:10
#42,364
7,716
+1,159 (+15.02%)
giannis b
integal portable ssd 120gb

Storage Details
Generic SSD
SSD (Portable)
120G
SSD
Generic
GenericSSD
less than 1.8 inch
SATA
3.00
5,000
1d6b:9917
0x1d6b (Linux Foundation)
0x9917 (Fusion Flash Drive)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,900 (+400)
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
221 MB/s
288.55 MB/s
252.35 MB/s
9,651 IOPS
22,831 IOPS
38,605 KB/s
91,326 KB/s
25,314 KB/s
21,511 KB/s
17,674 KB/s
23,995 KB/s

inxi Results
System: Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1680x1050M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=af964169-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Memory: RAM: total: 3.82 GiB used: 998.9 MiB (25.6%) gpu: 500 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1368 Speed: 1900 MHz min/max: 600/1900 MHz Core speeds (MHz): 1: 1900 2: 1900 3: 1900 4: 1900 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1680x1050 s-dpi: 96 s-size: 444x277mm (17.5x10.9") s-diag: 523mm (20.6") Monitor-1: HDMI-1 res: 1680x1050 hz: 60 dpi: 90 size: 474x296mm (18.7x11.7") diag: 559mm (22") OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-4: C-Media CM108 Audio Controller type: USB driver: hid-generic,snd-usb-audio,usbhid bus-ID: 1-1.2.4:8 chip-ID: 0d8c:013c class-ID: 0300 Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes Sound Server-2: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: ID: hci0 state: down bt-service: enabled, running address: Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 2.84 TiB used: 1.84 TiB (65.0%) ID-1: /dev/sda maj-min: 8:0 type: USB model: SATA SSD size: 111.79 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Western Digital model: WD30EFRX-68EUZN0 family: Red size: 2.73 TiB block-size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rotation: 5400 rpm rev: 82.00A82 temp: 37 C scheme: GPT SMART: yes state: enabled health: PASSED on: 3y 340d 11h cycles: 164 Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 111.54 GiB size: 109.28 GiB (97.98%) used: 23.21 GiB (21.2%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 163660a6-ad17-44fc-99c5-5c75e78ad815 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: F4F1-BC2C ID-3: /media/RedNas raw-size: 2.73 TiB size: 2.73 TiB (100.00%) used: 1.82 TiB (66.7%) fs: ntfs block-size: 4096 B dev: /dev/sdb2 maj-min: 8:18 label: RED NAS uuid: A60A1B710A1B3E2D Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sdb1 maj-min: 8:17 size: 128 MiB fs: N/A label: N/A uuid: N/A USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.2:3 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 0bda:5411 class-ID: 0900 Hub-4: 1-1.2.1:5 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 0bda:5411 class-ID: 0900 Device-1: 1-1.2.X.X:7 info: GreenAsia MaxFire Blaze2 type: HID driver: pantherlord,usbhid interfaces: 1 rev: 1.0 speed: 12 Mb/s power: 100mA chip-ID: 0e8f:0003 class-ID: 0300 Device-2: 1-1.2.2:6 info: Microsoft Comfort Mouse 4500 type: Mouse driver: microsoft,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 045e:076c class-ID: 0301 Device-3: 1-1.2.4:8 info: C-Media CM108 Audio Controller type: Audio,HID driver: hid-generic,snd-usb-audio,usbhid interfaces: 4 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 0d8c:013c class-ID: 0300 Device-4: 1-1.4:4 info: Microsoft Comfort Curve Keyboard 3000 type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 045e:0780 class-ID: 0300 Hub-5: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: N/A type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 26bd:9917 class-ID: 0806 Hub-6: 2-2:3 info: Realtek ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 0bda:0411 class-ID: 0900 Hub-7: 2-2.1:4 info: Realtek ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 0bda:0411 class-ID: 0900 Device-1: 2-2.3:5 info: ASMedia ASM1053 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:5136 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: 2066 apt: 2063 lib: 1185 flatpak: 3 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 1: deb https: //linux.teamviewer.com/deb stable main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 182 1: cpu: 7.8% command: embyserver pid: 539 mem: 129.6 MiB (3.8%) 2: cpu: 6.4% command: xorg pid: 600 mem: 58.5 MiB (1.7%) 3: cpu: 4.0% command: teamviewerd pid: 558 mem: 13.6 MiB (0.3%) 4: cpu: 2.1% command: lxterminal pid: 2213 mem: 28.5 MiB (0.8%) 5: cpu: 2.0% command: lxpanel pid: 744 mem: 32.8 MiB (0.9%) Memory top: 5 of 182 1: mem: 129.6 MiB (3.8%) command: embyserver pid: 539 cpu: 7.8% 2: mem: 77.5 MiB (2.2%) command: teamviewer pid: 822 cpu: 0.7% 3: mem: 58.5 MiB (1.7%) command: xorg pid: 600 cpu: 6.4% 4: mem: 43.1 MiB (1.2%) command: kwalletd5 pid: 903 cpu: 0.3% 5: mem: 32.8 MiB (0.9%) command: lxpanel pid: 744 cpu: 2.0% Info: Processes: 182 Uptime: 4m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

System:    Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1680x1050M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=af964169-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 
           Memory:    RAM: total: 3.82 GiB used: 998.9 MiB (25.6%) gpu: 500 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 1368 
           Speed: 1900 MHz min/max: 600/1900 MHz Core speeds (MHz): 1: 1900 2: 1900 3: 1900 
           4: 1900 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting 
           unloaded: fbdev display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1680x1050 s-dpi: 96 s-size: 444x277mm (17.5x10.9") 
           s-diag: 523mm (20.6") 
           Monitor-1: HDMI-1 res: 1680x1050 hz: 60 dpi: 90 size: 474x296mm (18.7x11.7") 
           diag: 559mm (22") 
           OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-4: C-Media CM108 Audio Controller type: USB 
           driver: hid-generic,snd-usb-audio,usbhid bus-ID: 1-1.2.4:8 chip-ID: 0d8c:013c 
           class-ID: 0300 
           Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes 
           Sound Server-2: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: down mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: ID: hci0 state: down bt-service: enabled, running address:  
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 2.84 TiB used: 1.84 TiB (65.0%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB model: SATA SSD size: 111.79 GiB block-size: 
           physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Western Digital model: WD30EFRX-68EUZN0 
           family: Red size: 2.73 TiB block-size: physical: 4096 B logical: 512 B sata: 3.0 
           speed: 6.0 Gb/s rotation: 5400 rpm rev: 82.00A82 temp: 37 C 
           scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 3y 340d 11h cycles: 164 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 111.54 GiB size: 109.28 GiB (97.98%) used: 23.21 GiB (21.2%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: 163660a6-ad17-44fc-99c5-5c75e78ad815 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: F4F1-BC2C 
           ID-3: /media/RedNas raw-size: 2.73 TiB size: 2.73 TiB (100.00%) used: 1.82 TiB (66.7%) 
           fs: ntfs block-size: 4096 B dev: /dev/sdb2 maj-min: 8:18 label: RED NAS 
           uuid: A60A1B710A1B3E2D 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/sdb1 maj-min: 8:17 size: 128 MiB fs: N/A label: N/A uuid: N/A 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 1-1.2:3 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 0bda:5411 
           class-ID: 0900 
           Hub-4: 1-1.2.1:5 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 0bda:5411 
           class-ID: 0900 
           Device-1: 1-1.2.X.X:7 info: GreenAsia MaxFire Blaze2 type: HID 
           driver: pantherlord,usbhid interfaces: 1 rev: 1.0 speed: 12 Mb/s power: 100mA 
           chip-ID: 0e8f:0003 class-ID: 0300 
           Device-2: 1-1.2.2:6 info: Microsoft Comfort Mouse 4500 type: Mouse 
           driver: microsoft,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA 
           chip-ID: 045e:076c class-ID: 0301 
           Device-3: 1-1.2.4:8 info: C-Media CM108 Audio Controller type: Audio,HID 
           driver: hid-generic,snd-usb-audio,usbhid interfaces: 4 rev: 1.1 speed: 12 Mb/s 
           power: 100mA chip-ID: 0d8c:013c class-ID: 0300 
           Device-4: 1-1.4:4 info: Microsoft Comfort Curve Keyboard 3000 type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA 
           chip-ID: 045e:0780 class-ID: 0300 
           Hub-5: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-1:2 info: N/A type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s power: 896mA chip-ID: 26bd:9917 class-ID: 0806 Hub-6: 2-2:3 info: Realtek ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 0bda:0411 
           class-ID: 0900 
           Hub-7: 2-2.1:4 info: Realtek ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 0bda:0411 
           class-ID: 0900 
           Device-1: 2-2.3:5 info: ASMedia ASM1053 SATA 3Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:5136 
           class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: 2066 apt: 2063 lib: 1185 flatpak: 3 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 
           1: deb https: //linux.teamviewer.com/deb stable main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 182 
           1: cpu: 7.8% command: embyserver pid: 539 mem: 129.6 MiB (3.8%) 
           2: cpu: 6.4% command: xorg pid: 600 mem: 58.5 MiB (1.7%) 
           3: cpu: 4.0% command: teamviewerd pid: 558 mem: 13.6 MiB (0.3%) 
           4: cpu: 2.1% command: lxterminal pid: 2213 mem: 28.5 MiB (0.8%) 
           5: cpu: 2.0% command: lxpanel pid: 744 mem: 32.8 MiB (0.9%) 
           Memory top: 5 of 182 
           1: mem: 129.6 MiB (3.8%) command: embyserver pid: 539 cpu: 7.8% 
           2: mem: 77.5 MiB (2.2%) command: teamviewer pid: 822 cpu: 0.7% 
           3: mem: 58.5 MiB (1.7%) command: xorg pid: 600 cpu: 6.4% 
           4: mem: 43.1 MiB (1.2%) command: kwalletd5 pid: 903 cpu: 0.3% 
           5: mem: 32.8 MiB (0.9%) command: lxpanel pid: 744 cpu: 2.0% 
Info:      Processes: 182 Uptime: 4m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.03

Benchmark #42364 - Brand: Generic SSD