Benchmark #42400 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#2 / 1,672
1,592
#464 / 1,672
#449 / 983
#64 / 370
7,190
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-03-20 15:58:18
#42,400
6,700
-490 (-7.31%)
Sproessling
SANDISK SSD PLUS 240GB @ Startech / TRIM enabled

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
240G
SSD
SanDisk
SSDPLUS240GB
2.5 inch
SATA
3.00
5,000
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
2,000 (+500)
700 (+200)
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
209 MB/s
286.06 MB/s
234.59 MB/s
9,836 IOPS
17,716 IOPS
39,346 KB/s
70,865 KB/s
15,084 KB/s
18,483 KB/s
10,945 KB/s
20,942 KB/s

inxi Results
System: Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=ba9b0639-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Battery: Device-1: hidpp_battery_0 model: Logitech Wireless Illuminated Keyboard K800 charge: Low status: Discharging Memory: RAM: total: 3.81 GiB used: 566.7 MiB (14.5%) gpu: 256 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 432 Speed: 2000 MHz max: 2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 4: 2000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: modesetting unloaded: fbdev tty: 240x67 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes Sound Server-2: PulseAudio v: 12.2 running: no Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: ID: hci0 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 223.57 GiB used: 4.29 GiB (1.9%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: SSD PLUS 240GB size: 223.57 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rotation: SSD rev: UF4304RL temp: 43 C scheme: MBR SMART: yes state: enabled health: PASSED on: 3 hrs cycles: 13 read: 2 KiB written: 1 KiB Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 223.32 GiB size: 218.81 GiB (97.98%) used: 4.25 GiB (1.9%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 163660a6-ad17-44fc-99c5-5c75e78ad815 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: F4F1-BC2C Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.1:3 info: Maxxter type: Mouse,Keyboard driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 50mA chip-ID: 248a:8367 class-ID: 0301 Device-2: 1-1.3:4 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 98mA chip-ID: 046d:c52b class-ID: 0300 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Sensors: System Temperatures: cpu: 36.5 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: apt: 1474 lib: 716 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/picockpit.list 1: deb http: //repository.picockpit.com/raspbian buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 152 1: cpu: 2.1% command: picockpit-client started by: python pid: 499 mem: 22.9 MiB (0.6%) 2: cpu: 1.2% command: init pid: 1 mem: 8.20 MiB (0.2%) 3: cpu: 1.1% command: packagekitd pid: 1270 mem: 13.3 MiB (0.3%) 4: cpu: 0.4% command: bash pid: 1073 mem: 2.88 MiB (0.0%) 5: cpu: 0.3% command: mysqld pid: 653 mem: 63.6 MiB (1.7%) Memory top: 5 of 152 1: mem: 63.6 MiB (1.7%) command: mysqld pid: 653 cpu: 0.3% 2: mem: 26.4 MiB (0.7%) command: apache2 pid: 663 cpu: 0.0% 3: mem: 24.0 MiB (0.6%) command: php-fpm: pid: 512 cpu: 0.2% 4: mem: 23.7 MiB (0.6%) command: php-cgi pid: 650 cpu: 0.0% 5: mem: 22.9 MiB (0.6%) command: picockpit-client started by: python pid: 499 cpu: 2.1% Info: Processes: 152 Uptime: 2m Init: systemd v: 241 runlevel: 3 target: multi-user.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

System:    Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=ba9b0639-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 1 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 
           Battery:   Device-1: hidpp_battery_0 model: Logitech Wireless Illuminated Keyboard K800 
           charge: Low status: Discharging 
Memory:    RAM: total: 3.81 GiB used: 566.7 MiB (14.5%) gpu: 256 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 432 
           Speed: 2000 MHz max: 2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 4: 2000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.org 1.20.4 driver: loaded: modesetting unloaded: fbdev tty: 240x67 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes 
           Sound Server-2: PulseAudio v: 12.2 running: no 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: ID: hci0 state: up address:  bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 
           hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 223.57 GiB used: 4.29 GiB (1.9%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: SSD PLUS 240GB 
           size: 223.57 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s 
           rotation: SSD rev: UF4304RL temp: 43 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 3 hrs cycles: 13 read: 2 KiB 
           written: 1 KiB 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 223.32 GiB size: 218.81 GiB (97.98%) used: 4.25 GiB (1.9%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: 163660a6-ad17-44fc-99c5-5c75e78ad815 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: F4F1-BC2C 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No Unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.1:3 info: Maxxter type: Mouse,Keyboard driver: hid-generic,usbhid 
           interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 50mA chip-ID: 248a:8367 class-ID: 0301 
           Device-2: 1-1.3:4 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 98mA 
           chip-ID: 046d:c52b class-ID: 0300 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa 
           class-ID: 0806 Sensors:   System Temperatures: cpu: 36.5 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     Packages: apt: 1474 lib: 716 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/picockpit.list 
           1: deb http: //repository.picockpit.com/raspbian buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 152 
           1: cpu: 2.1% command: picockpit-client started by: python pid: 499 mem: 22.9 MiB (0.6%) 
           2: cpu: 1.2% command: init pid: 1 mem: 8.20 MiB (0.2%) 
           3: cpu: 1.1% command: packagekitd pid: 1270 mem: 13.3 MiB (0.3%) 
           4: cpu: 0.4% command: bash pid: 1073 mem: 2.88 MiB (0.0%) 
           5: cpu: 0.3% command: mysqld pid: 653 mem: 63.6 MiB (1.7%) 
           Memory top: 5 of 152 
           1: mem: 63.6 MiB (1.7%) command: mysqld pid: 653 cpu: 0.3% 
           2: mem: 26.4 MiB (0.7%) command: apache2 pid: 663 cpu: 0.0% 
           3: mem: 24.0 MiB (0.6%) command: php-fpm: pid: 512 cpu: 0.2% 
           4: mem: 23.7 MiB (0.6%) command: php-cgi pid: 650 cpu: 0.0% 
           5: mem: 22.9 MiB (0.6%) command: picockpit-client started by: python pid: 499 cpu: 2.1% 
Info:      Processes: 152 Uptime: 2m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.03

Benchmark #42400 - Brand: SanDisk SSD Plus