Benchmark #42426 - pibenchmarks.com

Brand: SanDisk SD Extreme A2 (SN128)
A2 C10 V30 U3
#39 / 1,679
436
#1,154 / 1,679
#68 / 394
1,599
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-03-20 22:13:14
#42,426
1,318
-281 (-21.32%)
rct
SanDisk Switch SD 128GB on RPI 4 32 bit

Secure Digital (SD) Card Details
SanDisk SD Extreme A2 (SN128)
A2 C10 V30 U3
118.9G
SD
SanDisk
SN128
SDXC
6.00
0x03
SD
8.0
07/2020
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
4 GB
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
35.9 MB/s
40.74 MB/s
34.3 MB/s
995 IOPS
2,990 IOPS
3,983 KB/s
11,960 KB/s
8,533 KB/s
2,154 KB/s
7,157 KB/s
3,482 KB/s

inxi Results
System: Host: raspberrypi Kernel: 5.4.83-v7l+ armv7l bits: 32 compiler: gcc v: 8.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=2d86304b-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Memory: RAM: total: 3.81 GiB used: 285.9 MiB (7.3%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 84x61 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.4.83-v7l+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fd49:a0c0:72da:0:2897:5ce8:42d:db2f/64 type: mngtmpaddr noprefixroute scope: global IP v6: fe80::6:5187:c4ef:fac3/64 scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 69.119.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: ID: hci0 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 153 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 119.08 GiB used: 1.33 GiB (1.1%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: SN128 size: 119.08 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 118.83 GiB size: 116.96 GiB (98.42%) used: 1.29 GiB (1.1%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: a7adb26a-8b87-4729-99c8-9f5ac069d51e ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 45.9 MiB (18.2%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: DC3E-E470 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 503 lib: 250 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 133 1: cpu: 1.1% command: init pid: 1 mem: 8.09 MiB (0.2%) 2: cpu: 0.5% command: [kworker/u8:4-events_unbound] pid: 930 mem: 0.00 MiB (0.0%) 3: cpu: 0.2% command: [kworker/3:1h-kblockd] pid: 82 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: [kswapd0] pid: 60 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: [kworker/0:2h-mmc_complete] pid: 110 mem: 0.00 MiB (0.0%) Memory top: 5 of 133 1: mem: 8.09 MiB (0.2%) command: init pid: 1 cpu: 1.1% 2: mem: 7.70 MiB (0.2%) command: systemd-journald pid: 111 cpu: 0.1% 3: mem: 6.54 MiB (0.1%) command: systemd pid: 885 cpu: 0.0% 4: mem: 6.15 MiB (0.1%) command: sshd: pid: 882 cpu: 0.0% 5: mem: 5.73 MiB (0.1%) command: systemd-logind pid: 337 cpu: 0.0% Info: Processes: 133 Uptime: 10m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Shell: Bash v: 5.0.3 running-in: tty pts/0 (SSH) inxi: 3.3.03

inxi Results

System:
  Host: raspberrypi Kernel: 5.4.83-v7l+ armv7l bits: 32 compiler: gcc v: 8.4.0 
  parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
  snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
  vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 
  console=tty1 root=PARTUUID=2d86304b-02 rootfstype=ext4 elevator=deadline 
  fsck.repair=yes rootwait 
  Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 
  rev: c03112 
Memory:
  RAM: total: 3.81 GiB used: 285.9 MiB (7.3%) gpu: 76 MiB 
  RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP 
  arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1080 
  Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 
  3: 1500 4: 1500 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp 
  vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
  class-ID: gpu 
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc 
  class-ID: hdmi 
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc 
  class-ID: hdmi 
  Display: server: No display server data found. Headless machine? tty: 84x61 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A 
  chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio 
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc 
  class-ID: hdmi 
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc 
  class-ID: hdmi 
  Sound Server-1: ALSA v: k5.4.83-v7l+ running: yes 
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
  chip-ID: brcm:fe300000 class-ID: mmcnr 
  IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global 
  broadcast: 192.168.X.X 
  IP v6: fd49:a0c0:72da:0:2897:5ce8:42d:db2f/64 type: mngtmpaddr noprefixroute 
  scope: global 
  IP v6: fe80::6:5187:c4ef:fac3/64 scope: link 
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
  chip-ID: brcm:fd580000 class-ID: ethernet 
  IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX 
  WAN IP: 69.119.X.X 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 
  class-ID: serial 
  Report: ID: hci0 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0 lmp-v: 5.0 
  sub-v: 6119 hci-v: 5.0 rev: 153 
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff 
  link-mode: slave accept 
Logical:
  Message: No LVM data was found. 
RAID:
  Message: No RAID data was found. 
Drives:
  Local Storage: total: 119.08 GiB used: 1.33 GiB (1.1%) 
  ID-1: /dev/mmcblk0 maj-min: 179:0 model: SN128 size: 119.08 GiB block-size: 
  physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
  SMART Message: Unknown smartctl error. Unable to generate data. 
  Message: No Optical or Floppy data was found. 
Partition:
  ID-1: / raw-size: 118.83 GiB size: 116.96 GiB (98.42%) used: 1.29 GiB (1.1%) 
  fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs 
  uuid: a7adb26a-8b87-4729-99c8-9f5ac069d51e 
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 45.9 MiB (18.2%) 
  fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot 
  uuid: DC3E-E470 
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 
  file: /var/swap 
Unmounted:
  Message: No Unmounted partitions found. 
USB:
  Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
  chip-ID: 1d6b:0002 class-ID: 0900 
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
  chip-ID: 2109:3431 class-ID: 0900 
  Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Packages: apt: 503 lib: 250 
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ buster main
Processes:
  CPU top: 5 of 133 
  1: cpu: 1.1% command: init pid: 1 mem: 8.09 MiB (0.2%) 
  2: cpu: 0.5% command: [kworker/u8:4-events_unbound] pid: 930 
  mem: 0.00 MiB (0.0%) 
  3: cpu: 0.2% command: [kworker/3:1h-kblockd] pid: 82 mem: 0.00 MiB (0.0%) 
  4: cpu: 0.1% command: [kswapd0] pid: 60 mem: 0.00 MiB (0.0%) 
  5: cpu: 0.1% command: [kworker/0:2h-mmc_complete] pid: 110 
  mem: 0.00 MiB (0.0%) 
  Memory top: 5 of 133 
  1: mem: 8.09 MiB (0.2%) command: init pid: 1 cpu: 1.1% 
  2: mem: 7.70 MiB (0.2%) command: systemd-journald pid: 111 cpu: 0.1% 
  3: mem: 6.54 MiB (0.1%) command: systemd pid: 885 cpu: 0.0% 
  4: mem: 6.15 MiB (0.1%) command: sshd: pid: 882 cpu: 0.0% 
  5: mem: 5.73 MiB (0.1%) command: systemd-logind pid: 337 cpu: 0.0% 
Info:
  Processes: 133 Uptime: 10m Init: systemd v: 241 runlevel: 5 tool: systemctl 
  Compilers: gcc: 8.3.0 alt: 8 Shell: Bash v: 5.0.3 running-in: tty pts/0 (SSH) 
  inxi: 3.3.03

Benchmark #42426 - Brand: SanDisk SD Extreme A2 (SN128)