Benchmark #42516 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SL16G)
A1 C10 U1
#49 / 1,539
221
#1,201 / 1,539
#190 / 369
1,129
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-03-22 10:46:34
#42,516
1,087
-42 (-3.86%)
pimaniac
edge

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SL16G)
A1 C10 U1
12.2G
SD
SanDisk
SL16G
SDHC
5.00
0x03
SD
8.0
03/2020
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
13.1 MB/s
38.14 MB/s
39.23 MB/s
893 IOPS
2,576 IOPS
3,574 KB/s
10,305 KB/s
8,838 KB/s
4,272 KB/s
6,319 KB/s
3,784 KB/s

inxi Results
System: Kernel: 5.10.11-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 Memory: RAM: total: 7.76 GiB used: 496.6 MiB (6.2%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org 1.20.4 driver: loaded: modesetting unloaded: fbdev display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 93 size: 527x296mm (20.7x11.7") diag: 604mm (23.8") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.11-v7l+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: ID: hci0 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: capturing, telephony Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 14.84 GiB used: 8.25 GiB (55.6%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SL16G size: 14.84 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 12.18 GiB size: 11.86 GiB (97.40%) used: 8.21 GiB (69.2%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p7 maj-min: 179:7 label: root uuid: d36b9666-974d-43e9-8c25-56cd841c103b ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.5 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p6 maj-min: 179:6 label: boot uuid: 01D4-D763 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 2.37 GiB fs: vfat label: RECOVERY uuid: E025-37D0 ID-2: /dev/mmcblk0p2 maj-min: 179:2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 maj-min: 179:5 size: 32 MiB fs: ext4 label: SETTINGS uuid: 220361fe-ae3d-4229-9719-554c33674a2c USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: China Resource Semico type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 98mA chip-ID: 1a2c:0e24 class-ID: 0300 Device-2: 1-1.4:4 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 093a:2510 class-ID: 0301 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2050 lib: 927 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/sublime-text.list 1: deb https: //download.sublimetext.com/ apt/stable/ Active apt repos in: /etc/apt/sources.list.d/vscode.list 1: deb [arch=amd64,arm64,armhf] http: //packages.microsoft.com/repos/code stable main Processes: CPU top: 5 of 340 1: cpu: 1.5% command: [kworker/0:2h-mmc_complete] pid: 115 mem: 0.00 MiB (0.0%) 2: cpu: 1.1% command: [kworker/2:1h-kblockd] pid: 91 mem: 0.00 MiB (0.0%) 3: cpu: 1.0% command: sed pid: 3143 mem: 0.65 MiB (0.0%) 4: cpu: 0.8% command: xorg pid: 525 mem: 54.8 MiB (0.6%) 5: cpu: 0.7% command: init pid: 1 mem: 7.93 MiB (0.1%) Memory top: 5 of 340 1: mem: 54.8 MiB (0.6%) command: xorg pid: 525 cpu: 0.8% 2: mem: 48.4 MiB (0.6%) command: lxterminal pid: 944 cpu: 0.4% 3: mem: 28.9 MiB (0.3%) command: lxpanel pid: 644 cpu: 0.2% 4: mem: 28.6 MiB (0.3%) command: applet.py started by: python3 pid: 661 cpu: 0.1% 5: mem: 20.0 MiB (0.2%) command: pcmanfm pid: 645 cpu: 0.1% Info: Processes: 340 Uptime: 9m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

System:    Kernel: 5.10.11-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 
           Memory:    RAM: total: 7.76 GiB used: 496.6 MiB (6.2%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.Org 1.20.4 driver: loaded: modesetting unloaded: fbdev 
           display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 93 size: 527x296mm (20.7x11.7") 
           diag: 604mm (23.8") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.11-v7l+ running: yes 
           Sound Server-2: JACK v: 1.9.12 running: no 
           Sound Server-3: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: down mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: ID: hci0 state: up address:  bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 
           hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
           service-classes: capturing, telephony 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 14.84 GiB used: 8.25 GiB (55.6%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SL16G size: 14.84 GiB 
           block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 12.18 GiB size: 11.86 GiB (97.40%) used: 8.21 GiB (69.2%) fs: ext4 
           block-size: 4096 B dev: /dev/mmcblk0p7 maj-min: 179:7 label: root 
           uuid: d36b9666-974d-43e9-8c25-56cd841c103b 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.5 MiB (18.9%) fs: vfat 
           block-size: 512 B dev: /dev/mmcblk0p6 maj-min: 179:6 label: boot uuid: 01D4-D763 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 2.37 GiB fs: vfat label: RECOVERY 
           uuid: E025-37D0 
           ID-2: /dev/mmcblk0p2 maj-min: 179:2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 maj-min: 179:5 size: 32 MiB fs: ext4 label: SETTINGS 
           uuid: 220361fe-ae3d-4229-9719-554c33674a2c 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.3:3 info: China Resource Semico type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 98mA 
           chip-ID: 1a2c:0e24 class-ID: 0300 
           Device-2: 1-1.4:4 info: Pixart Imaging Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA 
           chip-ID: 093a:2510 class-ID: 0301 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 2050 lib: 927 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/sublime-text.list 
           1: deb https: //download.sublimetext.com/ apt/stable/
           Active apt repos in: /etc/apt/sources.list.d/vscode.list 
           1: deb [arch=amd64,arm64,armhf] http: //packages.microsoft.com/repos/code stable main
Processes: CPU top: 5 of 340 
           1: cpu: 1.5% command: [kworker/0:2h-mmc_complete] pid: 115 mem: 0.00 MiB (0.0%) 
           2: cpu: 1.1% command: [kworker/2:1h-kblockd] pid: 91 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.0% command: sed pid: 3143 mem: 0.65 MiB (0.0%) 
           4: cpu: 0.8% command: xorg pid: 525 mem: 54.8 MiB (0.6%) 
           5: cpu: 0.7% command: init pid: 1 mem: 7.93 MiB (0.1%) 
           Memory top: 5 of 340 
           1: mem: 54.8 MiB (0.6%) command: xorg pid: 525 cpu: 0.8% 
           2: mem: 48.4 MiB (0.6%) command: lxterminal pid: 944 cpu: 0.4% 
           3: mem: 28.9 MiB (0.3%) command: lxpanel pid: 644 cpu: 0.2% 
           4: mem: 28.6 MiB (0.3%) command: applet.py started by: python3 pid: 661 cpu: 0.1% 
           5: mem: 20.0 MiB (0.2%) command: pcmanfm pid: 645 cpu: 0.1% 
Info:      Processes: 340 Uptime: 9m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.03

Benchmark #42516 - Brand: SanDisk SD Ultra A1 (SL16G)