Benchmark #42707 - pibenchmarks.com

Brand: SanDisk SD Extreme A2 (SN128)
A2 C10 V30 U3
#39 / 1,679
430
#1,154 / 1,679
#68 / 394
1,601
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-03-25 10:31:53
#42,707
1,295
-306 (-23.63%)
pimaniac

Secure Digital (SD) Card Details
SanDisk SD Extreme A2 (SN128)
A2 C10 V30 U3
118.9G
SD
SanDisk
SN128
SDXC
6.00
0x03
SD
8.0
09/2020
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
ARMv7 v7l
4
2,147 (+647)
750 (+250)
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
35.1 MB/s
39.38 MB/s
40.66 MB/s
842 IOPS
2,972 IOPS
3,371 KB/s
11,889 KB/s
9,201 KB/s
2,121 KB/s
7,306 KB/s
3,287 KB/s

inxi Results
System: Kernel: 5.10.25-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 video=HDMI-A-2:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=b09722fa-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 Memory: RAM: total: 7.77 GiB used: 864 MiB (10.9%) gpu: 144 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1584 Speed: 2200 MHz min/max: 600/2200 MHz Core speeds (MHz): 1: 2200 2: 2200 3: 2200 4: 2200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org 1.20.4 driver: loaded: modesetting unloaded: fbdev display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1016x285mm (40.0x11.2") s-diag: 1055mm (41.5") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 52 size: 930x530mm (36.6x20.9") diag: 1070mm (42.1") Monitor-2: HDMI-2 res: 1920x1080 hz: 60 dpi: 102 size: 477x268mm (18.8x10.6") diag: 547mm (21.5") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.25-v7l+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: ID: hci0 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 351.97 GiB used: 17.19 GiB (4.9%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: SN128 size: 119.08 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 860 EVO M.2 250GB size: 232.89 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rotation: SSD rev: RVT24B6Q temp: 38 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1 hrs cycles: 17 written: 8.01 GiB Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 118.83 GiB size: 116.93 GiB (98.40%) used: 10.59 GiB (9.1%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: b2754152-e8ec-4cc4-8898-42b7cc77dd87 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.8 MiB (19.0%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 2F50-B4D6 ID-3: /media/pi/boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 45.2 MiB (17.9%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 2F50-B4D6 ID-4: /media/pi/rootfs raw-size: 7.76 GiB size: 7.57 GiB (97.62%) used: 6.51 GiB (86.0%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: b2754152-e8ec-4cc4-8898-42b7cc77dd87 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.4:3 info: Dell Multimedia Pro Keyboard Hub ports: 3 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 413c:1005 class-ID: 0900 Device-1: 1-1.4.1:4 info: Dell Multimedia Pro Keyboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 90mA chip-ID: 413c:2011 class-ID: 0300 Device-2: 1-1.4.3:5 info: Logitech DELL Laser Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 98mA chip-ID: 046d:c063 class-ID: 0301 Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2100 lib: 967 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 186 1: cpu: 19.9% command: chromium-browser-v7 pid: 1293 mem: 124.6 MiB (1.5%) 2: cpu: 19.6% command: chromium-browser-v7 pid: 1049 mem: 154.6 MiB (1.9%) 3: cpu: 10.6% command: chromium-browser-v7 pid: 1111 mem: 96.2 MiB (1.2%) 4: cpu: 6.4% command: chromium-browser-v7 pid: 1383 mem: 102.6 MiB (1.3%) 5: cpu: 5.0% command: chromium-browser-v7 pid: 1394 mem: 104.5 MiB (1.3%) Memory top: 5 of 186 1: mem: 154.6 MiB (1.9%) command: chromium-browser-v7 pid: 1049 cpu: 19.6% 2: mem: 124.6 MiB (1.5%) command: chromium-browser-v7 pid: 1293 cpu: 19.9% 3: mem: 104.5 MiB (1.3%) command: chromium-browser-v7 pid: 1394 cpu: 5.0% 4: mem: 102.6 MiB (1.3%) command: chromium-browser-v7 pid: 1383 cpu: 6.4% 5: mem: 102.5 MiB (1.3%) command: chromium-browser-v7 pid: 1206 cpu: 3.6% Info: Processes: 186 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

System:    Kernel: 5.10.25-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 video=HDMI-A-2:1920x1080M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=b09722fa-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 
           Memory:    RAM: total: 7.77 GiB used: 864 MiB (10.9%) gpu: 144 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 1584 
           Speed: 2200 MHz min/max: 600/2200 MHz Core speeds (MHz): 1: 2200 2: 2200 3: 2200 
           4: 2200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.Org 1.20.4 driver: loaded: modesetting unloaded: fbdev 
           display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1016x285mm (40.0x11.2") 
           s-diag: 1055mm (41.5") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 52 size: 930x530mm (36.6x20.9") 
           diag: 1070mm (42.1") 
           Monitor-2: HDMI-2 res: 1920x1080 hz: 60 dpi: 102 size: 477x268mm (18.8x10.6") 
           diag: 547mm (21.5") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.25-v7l+ running: yes 
           Sound Server-2: JACK v: 1.9.12 running: no 
           Sound Server-3: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: ID: hci0 state: up address:  bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 
           hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
           service-classes: rendering, capturing 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 351.97 GiB used: 17.19 GiB (4.9%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 model: SN128 size: 119.08 GiB block-size: 
           physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 860 EVO M.2 250GB 
           size: 232.89 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s 
           rotation: SSD rev: RVT24B6Q temp: 38 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1 hrs cycles: 17 written: 8.01 GiB 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 118.83 GiB size: 116.93 GiB (98.40%) used: 10.59 GiB (9.1%) fs: ext4 
           block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs 
           uuid: b2754152-e8ec-4cc4-8898-42b7cc77dd87 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.8 MiB (19.0%) fs: vfat 
           block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 2F50-B4D6 
           ID-3: /media/pi/boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 45.2 MiB (17.9%) 
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 2F50-B4D6 
           ID-4: /media/pi/rootfs raw-size: 7.76 GiB size: 7.57 GiB (97.62%) 
           used: 6.51 GiB (86.0%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 
           label: rootfs uuid: b2754152-e8ec-4cc4-8898-42b7cc77dd87 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No Unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 1-1.4:3 info: Dell Multimedia Pro Keyboard Hub ports: 3 rev: 1.1 speed: 12 Mb/s 
           power: 100mA chip-ID: 413c:1005 class-ID: 0900 
           Device-1: 1-1.4.1:4 info: Dell Multimedia Pro Keyboard type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 90mA 
           chip-ID: 413c:2011 class-ID: 0300 
           Device-2: 1-1.4.3:5 info: Logitech DELL Laser Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 98mA 
           chip-ID: 046d:c063 class-ID: 0301 
           Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa 
           class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 2100 lib: 967 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 186 
           1: cpu: 19.9% command: chromium-browser-v7 pid: 1293 mem: 124.6 MiB (1.5%) 
           2: cpu: 19.6% command: chromium-browser-v7 pid: 1049 mem: 154.6 MiB (1.9%) 
           3: cpu: 10.6% command: chromium-browser-v7 pid: 1111 mem: 96.2 MiB (1.2%) 
           4: cpu: 6.4% command: chromium-browser-v7 pid: 1383 mem: 102.6 MiB (1.3%) 
           5: cpu: 5.0% command: chromium-browser-v7 pid: 1394 mem: 104.5 MiB (1.3%) 
           Memory top: 5 of 186 
           1: mem: 154.6 MiB (1.9%) command: chromium-browser-v7 pid: 1049 cpu: 19.6% 
           2: mem: 124.6 MiB (1.5%) command: chromium-browser-v7 pid: 1293 cpu: 19.9% 
           3: mem: 104.5 MiB (1.3%) command: chromium-browser-v7 pid: 1394 cpu: 5.0% 
           4: mem: 102.6 MiB (1.3%) command: chromium-browser-v7 pid: 1383 cpu: 6.4% 
           5: mem: 102.5 MiB (1.3%) command: chromium-browser-v7 pid: 1206 cpu: 3.6% 
Info:      Processes: 186 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.03

Benchmark #42707 - Brand: SanDisk SD Extreme A2 (SN128)