Benchmark #42856 - pibenchmarks.com

Brand: SanDisk SD Extreme Pro A1 (SM32G)
A1 C10 V30 U3
#25 / 1,539
361
#1,197 / 1,539
#187 / 369
1,135
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-03-27 10:44:46
#42,856
1,110
-25 (-2.25%)
Nilo
Sandisk Extreme on Pi 3

Secure Digital (SD) Card Details
SanDisk SD Extreme Pro A1 (SM32G)
A1 C10 V30 U3
29.5G
SD
SanDisk
SM32G
SDHC
6.00
0x03
SD
8.0
01/2021
Class 10
A1
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,200
400
450
100 (+50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
24.7 MB/s
37.9 MB/s
34.96 MB/s
889 IOPS
2,488 IOPS
3,558 KB/s
9,952 KB/s
8,192 KB/s
2,166 KB/s
6,447 KB/s
3,153 KB/s

inxi Results
System: Kernel: 5.10.17-v7+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=e4796465-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 989.8 MiB used: 130.9 MiB (13.2%) gpu: 16 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 130x40 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial Report: ID: hci0 state: up address: bt-v: 2.1 lmp-v: 4.1 sub-v: 2209 hci-v: 4.1 rev: 1fc Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 29.72 GiB used: 1.37 GiB (4.6%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Silicon Motion model: SM32G size: 29.72 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 29.47 GiB size: 28.98 GiB (98.34%) used: 1.33 GiB (4.6%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: fa37d505-e741-4d35-bcec-4580aef395e1 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 7581-8A48 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:9514 class-ID: 0900 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:ec00 class-ID: ff00 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 505 lib: 250 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 116 1: cpu: 8.5% command: init pid: 1 mem: 8.04 MiB (0.8%) 2: cpu: 2.2% command: [kworker/2:1-events_power_efficient] pid: 34 mem: 0.00 MiB (0.0%) 3: cpu: 0.8% command: systemd-udevd pid: 147 mem: 3.74 MiB (0.3%) 4: cpu: 0.8% command: dbus-daemon pid: 380 mem: 2.93 MiB (0.3%) 5: cpu: 0.6% command: systemd-journald pid: 123 mem: 6.16 MiB (0.6%) Memory top: 5 of 116 1: mem: 8.04 MiB (0.8%) command: init pid: 1 cpu: 8.5% 2: mem: 6.65 MiB (0.6%) command: systemd pid: 565 cpu: 0.2% 3: mem: 6.16 MiB (0.6%) command: systemd-journald pid: 123 cpu: 0.6% 4: mem: 6.13 MiB (0.6%) command: sshd: pid: 554 cpu: 0.3% 5: mem: 5.44 MiB (0.5%) command: systemd-timesyncd pid: 305 cpu: 0.4% Info: Processes: 116 Uptime: 1m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

System:    Kernel: 5.10.17-v7+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 
           bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=e4796465-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 989.8 MiB used: 130.9 MiB (13.2%) gpu: 16 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc 
           class-ID: fb 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: No display server data found. Headless machine? tty: 130x40 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v7+ running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:3f300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial 
           Report: ID: hci0 state: up address:  bt-v: 2.1 lmp-v: 4.1 sub-v: 2209 
           hci-v: 4.1 rev: 1fc 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 29.72 GiB used: 1.37 GiB (4.6%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Silicon Motion model: SM32G size: 29.72 GiB 
           block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 29.47 GiB size: 28.98 GiB (98.34%) used: 1.33 GiB (4.6%) fs: ext4 
           block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs 
           uuid: fa37d505-e741-4d35-bcec-4580aef395e1 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat 
           block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 7581-8A48 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No Unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           power: 2mA chip-ID: 0424:9514 class-ID: 0900 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA 
           chip-ID: 0424:ec00 class-ID: ff00 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 505 lib: 250 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 116 
           1: cpu: 8.5% command: init pid: 1 mem: 8.04 MiB (0.8%) 
           2: cpu: 2.2% command: [kworker/2:1-events_power_efficient] pid: 34 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.8% command: systemd-udevd pid: 147 mem: 3.74 MiB (0.3%) 
           4: cpu: 0.8% command: dbus-daemon pid: 380 mem: 2.93 MiB (0.3%) 
           5: cpu: 0.6% command: systemd-journald pid: 123 mem: 6.16 MiB (0.6%) 
           Memory top: 5 of 116 
           1: mem: 8.04 MiB (0.8%) command: init pid: 1 cpu: 8.5% 
           2: mem: 6.65 MiB (0.6%) command: systemd pid: 565 cpu: 0.2% 
           3: mem: 6.16 MiB (0.6%) command: systemd-journald pid: 123 cpu: 0.6% 
           4: mem: 6.13 MiB (0.6%) command: sshd: pid: 554 cpu: 0.3% 
           5: mem: 5.44 MiB (0.5%) command: systemd-timesyncd pid: 305 cpu: 0.4% 
Info:      Processes: 116 Uptime: 1m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: 
           gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

Benchmark #42856 - Brand: SanDisk SD Extreme Pro A1 (SM32G)