Benchmark #43051 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SC16G)
A1 C10 U1
#7 / 1,539
884
#1,218 / 1,539
#202 / 369
1,084
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-03-30 14:26:08
#43,051
1,110
+26 (+2.34%)
rsd
SD Card

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SC16G)
A1 C10 U1
14.6G
SD
SanDisk
SC16G
SDHC
5.00
0x03
SD
8.0
07/2020
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
18.6 MB/s
41.07 MB/s
39.87 MB/s
727 IOPS
3,083 IOPS
2,911 KB/s
12,333 KB/s
9,160 KB/s
3,556 KB/s
8,869 KB/s
2,484 KB/s

inxi Results
System: Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=58932d89-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 Memory: RAM: total: 7.76 GiB used: 540 MiB (6.8%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 102 size: 477x268mm (18.8x10.6") diag: 547mm (21.5") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes Sound Server-2: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: ID: hci0 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 14.84 GiB used: 3 GiB (20.2%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SC16G size: 14.84 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 14.58 GiB size: 14.3 GiB (98.02%) used: 2.95 GiB (20.6%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 3857a514-b0f4-49ce-8430-34762068bb6f ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 8D64-2011 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.2:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 05e3:0610 class-ID: 0900 Device-1: 1-1.2.1:5 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0006 class-ID: 0300 Device-2: 1-1.4:4 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 093a:2510 class-ID: 0301 Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1393 lib: 685 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 155 1: cpu: 0.9% command: [kworker/u8:3-brcmf_wq/mmc1:0001:1] pid: 1384 mem: 0.00 MiB (0.0%) 2: cpu: 0.7% command: lxterminal pid: 1327 mem: 48.0 MiB (0.6%) 3: cpu: 0.2% command: packagekitd pid: 1528 mem: 12.8 MiB (0.1%) 4: cpu: 0.1% command: init pid: 1 mem: 8.19 MiB (0.1%) 5: cpu: 0.1% command: xorg pid: 553 mem: 64.2 MiB (0.8%) Memory top: 5 of 155 1: mem: 64.2 MiB (0.8%) command: xorg pid: 553 cpu: 0.1% 2: mem: 48.0 MiB (0.6%) command: lxterminal pid: 1327 cpu: 0.7% 3: mem: 28.9 MiB (0.3%) command: lxpanel pid: 772 cpu: 0.0% 4: mem: 27.1 MiB (0.3%) command: applet.py started by: python3 pid: 797 cpu: 0.0% 5: mem: 24.7 MiB (0.3%) command: pcmanfm pid: 773 cpu: 0.0% Info: Processes: 155 Uptime: 1h 02m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

System:    Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=58932d89-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 
           Memory:    RAM: total: 7.76 GiB used: 540 MiB (6.8%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting 
           unloaded: fbdev display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 102 size: 477x268mm (18.8x10.6") 
           diag: 547mm (21.5") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes 
           Sound Server-2: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: down mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: ID: hci0 state: up address:  bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 
           hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
           service-classes: rendering, capturing 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 14.84 GiB used: 3 GiB (20.2%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SC16G size: 14.84 GiB 
           block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 14.58 GiB size: 14.3 GiB (98.02%) used: 2.95 GiB (20.6%) fs: ext4 
           block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs 
           uuid: 3857a514-b0f4-49ce-8430-34762068bb6f 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat 
           block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 8D64-2011 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No Unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 1-1.2:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           power: 100mA chip-ID: 05e3:0610 class-ID: 0900 
           Device-1: 1-1.2.1:5 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0006 class-ID: 0300 
           Device-2: 1-1.4:4 info: Pixart Imaging Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA 
           chip-ID: 093a:2510 class-ID: 0301 
           Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 1393 lib: 685 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 155 
           1: cpu: 0.9% command: [kworker/u8:3-brcmf_wq/mmc1:0001:1] pid: 1384 
           mem: 0.00 MiB (0.0%) 
           2: cpu: 0.7% command: lxterminal pid: 1327 mem: 48.0 MiB (0.6%) 
           3: cpu: 0.2% command: packagekitd pid: 1528 mem: 12.8 MiB (0.1%) 
           4: cpu: 0.1% command: init pid: 1 mem: 8.19 MiB (0.1%) 
           5: cpu: 0.1% command: xorg pid: 553 mem: 64.2 MiB (0.8%) 
           Memory top: 5 of 155 
           1: mem: 64.2 MiB (0.8%) command: xorg pid: 553 cpu: 0.1% 
           2: mem: 48.0 MiB (0.6%) command: lxterminal pid: 1327 cpu: 0.7% 
           3: mem: 28.9 MiB (0.3%) command: lxpanel pid: 772 cpu: 0.0% 
           4: mem: 27.1 MiB (0.3%) command: applet.py started by: python3 pid: 797 cpu: 0.0% 
           5: mem: 24.7 MiB (0.3%) command: pcmanfm pid: 773 cpu: 0.0% 
Info:      Processes: 155 Uptime: 1h 02m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.03

Benchmark #43051 - Brand: SanDisk SD Ultra A1 (SC16G)