Benchmark #43064 - pibenchmarks.com

Brand: SanDisk Extreme Pro USB
SSD (Portable)
#42 / 1,539
272
#872 / 1,539
#801 / 875
#123 / 137
3,262
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-03-30 20:23:33
#43,064
2,703
-559 (-20.68%)
thelevti

Storage Details
SanDisk Extreme Pro USB
SSD (Portable)
128G
SSD
SanDisk
pSSD
1.8 inch
SATA
3.00
5,000
1d6b:5588
0x1d6b (Linux Foundation)
0x5588
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
69.2 MB/s
157.44 MB/s
134.82 MB/s
2,792 IOPS
2,535 IOPS
11,171 KB/s
10,143 KB/s
22,900 KB/s
17,950 KB/s
9,573 KB/s
8,250 KB/s

inxi Results
System: Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:3840x2160M@30 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=c6e29af4-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 Memory: RAM: total: 7.76 GiB used: 712.9 MiB (9.0%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 676x380mm (26.6x15.0") s-diag: 775mm (30.5") Monitor-1: HDMI-1 res: 2560x1440 hz: 60 dpi: 107 size: 608x345mm (23.9x13.6") diag: 699mm (27.5") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: vethdc5d798 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: ID: hci0 state: down bt-service: enabled, running address: Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 178.73 GiB used: 26.06 GiB (14.6%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: SN64G size: 59.48 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Extreme Pro drive model: pSSD family: based SSDs size: 119.25 GiB block-size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rotation: SSD rev: 6EB 1030 temp: 8 C scheme: MBR SMART: yes state: enabled health: FAILED! read: 0 KiB written: 0 KiB Pre-Fail: attribute: Perc_Avail_Resrvd_Space threshold: 5 alert: FAILING_NOW Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 119 GiB size: 116.63 GiB (98.01%) used: 12.99 GiB (11.1%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: b2754152-e8ec-4cc4-8898-42b7cc77dd87 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 2F50-B4D6 ID-3: /media/pi/boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 2F50-B4D6 ID-4: /media/pi/rootfs raw-size: 59.22 GiB size: 58.04 GiB (98.01%) used: 12.98 GiB (22.4%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: b2754152-e8ec-4cc4-8898-42b7cc77dd87 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.4:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 1a40:0101 class-ID: 0900 Device-1: 1-1.4.1:4 info: Sunplus Innovation Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 98mA chip-ID: 1bcf:0005 class-ID: 0301 Device-2: 1-1.4.2:5 info: Microdia Foot Switch type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 0c45:7403 class-ID: 0301 Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 0781:5588 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2293 lib: 1069 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 187 1: cpu: 8.1% command: init pid: 1 mem: 8.08 MiB (0.1%) 2: cpu: 7.0% command: xorg pid: 599 mem: 76.7 MiB (0.9%) 3: cpu: 6.0% command: jupyterhub started by: python3 pid: 1200 mem: 40.4 MiB (0.5%) 4: cpu: 5.9% command: configurable-http-proxy started by: node pid: 1364 mem: 35.8 MiB (0.4%) 5: cpu: 3.7% command: raspi_info.txt started by: mousepad pid: 1380 mem: 49.4 MiB (0.6%) Memory top: 5 of 187 1: mem: 76.7 MiB (0.9%) command: xorg pid: 599 cpu: 7.0% 2: mem: 62.6 MiB (0.7%) command: dockerd pid: 636 cpu: 2.4% 3: mem: 49.4 MiB (0.6%) command: raspi_info.txt started by: mousepad pid: 1380 cpu: 3.7% 4: mem: 42.1 MiB (0.5%) command: vncserver-x11-core pid: 507 cpu: 0.7% 5: mem: 40.4 MiB (0.5%) command: jupyterhub started by: python3 pid: 1200 cpu: 6.0% Info: Processes: 187 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

System:    Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:3840x2160M@30 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=c6e29af4-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 
           Memory:    RAM: total: 7.76 GiB used: 712.9 MiB (9.0%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting 
           unloaded: fbdev display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 676x380mm (26.6x15.0") 
           s-diag: 775mm (30.5") 
           Monitor-1: HDMI-1 res: 2560x1440 hz: 60 dpi: 107 size: 608x345mm (23.9x13.6") 
           diag: 699mm (27.5") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes 
           Sound Server-2: JACK v: 1.9.12 running: no 
           Sound Server-3: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: vethdc5d798 state: up speed: 10000 Mbps duplex: full mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: ID: hci0 state: down bt-service: enabled, running address:  
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 178.73 GiB used: 26.06 GiB (14.6%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 model: SN64G size: 59.48 GiB block-size: 
           physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Extreme Pro 
           drive model: pSSD family: based SSDs size: 119.25 GiB block-size: physical: 512 B 
           logical: 512 B sata: 3.0 speed: 6.0 Gb/s rotation: SSD rev: 6EB 1030 temp: 8 C scheme: MBR 
           SMART: yes state: enabled health: FAILED! read: 0 KiB written: 0 KiB Pre-Fail: 
           attribute: Perc_Avail_Resrvd_Space threshold: 5 alert: FAILING_NOW 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 119 GiB size: 116.63 GiB (98.01%) used: 12.99 GiB (11.1%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: b2754152-e8ec-4cc4-8898-42b7cc77dd87 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 2F50-B4D6 
           ID-3: /media/pi/boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) 
           fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot 
           uuid: 2F50-B4D6 
           ID-4: /media/pi/rootfs raw-size: 59.22 GiB size: 58.04 GiB (98.01%) 
           used: 12.98 GiB (22.4%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 
           label: rootfs uuid: b2754152-e8ec-4cc4-8898-42b7cc77dd87 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No Unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 1-1.4:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA 
           chip-ID: 1a40:0101 class-ID: 0900 
           Device-1: 1-1.4.1:4 info: Sunplus Innovation Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 98mA 
           chip-ID: 1bcf:0005 class-ID: 0301 
           Device-2: 1-1.4.2:5 info: Microdia Foot Switch type: Keyboard,Mouse 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA 
           chip-ID: 0c45:7403 class-ID: 0301 
           Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-1:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip-ID: 0781:5588 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 2293 lib: 1069 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 187 
           1: cpu: 8.1% command: init pid: 1 mem: 8.08 MiB (0.1%) 
           2: cpu: 7.0% command: xorg pid: 599 mem: 76.7 MiB (0.9%) 
           3: cpu: 6.0% command: jupyterhub started by: python3 pid: 1200 mem: 40.4 MiB (0.5%) 
           4: cpu: 5.9% command: configurable-http-proxy started by: node pid: 1364 
           mem: 35.8 MiB (0.4%) 
           5: cpu: 3.7% command: raspi_info.txt started by: mousepad pid: 1380 
           mem: 49.4 MiB (0.6%) 
           Memory top: 5 of 187 
           1: mem: 76.7 MiB (0.9%) command: xorg pid: 599 cpu: 7.0% 
           2: mem: 62.6 MiB (0.7%) command: dockerd pid: 636 cpu: 2.4% 
           3: mem: 49.4 MiB (0.6%) command: raspi_info.txt started by: mousepad pid: 1380 
           cpu: 3.7% 
           4: mem: 42.1 MiB (0.5%) command: vncserver-x11-core pid: 507 cpu: 0.7% 
           5: mem: 40.4 MiB (0.5%) command: jupyterhub started by: python3 pid: 1200 cpu: 6.0% 
Info:      Processes: 187 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.03

Benchmark #43064 - Brand: SanDisk Extreme Pro USB