Benchmark #43086 - pibenchmarks.com

Brand: SanDisk SD Ultra (SL16G)
C10 U1
#58 / 1,700
333
#1,504 / 1,700
#63 / 404
796
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-03-31 08:42:45
#43,086
587
-209 (-35.60%)
pruebachip
prueba

Secure Digital (SD) Card Details
SanDisk SD Ultra (SL16G)
C10 U1
14.6G
SD
SanDisk
SL16G
SDHC
3.00
0x03
SD
8.0
08/2014
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,200
400
450
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
11.9 MB/s
21.62 MB/s
21.58 MB/s
195 IOPS
1,848 IOPS
782 KB/s
7,394 KB/s
6,364 KB/s
2,102 KB/s
5,371 KB/s
823 KB/s

inxi Results
System: Host: pi3 Kernel: 5.10.17-v7+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c1a7e2bd-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1000.2 MiB used: 329.5 MiB (32.9%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: fbturbo tty: 237x66 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7+ running: yes Sound Server-2: PulseAudio v: 12.2 running: no Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 class-ID: mmcnr IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::3069:16d:1c38:b5de/64 scope: link IF-ID-1: docker0 state: down mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: 10.8.X.X/24 scope: global broadcast: 10.8.X.X IP v6: fe80::900d:b2f4:be54:f69a/64 virtual: stable-privacy scope: link WAN IP: 83.44.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial Report: ID: hci0 state: up address: XX:XX:XX:XX:XX:XX bt-v: 2.1 lmp-v: 4.1 sub-v: 2209 hci-v: 4.1 rev: 1fc Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 14.84 GiB used: 5.43 GiB (36.6%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SL16G size: 14.84 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 14.58 GiB size: 14.3 GiB (98.03%) used: 5.38 GiB (37.6%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 163660a6-ad17-44fc-99c5-5c75e78ad815 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: F4F1-BC2C Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 21.5 MiB (21.5%) priority: -2 file: /var/swap Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:9514 class-ID: 0900 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:ec00 class-ID: ff00 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1473 lib: 709 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 138 1: cpu: 1.8% command: [kworker/2:0-events_power_efficient] pid: 29523 mem: 0.00 MiB (0.0%) 2: cpu: 0.3% command: adguardhome pid: 856 mem: 36.3 MiB (3.9%) 3: cpu: 0.3% command: pihole-ftl pid: 14166 mem: 12.3 MiB (1.3%) 4: cpu: 0.3% command: -bash pid: 29014 mem: 3.79 MiB (0.4%) 5: cpu: 0.2% command: [kworker/1:2-events] pid: 28997 mem: 0.00 MiB (0.0%) Memory top: 5 of 138 1: mem: 36.3 MiB (3.9%) command: adguardhome pid: 856 cpu: 0.3% 2: mem: 31.3 MiB (3.3%) command: dockerd pid: 633 cpu: 0.1% 3: mem: 17.6 MiB (1.9%) command: containerd pid: 517 cpu: 0.0% 4: mem: 15.5 MiB (1.6%) command: unattended-upgrade-shutdown started by: python3 pid: 512 cpu: 0.0% 5: mem: 14.4 MiB (1.5%) command: php-cgi pid: 638 cpu: 0.0% Info: Processes: 138 Uptime: 12d 10h 27m Init: systemd v: 241 runlevel: 3 target: multi-user.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) default: Bash v: 5.0.3 running-in: tty pts/0 (SSH) inxi: 3.3.03

inxi Results

System:    Host: pi3 Kernel: 5.10.17-v7+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c1a7e2bd-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
Memory:    RAM: total: 1000.2 MiB used: 329.5 MiB (32.9%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 4 bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.org 1.20.4 driver: loaded: fbturbo tty: 237x66 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v7+ running: yes 
           Sound Server-2: PulseAudio v: 12.2 running: no 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 class-ID: mmcnr 
           IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus-ID: 1-1.1:3 
           chip-ID: 0424:ec00 class-ID: ff00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::3069:16d:1c38:b5de/64 scope: link 
           IF-ID-1: docker0 state: down mac: XX:XX:XX:XX:XX:XX 
           IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X 
           IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4: 10.8.X.X/24 scope: global broadcast: 10.8.X.X 
           IP v6: fe80::900d:b2f4:be54:f69a/64 virtual: stable-privacy scope: link 
           WAN IP: 83.44.X.X 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial 
           Report: ID: hci0 state: up address: XX:XX:XX:XX:XX:XX bt-v: 2.1 lmp-v: 4.1 sub-v: 2209 hci-v: 4.1 rev: 1fc 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 14.84 GiB used: 5.43 GiB (36.6%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SL16G size: 14.84 GiB block-size: physical: 512 B 
           logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 14.58 GiB size: 14.3 GiB (98.03%) used: 5.38 GiB (37.6%) fs: ext4 block-size: 4096 B 
           dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 163660a6-ad17-44fc-99c5-5c75e78ad815 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B 
           dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: F4F1-BC2C 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 21.5 MiB (21.5%) priority: -2 file: /var/swap 
Unmounted: Message: No Unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s power: 2mA 
           chip-ID: 0424:9514 class-ID: 0900 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx 
           interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:ec00 class-ID: ff00 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 1473 lib: 709 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 138 
           1: cpu: 1.8% command: [kworker/2:0-events_power_efficient] pid: 29523 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.3% command: adguardhome pid: 856 mem: 36.3 MiB (3.9%) 
           3: cpu: 0.3% command: pihole-ftl pid: 14166 mem: 12.3 MiB (1.3%) 
           4: cpu: 0.3% command: -bash pid: 29014 mem: 3.79 MiB (0.4%) 
           5: cpu: 0.2% command: [kworker/1:2-events] pid: 28997 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 138 
           1: mem: 36.3 MiB (3.9%) command: adguardhome pid: 856 cpu: 0.3% 
           2: mem: 31.3 MiB (3.3%) command: dockerd pid: 633 cpu: 0.1% 
           3: mem: 17.6 MiB (1.9%) command: containerd pid: 517 cpu: 0.0% 
           4: mem: 15.5 MiB (1.6%) command: unattended-upgrade-shutdown started by: python3 pid: 512 cpu: 0.0% 
           5: mem: 14.4 MiB (1.5%) command: php-cgi pid: 638 cpu: 0.0% 
Info:      Processes: 138 Uptime: 12d 10h 27m Init: systemd v: 241 runlevel: 3 target: multi-user.target tool: systemctl 
           Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) default: Bash v: 5.0.3 running-in: tty pts/0 (SSH) 
           inxi: 3.3.03

Benchmark #43086 - Brand: SanDisk SD Ultra (SL16G)