Benchmark #43154 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SC200)
A1 C10 U1
#371 / 1,665
27
#1,229 / 1,665
#132 / 389
1,332
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-04-01 13:08:57
#43,154
1,151
-181 (-15.73%)
Anonymous

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SC200)
A1 C10 U1
180.7G
SD
SanDisk
SC200
SDXC
5.00
0x03
SD
8.0
03/2020
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
21.7 MB/s
41.31 MB/s
39.63 MB/s
845 IOPS
3,186 IOPS
3,380 KB/s
12,746 KB/s
9,771 KB/s
3,466 KB/s
8,002 KB/s
2,723 KB/s

inxi Results
System: Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Memory: RAM: total: 3.81 GiB used: 647.7 MiB (16.6%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 305 size: 160x90mm (6.3x3.5") diag: 184mm (7.2") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: ID: hci0 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: capturing, telephony Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 474.46 GiB used: 219.94 GiB (46.4%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: SC200 size: 183.35 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 840 EVO 250GB family: based SSDs size: 232.89 GiB block-size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: SSD rev: EXT0DB6Q temp: 27 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 16d 2h cycles: 3943 written: 6.15 TiB ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: SanDisk model: Cruzer Force size: 58.23 GiB block-size: physical: 512 B logical: 512 B rev: 1.27 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 180.67 GiB size: 176.83 GiB (97.88%) used: 94.95 GiB (53.7%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p7 maj-min: 179:7 label: root uuid: 0010e59b-5203-4acf-b466-b2b7713705eb ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p6 maj-min: 179:6 label: boot uuid: E159-627F ID-3: /media/pi/75D8-2F80 raw-size: 58.23 GiB size: 58.21 GiB (99.98%) used: 27.65 GiB (47.5%) fs: vfat block-size: 512 B dev: /dev/sdb1 maj-min: 8:17 label: N/A uuid: 75D8-2F80 ID-4: /media/pi/boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/sda6 maj-min: 8:6 label: boot uuid: E159-627F ID-5: /media/pi/root raw-size: 230.21 GiB size: 225.6 GiB (98.00%) used: 94.95 GiB (42.1%) fs: ext4 block-size: 4096 B dev: /dev/sda7 maj-min: 8:7 label: root uuid: 0010e59b-5203-4acf-b466-b2b7713705eb ID-6: /tmp/tmp.RnnQFvBvYh raw-size: 2.38 GiB size: 2.37 GiB (99.80%) used: 2.29 GiB (96.7%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: RECOVERY uuid: 17FA-1E55 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 maj-min: 179:2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-2: /dev/mmcblk0p5 maj-min: 179:5 size: 32 MiB fs: ext4 label: SETTINGS uuid: 12cdb97f-4823-428c-b487-dc33b0be44cc ID-3: /dev/sda1 maj-min: 8:1 size: 2.38 GiB fs: vfat label: RECOVERY uuid: 17FA-1E55 ID-4: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-5: /dev/sda5 maj-min: 8:5 size: 32 MiB fs: ext4 label: SETTINGS uuid: 12cdb97f-4823-428c-b487-dc33b0be44cc USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.2:3 info: SanDisk Cruzer Force (64GB) type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 200mA chip-ID: 0781:557d class-ID: 0806 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2323 lib: 1097 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 192 1: cpu: 2.6% command: xorg pid: 628 mem: 76.8 MiB (2.0%) 2: cpu: 2.1% command: init pid: 1 mem: 8.08 MiB (0.2%) 3: cpu: 1.8% command: vncserver-x11-core pid: 554 mem: 32.5 MiB (0.8%) 4: cpu: 1.8% command: perl pid: 766 mem: 57.9 MiB (1.5%) 5: cpu: 1.3% command: apache2 pid: 796 mem: 37.2 MiB (0.9%) Memory top: 5 of 192 1: mem: 81.7 MiB (2.1%) command: mysqld pid: 612 cpu: 0.5% 2: mem: 76.8 MiB (2.0%) command: xorg pid: 628 cpu: 2.6% 3: mem: 57.9 MiB (1.5%) command: perl pid: 766 cpu: 1.8% 4: mem: 53.0 MiB (1.3%) command: spamd pid: 1187 cpu: 0.0% 5: mem: 52.9 MiB (1.3%) command: spamd pid: 1188 cpu: 0.0% Info: Processes: 192 Uptime: 4m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

System:    Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 
           Memory:    RAM: total: 3.81 GiB used: 647.7 MiB (16.6%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting 
           unloaded: fbdev display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 305 size: 160x90mm (6.3x3.5") 
           diag: 184mm (7.2") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes 
           Sound Server-2: JACK v: 1.9.12 running: no 
           Sound Server-3: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: ID: hci0 state: up address:  bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 
           hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
           service-classes: capturing, telephony 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 474.46 GiB used: 219.94 GiB (46.4%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 model: SC200 size: 183.35 GiB block-size: 
           physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 840 EVO 250GB 
           family: based SSDs size: 232.89 GiB block-size: physical: 512 B logical: 512 B 
           sata: 3.1 speed: 6.0 Gb/s rotation: SSD rev: EXT0DB6Q temp: 27 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 16d 2h cycles: 3943 written: 6.15 TiB 
           ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: SanDisk model: Cruzer Force 
           size: 58.23 GiB block-size: physical: 512 B logical: 512 B rev: 1.27 
           scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 180.67 GiB size: 176.83 GiB (97.88%) used: 94.95 GiB (53.7%) fs: ext4 
           block-size: 4096 B dev: /dev/mmcblk0p7 maj-min: 179:7 label: root 
           uuid: 0010e59b-5203-4acf-b466-b2b7713705eb 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat 
           block-size: 512 B dev: /dev/mmcblk0p6 maj-min: 179:6 label: boot uuid: E159-627F 
           ID-3: /media/pi/75D8-2F80 raw-size: 58.23 GiB size: 58.21 GiB (99.98%) 
           used: 27.65 GiB (47.5%) fs: vfat block-size: 512 B dev: /dev/sdb1 maj-min: 8:17 
           label: N/A uuid: 75D8-2F80 
           ID-4: /media/pi/boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) 
           fs: vfat block-size: 512 B dev: /dev/sda6 maj-min: 8:6 label: boot uuid: E159-627F 
           ID-5: /media/pi/root raw-size: 230.21 GiB size: 225.6 GiB (98.00%) 
           used: 94.95 GiB (42.1%) fs: ext4 block-size: 4096 B dev: /dev/sda7 maj-min: 8:7 
           label: root uuid: 0010e59b-5203-4acf-b466-b2b7713705eb 
           ID-6: /tmp/tmp.RnnQFvBvYh raw-size: 2.38 GiB size: 2.37 GiB (99.80%) 
           used: 2.29 GiB (96.7%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 
           label: RECOVERY uuid: 17FA-1E55 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 maj-min: 179:2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-2: /dev/mmcblk0p5 maj-min: 179:5 size: 32 MiB fs: ext4 label: SETTINGS 
           uuid: 12cdb97f-4823-428c-b487-dc33b0be44cc 
           ID-3: /dev/sda1 maj-min: 8:1 size: 2.38 GiB fs: vfat label: RECOVERY uuid: 17FA-1E55 
           ID-4: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-5: /dev/sda5 maj-min: 8:5 size: 32 MiB fs: ext4 label: SETTINGS 
           uuid: 12cdb97f-4823-428c-b487-dc33b0be44cc 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.2:3 info: SanDisk Cruzer Force (64GB) type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 200mA 
           chip-ID: 0781:557d class-ID: 0806 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 174c:55aa class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 2323 lib: 1097 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 192 
           1: cpu: 2.6% command: xorg pid: 628 mem: 76.8 MiB (2.0%) 
           2: cpu: 2.1% command: init pid: 1 mem: 8.08 MiB (0.2%) 
           3: cpu: 1.8% command: vncserver-x11-core pid: 554 mem: 32.5 MiB (0.8%) 
           4: cpu: 1.8% command: perl pid: 766 mem: 57.9 MiB (1.5%) 
           5: cpu: 1.3% command: apache2 pid: 796 mem: 37.2 MiB (0.9%) 
           Memory top: 5 of 192 
           1: mem: 81.7 MiB (2.1%) command: mysqld pid: 612 cpu: 0.5% 
           2: mem: 76.8 MiB (2.0%) command: xorg pid: 628 cpu: 2.6% 
           3: mem: 57.9 MiB (1.5%) command: perl pid: 766 cpu: 1.8% 
           4: mem: 53.0 MiB (1.3%) command: spamd pid: 1187 cpu: 0.0% 
           5: mem: 52.9 MiB (1.3%) command: spamd pid: 1188 cpu: 0.0% 
Info:      Processes: 192 Uptime: 4m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.03

Benchmark #43154 - Brand: SanDisk SD Ultra A1 (SC200)