Benchmark #43212 - pibenchmarks.com

Brand: Generic USB Disk
USB Flash
#13 / 1,539
610
#828 / 1,539
#4 / 90
#8 / 86
4,005
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-04-02 13:10:06
#43,212
7,846
+3,841 (+48.95%)
daki
Transcend 128GB PCIe Gen3 x4 M.2 SSD w. ORICO M2PV-C3

Storage Details
Generic USB Disk
USB Flash
119G
USB Flash
Generic
GenericFlashDisk
0bda:9210
0x0bda (Realtek Semiconductor Corp.)
0x9210 (RTL9210 M.2 NVME Adapter)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
174 MB/s
295.42 MB/s
231.7 MB/s
9,701 IOPS
22,882 IOPS
38,806 KB/s
91,530 KB/s
29,404 KB/s
25,494 KB/s
17,888 KB/s
29,149 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TERMINAL = "iTerm2", LC_CTYPE = "UTF-8", LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_US.UTF-8"). System: Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=238665cb-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Memory: RAM: total: 3.8 GiB used: 925.7 MiB (23.8%) gpu: 16 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 152x40 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: type: noprefixroute scope: global IP v6: scope: link Device-2: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: mmcnr IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: veth185bb0c state: up speed: 10000 Mbps duplex: full mac: IF-ID-3: veth2333b33 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth4283983 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth44856b7 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth4e91977 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth5ad83e2 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth7499e6c state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethbc7364d state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethbdb9e72 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: vethc37684f state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: vethc4ebf5c state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: ID: hci0 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 119.24 GiB used: 26.3 GiB (22.1%) ID-1: /dev/sda maj-min: 8:0 type: USB model: External M.2 NVME size: 119.24 GiB block-size: physical: 512 B logical: 512 B rotation: SSD rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 118.99 GiB size: 117.13 GiB (98.44%) used: 26.25 GiB (22.4%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 2887d26c-6ae7-449d-9701-c5a4018755b0 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.7 MiB (19.3%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 4AD7-B4D5 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 2 GiB used: 7.3 MiB (0.4%) priority: -2 file: /var/swap Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.2:3 info: Dresden Elektronik type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 1cf1:0030 class-ID: 0a00 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: Realtek type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0bda:9210 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 544 lib: 255 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker-ce.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/download_docker_com_linux_debian.list 1: deb [arch=amd64] https: //download.docker.com/linux/debian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 152 1: cpu: 9.0% command: adguardhome pid: 2854 mem: 105.6 MiB (2.7%) 2: cpu: 6.7% command: python3 pid: 2426 mem: 145.7 MiB (3.7%) 3: cpu: 4.8% command: influxd pid: 2366 mem: 152.4 MiB (3.9%) 4: cpu: 3.4% command: mysqld pid: 2059 mem: 204.5 MiB (5.2%) 5: cpu: 2.4% command: node-red pid: 3046 mem: 88.1 MiB (2.2%) Memory top: 5 of 152 1: mem: 204.5 MiB (5.2%) command: mysqld pid: 2059 cpu: 3.4% 2: mem: 152.4 MiB (3.9%) command: influxd pid: 2366 cpu: 4.8% 3: mem: 145.7 MiB (3.7%) command: python3 pid: 2426 cpu: 6.7% 4: mem: 105.6 MiB (2.7%) command: adguardhome pid: 2854 cpu: 9.0% 5: mem: 88.1 MiB (2.2%) command: node-red pid: 3046 cpu: 2.4% Info: Processes: 152 Uptime: 2h 18m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_TERMINAL = "iTerm2",
	LC_CTYPE = "UTF-8",
	LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
System:    Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 
           bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=238665cb-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 
           Memory:    RAM: total: 3.8 GiB used: 925.7 MiB (23.8%) gpu: 16 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: fb 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: No display server data found. Headless machine? tty: 152x40 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: noprefixroute scope: global 
           IP v6:  scope: link 
           Device-2: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc 
           class-ID: mmcnr 
           IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: veth185bb0c state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-3: veth2333b33 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: veth4283983 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth44856b7 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth4e91977 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth5ad83e2 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: veth7499e6c state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: vethbc7364d state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: vethbdb9e72 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: vethc37684f state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-12: vethc4ebf5c state: up speed: 10000 Mbps duplex: full mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: ID: hci0 state: up address:  bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 
           hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 119.24 GiB used: 26.3 GiB (22.1%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB model: External M.2 NVME size: 119.24 GiB 
           block-size: physical: 512 B logical: 512 B rotation: SSD rev: 1.00 
           scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 118.99 GiB size: 117.13 GiB (98.44%) used: 26.25 GiB (22.4%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: 2887d26c-6ae7-449d-9701-c5a4018755b0 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.7 MiB (19.3%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 4AD7-B4D5 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 2 GiB used: 7.3 MiB (0.4%) priority: -2 file: /var/swap 
Unmounted: Message: No Unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.2:3 info: Dresden Elektronik type: Abstract (modem),CDC-Data 
           driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 1cf1:0030 
           class-ID: 0a00 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-1:2 info: Realtek type: Mass Storage driver: uas interfaces: 1 rev: 3.2 
           speed: 5 Gb/s power: 896mA chip-ID: 0bda:9210 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 544 lib: 255 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker-ce.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/download_docker_com_linux_debian.list 
           1: deb [arch=amd64] https: //download.docker.com/linux/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 152 
           1: cpu: 9.0% command: adguardhome pid: 2854 mem: 105.6 MiB (2.7%) 
           2: cpu: 6.7% command: python3 pid: 2426 mem: 145.7 MiB (3.7%) 
           3: cpu: 4.8% command: influxd pid: 2366 mem: 152.4 MiB (3.9%) 
           4: cpu: 3.4% command: mysqld pid: 2059 mem: 204.5 MiB (5.2%) 
           5: cpu: 2.4% command: node-red pid: 3046 mem: 88.1 MiB (2.2%) 
           Memory top: 5 of 152 
           1: mem: 204.5 MiB (5.2%) command: mysqld pid: 2059 cpu: 3.4% 
           2: mem: 152.4 MiB (3.9%) command: influxd pid: 2366 cpu: 4.8% 
           3: mem: 145.7 MiB (3.7%) command: python3 pid: 2426 cpu: 6.7% 
           4: mem: 105.6 MiB (2.7%) command: adguardhome pid: 2854 cpu: 9.0% 
           5: mem: 88.1 MiB (2.2%) command: node-red pid: 3046 cpu: 2.4% 
Info:      Processes: 152 Uptime: 2h 18m Init: systemd v: 241 runlevel: 5 tool: systemctl 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

Benchmark #43212 - Brand: Generic USB Disk