Benchmark #43282 - pibenchmarks.com

Brand: Samsung 840
SSD (2.5" SATA)
#116 / 1,539
97
#703 / 1,539
#674 / 875
#241 / 363
5,140
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-04-03 15:14:14
#43,282
5,901
+761 (+12.90%)
sskaz
Samsung 840 on Pi using Eluteng SATA to USB bridgee

Storage Details
Samsung 840
SSD (2.5" SATA)
250G
SSD
Samsung
SSD840Series
SATA
3.00
5,000
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
65.4 MB/s
43.32 MB/s
192.32 MB/s
7,962 IOPS
17,777 IOPS
31,850 KB/s
71,111 KB/s
31,560 KB/s
25,634 KB/s
17,517 KB/s
24,559 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=7495e417-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: b03112 Memory: RAM: total: 1.97 GiB used: 359.8 MiB (17.9%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: gpu Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 129x66 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:soc class-ID: audio Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k4.19.118-v7l+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152 bus-ID: 2-2.4:5 chip-ID: 0bda:8153 class-ID: 0000 IF: eth1 state: down mac: IF-ID-1: br-223ee6ed9e54 state: down mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: br-577b7923099b state: down mac: IP v4: scope: global broadcast: IF-ID-3: br-7da187693dd4 state: down mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: br-a86cce2f9b53 state: down mac: IP v4: scope: global broadcast: IF-ID-5: br-b6bd3c4801e5 state: down mac: IP v4: scope: global broadcast: IF-ID-6: br-e0e1dfc4c4d8 state: down mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-7: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-8: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Device-1: bcm2835-pl011 driver: uart_pl011 bus-ID: N/A chip-ID: brcm:fe201000 class-ID: serial Report: ID: hci0 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 13b Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 7.5 TiB used: 5.9 TiB (78.6%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 840 Series family: based SSDs size: 232.89 GiB block-size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: SSD rev: DXT06B0Q temp: 26 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2y 306d 11h cycles: 2246 written: 12.26 TiB ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Western Digital model: WD Elements 25A3 size: 7.28 TiB block-size: physical: 4096 B logical: 512 B rev: 1021 scheme: GPT SMART Message: A mandatory SMART command failed. Various possible causes. Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 232.63 GiB size: 229.01 GiB (98.44%) used: 19.65 GiB (8.6%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 706944a6-7d0f-4a45-9f8c-7fb07375e9f7 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 52 MiB (20.6%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 592B-C92C ID-3: /home//Volumes/Media8a raw-size: 7.28 TiB size: 7.22 TiB (99.20%) used: 5.88 TiB (81.5%) fs: ext4 block-size: 4096 B dev: /dev/sdb2 maj-min: 8:18 label: Media8a uuid: 5721c49c-c6b6-4186-a096-57f43fe41aa3 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 2 GiB used: 184.2 MiB (9.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sdb1 maj-min: 8:17 size: 200 MiB fs: vfat label: EFI uuid: 67E3-17ED USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.2:3 info: Realtek ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 0bda:5411 class-ID: 0900 Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Hub-5: 2-2:4 info: Realtek ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 0bda:0411 class-ID: 0900 Device-1: 2-2.1:6 info: Western Digital Elements Desktop (WDBWLG) type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 8mA chip-ID: 1058:25a3 class-ID: 0806 Device-2: 2-2.4:5 info: Realtek RTL8153 Gigabit Ethernet Adapter type: Network driver: r8152 interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 288mA chip-ID: 0bda:8153 class-ID: 0000 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 562 lib: 266 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/buster-backports.list 1: deb http: //deb.debian.org/debian buster-backports main Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 143 1: cpu: 1.0% command: homebridge pid: 21458 mem: 67.6 MiB (3.4%) 2: cpu: 0.4% command: [kworker/0:1+events_freezable] pid: 32362 mem: 0.00 MiB (0.0%) 3: cpu: 0.3% command: [kworker/0:2-events_power_efficient] pid: 30220 mem: 0.00 MiB (0.0%) 4: cpu: 0.3% command: bash pid: 32565 mem: 2.79 MiB (0.1%) 5: cpu: 0.2% command: dockerd pid: 630 mem: 30.8 MiB (1.5%) Memory top: 5 of 143 1: mem: 67.6 MiB (3.4%) command: homebridge pid: 21458 cpu: 1.0% 2: mem: 30.8 MiB (1.5%) command: dockerd pid: 630 cpu: 0.2% 3: mem: 23.4 MiB (1.2%) command: hb-service pid: 1650 cpu: 0.0% 4: mem: 12.5 MiB (0.6%) command: containerd pid: 628 cpu: 0.0% 5: mem: 6.16 MiB (0.3%) command: systemd-journald pid: 129 cpu: 0.0% Info: Processes: 143 Uptime: 5d 15h 53m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=7495e417-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: b03112 
           Memory:    RAM: total: 1.97 GiB used: 359.8 MiB (17.9%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:soc 
           class-ID: gpu 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: No display server data found. Headless machine? tty: 129x66 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:soc 
           class-ID: audio 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k4.19.118-v7l+ running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152 
           bus-ID: 2-2.4:5 chip-ID: 0bda:8153 class-ID: 0000 IF: eth1 state: down mac:  
           IF-ID-1: br-223ee6ed9e54 state: down mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: br-577b7923099b state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-3: br-7da187693dd4 state: down mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: br-a86cce2f9b53 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-5: br-b6bd3c4801e5 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-6: br-e0e1dfc4c4d8 state: down mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-7: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-8: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Device-1: bcm2835-pl011 driver: uart_pl011 bus-ID: N/A chip-ID: brcm:fe201000 
           class-ID: serial 
           Report: ID: hci0 state: up address:  bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 
           hci-v: 5.0 rev: 13b 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 7.5 TiB used: 5.9 TiB (78.6%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 840 Series 
           family: based SSDs size: 232.89 GiB block-size: physical: 512 B logical: 512 B 
           sata: 3.1 speed: 6.0 Gb/s rotation: SSD rev: DXT06B0Q temp: 26 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 2y 306d 11h cycles: 2246 
           written: 12.26 TiB 
           ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Western Digital model: WD Elements 25A3 
           size: 7.28 TiB block-size: physical: 4096 B logical: 512 B rev: 1021 
           scheme: GPT 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 232.63 GiB size: 229.01 GiB (98.44%) used: 19.65 GiB (8.6%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: 706944a6-7d0f-4a45-9f8c-7fb07375e9f7 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 52 MiB (20.6%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 592B-C92C 
           ID-3: /home//Volumes/Media8a raw-size: 7.28 TiB size: 7.22 TiB (99.20%) 
           used: 5.88 TiB (81.5%) fs: ext4 block-size: 4096 B dev: /dev/sdb2 maj-min: 8:18 
           label: Media8a uuid: 5721c49c-c6b6-4186-a096-57f43fe41aa3 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 2 GiB used: 184.2 MiB (9.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/sdb1 maj-min: 8:17 size: 200 MiB fs: vfat label: EFI uuid: 67E3-17ED 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 1-1.2:3 info: Realtek ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 0bda:5411 
           class-ID: 0900 
           Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa 
           class-ID: 0806 Hub-5: 2-2:4 info: Realtek ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 0bda:0411 
           class-ID: 0900 
           Device-1: 2-2.1:6 info: Western Digital Elements Desktop (WDBWLG) type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 8mA chip-ID: 1058:25a3 
           class-ID: 0806 Device-2: 2-2.4:5 info: Realtek RTL8153 Gigabit Ethernet Adapter type: Network 
           driver: r8152 interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 288mA chip-ID: 0bda:8153 
           class-ID: 0000 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 562 lib: 266 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/buster-backports.list 
           1: deb http: //deb.debian.org/debian buster-backports main
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 143 
           1: cpu: 1.0% command: homebridge pid: 21458 mem: 67.6 MiB (3.4%) 
           2: cpu: 0.4% command: [kworker/0:1+events_freezable] pid: 32362 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.3% command: [kworker/0:2-events_power_efficient] pid: 30220 
           mem: 0.00 MiB (0.0%) 
           4: cpu: 0.3% command: bash pid: 32565 mem: 2.79 MiB (0.1%) 
           5: cpu: 0.2% command: dockerd pid: 630 mem: 30.8 MiB (1.5%) 
           Memory top: 5 of 143 
           1: mem: 67.6 MiB (3.4%) command: homebridge pid: 21458 cpu: 1.0% 
           2: mem: 30.8 MiB (1.5%) command: dockerd pid: 630 cpu: 0.2% 
           3: mem: 23.4 MiB (1.2%) command: hb-service pid: 1650 cpu: 0.0% 
           4: mem: 12.5 MiB (0.6%) command: containerd pid: 628 cpu: 0.0% 
           5: mem: 6.16 MiB (0.3%) command: systemd-journald pid: 129 cpu: 0.0% 
Info:      Processes: 143 Uptime: 5d 15h 53m Init: systemd v: 241 runlevel: 5 tool: systemctl 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

Benchmark #43282 - Brand: Samsung 840