Benchmark #43293 - pibenchmarks.com

Brand: SanDisk Ultra Fit
USB Flash
#13 / 1,665
697
#1,402 / 1,665
#44 / 93
#43 / 89
1,003
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-04-03 19:13:13
#43,293
961
-42 (-4.37%)
thelevti

Storage Details
SanDisk Ultra Fit
USB Flash
114.3G
USB Flash
SanDisk
UltraFit
1d6b:5583
0x1d6b (Linux Foundation)
0x5583 (Ultra Fit)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
42.8 MB/s
80.98 MB/s
65.37 MB/s
280 IOPS
811 IOPS
1,121 KB/s
3,247 KB/s
15,858 KB/s
1,698 KB/s
4,504 KB/s
1,155 KB/s

inxi Results
System: Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=13b55798-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 Memory: RAM: total: 7.76 GiB used: 722.1 MiB (9.1%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.7x15.0") s-diag: 777mm (30.6") Monitor-1: HDMI-1 res: 2560x1440 hz: 60 dpi: 109 size: 597x336mm (23.5x13.2") diag: 685mm (27") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: veth5986dee state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: ID: hci0 state: down bt-service: enabled, running address: Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 174.04 GiB used: 27.92 GiB (16.0%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: SN64G size: 59.48 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Ultra Fit size: 114.56 GiB block-size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 114.31 GiB size: 112.01 GiB (97.99%) used: 14.84 GiB (13.2%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: b2754152-e8ec-4cc4-8898-42b7cc77dd87 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 2F50-B4D6 ID-3: /media/pi/boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 2F50-B4D6 ID-4: /media/pi/rootfs raw-size: 59.22 GiB size: 58.04 GiB (98.01%) used: 12.98 GiB (22.4%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: b2754152-e8ec-4cc4-8898-42b7cc77dd87 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.4:3 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 05e3:0608 class-ID: 0900 Hub-4: 1-1.4.2:4 info: ASIX ports: 7 rev: 1.0 speed: 12 Mb/s power: 100mA chip-ID: 0b95:6802 class-ID: 0900 Device-1: 1-1.4.X.X:6 info: Sunplus Innovation Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 98mA chip-ID: 1bcf:0005 class-ID: 0301 Device-2: 1-1.4.X.X:7 info: China Resource Semico type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 98mA chip-ID: 1a2c:2124 class-ID: 0300 Hub-5: 1-1.4.3:5 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 05e3:0608 class-ID: 0900 Hub-6: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: SanDisk Ultra Fit type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 0781:5583 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: 2328 apt: 2321 lib: 1084 snap: 7 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 195 1: cpu: 6.2% command: init pid: 1 mem: 8.09 MiB (0.1%) 2: cpu: 6.1% command: mongod pid: 461 mem: 37.1 MiB (0.4%) 3: cpu: 5.0% command: configurable-http-proxy started by: node pid: 1477 mem: 36.0 MiB (0.4%) 4: cpu: 4.9% command: xorg pid: 617 mem: 77.1 MiB (0.9%) 5: cpu: 4.6% command: jupyterhub started by: python3 pid: 1412 mem: 39.9 MiB (0.5%) Memory top: 5 of 195 1: mem: 77.1 MiB (0.9%) command: xorg pid: 617 cpu: 4.9% 2: mem: 63.1 MiB (0.8%) command: dockerd pid: 663 cpu: 1.9% 3: mem: 48.2 MiB (0.6%) command: raspi_info.txt started by: mousepad pid: 1450 cpu: 2.8% 4: mem: 39.9 MiB (0.5%) command: jupyterhub started by: python3 pid: 1412 cpu: 4.6% 5: mem: 37.1 MiB (0.4%) command: mongod pid: 461 cpu: 6.1% Info: Processes: 195 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

System:    Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=13b55798-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 
           Memory:    RAM: total: 7.76 GiB used: 722.1 MiB (9.1%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting 
           unloaded: fbdev display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.7x15.0") 
           s-diag: 777mm (30.6") 
           Monitor-1: HDMI-1 res: 2560x1440 hz: 60 dpi: 109 size: 597x336mm (23.5x13.2") 
           diag: 685mm (27") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes 
           Sound Server-2: JACK v: 1.9.12 running: no 
           Sound Server-3: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: veth5986dee state: up speed: 10000 Mbps duplex: full mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: ID: hci0 state: down bt-service: enabled, running address:  
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 174.04 GiB used: 27.92 GiB (16.0%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 model: SN64G size: 59.48 GiB block-size: 
           physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Ultra Fit size: 114.56 GiB 
           block-size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 114.31 GiB size: 112.01 GiB (97.99%) used: 14.84 GiB (13.2%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: b2754152-e8ec-4cc4-8898-42b7cc77dd87 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 2F50-B4D6 
           ID-3: /media/pi/boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) 
           fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot 
           uuid: 2F50-B4D6 
           ID-4: /media/pi/rootfs raw-size: 59.22 GiB size: 58.04 GiB (98.01%) 
           used: 12.98 GiB (22.4%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 
           label: rootfs uuid: b2754152-e8ec-4cc4-8898-42b7cc77dd87 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No Unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 1-1.4:3 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA 
           chip-ID: 05e3:0608 class-ID: 0900 
           Hub-4: 1-1.4.2:4 info: ASIX ports: 7 rev: 1.0 speed: 12 Mb/s power: 100mA 
           chip-ID: 0b95:6802 class-ID: 0900 
           Device-1: 1-1.4.X.X:6 info: Sunplus Innovation Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 98mA 
           chip-ID: 1bcf:0005 class-ID: 0301 
           Device-2: 1-1.4.X.X:7 info: China Resource Semico type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 98mA 
           chip-ID: 1a2c:2124 class-ID: 0300 
           Hub-5: 1-1.4.3:5 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA 
           chip-ID: 05e3:0608 class-ID: 0900 
           Hub-6: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: SanDisk Ultra Fit type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 0781:5583 class-ID: 0806 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: 2328 apt: 2321 lib: 1084 snap: 7 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 195 
           1: cpu: 6.2% command: init pid: 1 mem: 8.09 MiB (0.1%) 
           2: cpu: 6.1% command: mongod pid: 461 mem: 37.1 MiB (0.4%) 
           3: cpu: 5.0% command: configurable-http-proxy started by: node pid: 1477 
           mem: 36.0 MiB (0.4%) 
           4: cpu: 4.9% command: xorg pid: 617 mem: 77.1 MiB (0.9%) 
           5: cpu: 4.6% command: jupyterhub started by: python3 pid: 1412 mem: 39.9 MiB (0.5%) 
           Memory top: 5 of 195 
           1: mem: 77.1 MiB (0.9%) command: xorg pid: 617 cpu: 4.9% 
           2: mem: 63.1 MiB (0.8%) command: dockerd pid: 663 cpu: 1.9% 
           3: mem: 48.2 MiB (0.6%) command: raspi_info.txt started by: mousepad pid: 1450 
           cpu: 2.8% 
           4: mem: 39.9 MiB (0.5%) command: jupyterhub started by: python3 pid: 1412 cpu: 4.6% 
           5: mem: 37.1 MiB (0.4%) command: mongod pid: 461 cpu: 6.1% 
Info:      Processes: 195 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.03

Benchmark #43293 - Brand: SanDisk Ultra Fit