Benchmark #43315 - pibenchmarks.com

Brand: Samsung PM410 Series
SSD (2.5" SATA)
#1,347 / 1,680
1
#1,173 / 1,680
#965 / 984
#354 / 370
1,554
	Amazon.com Amazon.ca

Overview
2021-04-04 08:41:20
#43,315
1,554
0 (0.00%)
mario
intel SSD

Storage Details
Samsung PM410 Series
SSD (2.5" SATA)
128G
SSD
Samsung
MMDOE28G5MPP-0VA
2.10
480
2109:2509
0x2109
0x2509 (AES2501)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
23.7 MB/s
32.81 MB/s
32.61 MB/s
1,363 IOPS
2,244 IOPS
5,452 KB/s
8,978 KB/s
10,323 KB/s
10,749 KB/s
8,543 KB/s
5,400 KB/s

inxi Results
System: Kernel: 5.4.51-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=61baf560-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles plymouth.enable=0 Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: b03111 Memory: RAM: total: 1.9 GiB used: 899.1 MiB (46.3%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: modesetting unloaded: fbdev tty: 240x67 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.4.51-v7l+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v4: type: secondary noprefixroute scope: global broadcast: IP v6: type: mngtmpaddr noprefixroute scope: global IP v6: type: noprefixroute scope: global IP v6: type: noprefixroute scope: global IP v6: type: noprefixroute scope: link IF-ID-1: br-edc6bdeb9b3f state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth10b23e1 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth28e1afc state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth709f240 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth73d2943 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth8d63eda state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethae26021 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethb9719ee state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: vethd842b10 state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: vethe292d23 state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: vethfb8b96b state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: vethfe544d8 state: up speed: 10000 Mbps duplex: full mac: IF-ID-15: ztyqbsrvyv state: unknown speed: 10 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: ID: hci0 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 150 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, telephony Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 357.72 GiB used: 10.07 GiB (2.8%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 840 PRO Series family: based SSDs size: 238.47 GiB block-size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: SSD rev: DXM05B0Q temp: 25 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 282d 19h cycles: 13 written: 1.38 TiB ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Samsung model: MMDOE28G5MPP-0VA size: 119.24 GiB block-size: physical: 512 B logical: 512 B rotation: SSD rev: VAM0 scheme: MBR SMART: yes state: enabled health: PASSED on: 3y 353d 0h cycles: 97 Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 118.99 GiB size: 117.09 GiB (98.41%) used: 9.96 GiB (8.5%) fs: ext4 block-size: 4096 B dev: /dev/sdb2 maj-min: 8:18 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 53.3 MiB (21.2%) fs: vfat block-size: 512 B dev: /dev/sdb1 maj-min: 8:17 label: boot uuid: 70A2-8001 ID-3: /media/usb0 raw-size: 256 MiB size: 252 MiB (98.46%) used: 1 KiB (0.0%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 70A2-8001 ID-4: /media/usb1 raw-size: 118.99 GiB size: N/A (hidden?) used: N/A (hidden?) fs: ext4 dev: /dev/sdb2 maj-min: 8:18 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 ID-5: /media/usb2 raw-size: 238.22 GiB size: 233.48 GiB (98.01%) used: 60 MiB (0.0%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 ID-6: /media/usb3 raw-size: 256 MiB size: N/A (hidden?) used: N/A (hidden?) fs: vfat dev: /dev/sdb1 maj-min: 8:17 label: boot uuid: 70A2-8001 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 2.5 MiB (2.5%) priority: -2 file: /var/swap Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.4:3 info: JMicron / JMicron USA JMS539 JMS551 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 152d:2509 class-ID: 0806 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1582 lib: 833 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_12.x buster main 2: deb-src https: //deb.nodesource.com/node_12.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 267 1: cpu: 2.3% command: python3 pid: 6674 mem: 231.6 MiB (12.4%) 2: cpu: 0.9% command: pulseaudio pid: 5944 mem: 6.89 MiB (0.3%) 3: cpu: 0.8% command: zerotier-one pid: 6381 mem: 8.11 MiB (0.4%) 4: cpu: 0.7% command: python3 pid: 3774 mem: 37.3 MiB (1.9%) 5: cpu: 0.5% command: [vchiq-slot/0] pid: 70 mem: 0.00 MiB (0.0%) Memory top: 5 of 267 1: mem: 231.6 MiB (12.4%) command: python3 pid: 6674 cpu: 2.3% 2: mem: 87.1 MiB (4.6%) command: node-red pid: 8233 cpu: 0.5% 3: mem: 65.4 MiB (3.5%) command: dockerd pid: 737 cpu: 0.4% 4: mem: 55.1 MiB (2.9%) command: xorg pid: 640 cpu: 0.3% 5: mem: 40.2 MiB (2.1%) command: docker pid: 3178 cpu: 0.0% Info: Processes: 267 Uptime: 16h 14m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

System:    Kernel: 5.4.51-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 
           video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=61baf560-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles plymouth.enable=0 
           Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: b03111 
           Memory:    RAM: total: 1.9 GiB used: 899.1 MiB (46.3%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.org 1.20.4 driver: loaded: modesetting unloaded: fbdev tty: 240x67 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.4.51-v7l+ running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v4:  type: secondary noprefixroute scope: global broadcast:  
           IP v6:  type: mngtmpaddr noprefixroute scope: global 
           IP v6:  type: noprefixroute scope: global 
           IP v6:  type: noprefixroute scope: global 
           IP v6:  type: noprefixroute scope: link 
           IF-ID-1: br-edc6bdeb9b3f state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth10b23e1 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth28e1afc state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth709f240 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth73d2943 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: veth8d63eda state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: vethae26021 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: vethb9719ee state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: vethd842b10 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-12: vethe292d23 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-13: vethfb8b96b state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-14: vethfe544d8 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-15: ztyqbsrvyv state: unknown speed: 10 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: ID: hci0 state: up address:  bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 
           hci-v: 5.0 rev: 150 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
           service-classes: rendering, capturing, telephony 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 357.72 GiB used: 10.07 GiB (2.8%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 840 PRO Series 
           family: based SSDs size: 238.47 GiB block-size: physical: 512 B logical: 512 B 
           sata: 3.1 speed: 6.0 Gb/s rotation: SSD rev: DXM05B0Q temp: 25 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 282d 19h cycles: 13 written: 1.38 TiB 
           ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Samsung model: MMDOE28G5MPP-0VA 
           size: 119.24 GiB block-size: physical: 512 B logical: 512 B rotation: SSD 
           rev: VAM0 scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 3y 353d 0h cycles: 97 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 118.99 GiB size: 117.09 GiB (98.41%) used: 9.96 GiB (8.5%) fs: ext4 
           block-size: 4096 B dev: /dev/sdb2 maj-min: 8:18 label: rootfs 
           uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 53.3 MiB (21.2%) fs: vfat 
           block-size: 512 B dev: /dev/sdb1 maj-min: 8:17 label: boot uuid: 70A2-8001 
           ID-3: /media/usb0 raw-size: 256 MiB size: 252 MiB (98.46%) used: 1 KiB (0.0%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 70A2-8001 
           ID-4: /media/usb1 raw-size: 118.99 GiB size: N/A (hidden?) used: N/A (hidden?) fs: ext4 
           dev: /dev/sdb2 maj-min: 8:18 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 
           ID-5: /media/usb2 raw-size: 238.22 GiB size: 233.48 GiB (98.01%) used: 60 MiB (0.0%) 
           fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 
           ID-6: /media/usb3 raw-size: 256 MiB size: N/A (hidden?) used: N/A (hidden?) fs: vfat 
           dev: /dev/sdb1 maj-min: 8:17 label: boot uuid: 70A2-8001 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 2.5 MiB (2.5%) priority: -2 file: /var/swap 
Unmounted: Message: No Unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.4:3 info: JMicron / JMicron USA JMS539 JMS551 SATA 3Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           power: 2mA chip-ID: 152d:2509 class-ID: 0806 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa 
           class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 1582 lib: 833 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_12.x buster main
           2: deb-src https: //deb.nodesource.com/node_12.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 267 
           1: cpu: 2.3% command: python3 pid: 6674 mem: 231.6 MiB (12.4%) 
           2: cpu: 0.9% command: pulseaudio pid: 5944 mem: 6.89 MiB (0.3%) 
           3: cpu: 0.8% command: zerotier-one pid: 6381 mem: 8.11 MiB (0.4%) 
           4: cpu: 0.7% command: python3 pid: 3774 mem: 37.3 MiB (1.9%) 
           5: cpu: 0.5% command: [vchiq-slot/0] pid: 70 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 267 
           1: mem: 231.6 MiB (12.4%) command: python3 pid: 6674 cpu: 2.3% 
           2: mem: 87.1 MiB (4.6%) command: node-red pid: 8233 cpu: 0.5% 
           3: mem: 65.4 MiB (3.5%) command: dockerd pid: 737 cpu: 0.4% 
           4: mem: 55.1 MiB (2.9%) command: xorg pid: 640 cpu: 0.3% 
           5: mem: 40.2 MiB (2.1%) command: docker pid: 3178 cpu: 0.0% 
Info:      Processes: 267 Uptime: 16h 14m Init: systemd v: 241 runlevel: 5 
           target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

Benchmark #43315 - Brand: Samsung PM410 Series