Benchmark #43318 - pibenchmarks.com

Brand: Western Digital Scorpio 2.5" HDD
HDD (2.5" SATA)
#124 / 1,539
87
#1,114 / 1,539
#48 / 66
#12 / 20
1,291
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-04-04 09:13:24
#43,318
634
-657 (-103.63%)
rvg
rasp3 hdd berryboot

Storage Details
Western Digital Scorpio 2.5" HDD
HDD (2.5" SATA)
320G
HDD
WDC
WD3200BEVT-75ZCT2
SATA
5,400
2.00
480
0424:2329
0x0424 (Microchip Technology, Inc. (formerly SMSC))
0x2329
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
ARMv7 v7l
4
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
25.2 MB/s
25.96 MB/s
26.25 MB/s
139 IOPS
101 IOPS
557 KB/s
406 KB/s
10,028 KB/s
9,619 KB/s
481 KB/s
1,448 KB/s

inxi Results
System: Host: raspunifi3 Kernel: 5.10.17-v7+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d285d2d2-06 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1000.2 MiB used: 756 MiB (75.6%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org 1.20.4 driver: loaded: fbturbo display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") s-diag: 583mm (23") Monitor-1: default res: 1920x1080 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 class-ID: mmcnr IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::fb71:9816:1c7f:43ab/64 scope: link Device-2: Standard Microsystems type: USB driver: lan78xx bus-ID: 1-1.1.1:6 chip-ID: 0424:7800 class-ID: ff00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::ba53:3c00:662b:1b09/64 scope: link WAN IP: 84.26.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial Report: ID: hci0 state: up address: XX:XX:XX:XX:XX:XX Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 305.49 GiB used: 8.93 GiB (2.9%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SL08G size: 7.4 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Western Digital model: WD3200BEVT-75ZCT2 family: Scorpio Blue Serial ATA size: 298.09 GiB block-size: physical: 512 B logical: 512 B sata: 2.5 speed: 3.0 Gb/s rotation: 5400 rpm WD-WXB0AA926529 rev: 11.0 temp: 39 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 302d 10h cycles: 11799 read: 31.83 TiB written: 25.83 PiB Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 297.99 GiB size: 293.19 GiB (98.39%) used: 8.88 GiB (3.0%) fs: ext4 block-size: 4096 B dev: /dev/sda6 maj-min: 8:6 label: root uuid: 3111581f-d140-48b2-b20f-9984eb400bac ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p6 maj-min: 179:6 label: boot uuid: 1552-21C5 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 99.9 MiB (99.9%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 63 MiB fs: vfat label: RECOVERY uuid: 006B-018F ID-2: /dev/mmcblk0p2 maj-min: 179:2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 maj-min: 179:5 size: 32 MiB fs: ext4 label: SETTINGS uuid: 58f77453-f44b-4d51-a6eb-0a205d8d98da ID-4: /dev/sda1 maj-min: 8:1 size: 63 MiB fs: vfat label: RECOVERY uuid: 133A-5A7F ID-5: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-6: /dev/sda5 maj-min: 8:5 size: 32 MiB fs: ext4 label: SETTINGS uuid: 1b108915-1f3b-490d-8cc6-575ab27243c2 USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Hub-3: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Device-1: 1-1.1.1:6 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 2mA chip-ID: 0424:7800 class-ID: ff00 Device-2: 1-1.2:10 info: HP DeskJet 5550 type: Printer driver: usblp interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 2mA chip-ID: 03f0:6004 class-ID: 0701 Device-3: 1-1.3:9 info: JMicron / JMicron USA JM20329 SATA Bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 152d:2329 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2041 lib: 917 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/100-ubnt-unifi.list 1: deb https://www.ui.com/downloads/unifi/debian stable ubiquiti Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 168 1: cpu: 6.2% command: java pid: 1307 mem: 373.2 MiB (40.3%) 2: cpu: 2.3% command: [kworker/1:2-mm_percpu_wq] pid: 14001 mem: 0.00 MiB (0.0%) 3: cpu: 1.0% command: bin/mongod pid: 1408 mem: 58.6 MiB (6.3%) 4: cpu: 0.9% command: mongod pid: 371 mem: 6.32 MiB (0.6%) 5: cpu: 0.9% command: lxpanel pid: 1066 mem: 32.2 MiB (3.4%) Memory top: 5 of 168 1: mem: 373.2 MiB (40.3%) command: java pid: 1307 cpu: 6.2% 2: mem: 58.6 MiB (6.3%) command: bin/mongod pid: 1408 cpu: 1.0% 3: mem: 36.0 MiB (3.8%) command: xorg pid: 578 cpu: 0.1% 4: mem: 32.2 MiB (3.4%) command: lxpanel pid: 1066 cpu: 0.9% 5: mem: 30.3 MiB (3.2%) command: vncserver-x11-core pid: 493 cpu: 0.0% Info: Processes: 168 Uptime: 3d 13h 15m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) default: Bash v: 5.0.3 running-in: Storage.sh inxi: 3.3.03

inxi Results

System:    Host: raspunifi3 Kernel: 5.10.17-v7+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d285d2d2-06 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory:    RAM: total: 1000.2 MiB used: 756 MiB (75.6%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 4 bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.Org 1.20.4 driver: loaded: fbturbo display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") s-diag: 583mm (23") 
           Monitor-1: default res: 1920x1080 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v7+ running: yes 
           Sound Server-2: JACK v: 1.9.12 running: no 
           Sound Server-3: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 
           class-ID: mmcnr 
           IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::fb71:9816:1c7f:43ab/64 scope: link 
           Device-2: Standard Microsystems type: USB driver: lan78xx bus-ID: 1-1.1.1:6 chip-ID: 0424:7800 
           class-ID: ff00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::ba53:3c00:662b:1b09/64 scope: link 
           WAN IP: 84.26.X.X 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial 
           Report: ID: hci0 state: up address: XX:XX:XX:XX:XX:XX 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 305.49 GiB used: 8.93 GiB (2.9%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SL08G size: 7.4 GiB block-size: physical: 512 B 
           logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Western Digital model: WD3200BEVT-75ZCT2 
           family: Scorpio Blue Serial ATA size: 298.09 GiB block-size: physical: 512 B logical: 512 B sata: 2.5 
           speed: 3.0 Gb/s rotation: 5400 rpm WD-WXB0AA926529 rev: 11.0 temp: 39 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 302d 10h cycles: 11799 read: 31.83 TiB written: 25.83 PiB 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 297.99 GiB size: 293.19 GiB (98.39%) used: 8.88 GiB (3.0%) fs: ext4 block-size: 4096 B 
           dev: /dev/sda6 maj-min: 8:6 label: root uuid: 3111581f-d140-48b2-b20f-9984eb400bac 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B 
           dev: /dev/mmcblk0p6 maj-min: 179:6 label: boot uuid: 1552-21C5 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 99.9 MiB (99.9%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 63 MiB fs: vfat label: RECOVERY uuid: 006B-018F 
           ID-2: /dev/mmcblk0p2 maj-min: 179:2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 maj-min: 179:5 size: 32 MiB fs: ext4 label: SETTINGS 
           uuid: 58f77453-f44b-4d51-a6eb-0a205d8d98da 
           ID-4: /dev/sda1 maj-min: 8:1 size: 63 MiB fs: vfat label: RECOVERY uuid: 133A-5A7F 
           ID-5: /dev/sda2 maj-min: 8:2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-6: /dev/sda5 maj-min: 8:5 size: 32 MiB fs: ext4 label: SETTINGS 
           uuid: 1b108915-1f3b-490d-8cc6-575ab27243c2 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 
           class-ID: 0900 
           Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 2mA 
           chip-ID: 0424:2514 class-ID: 0900 
           Hub-3: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s power: 2mA 
           chip-ID: 0424:2514 class-ID: 0900 
           Device-1: 1-1.1.1:6 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 
           speed: 480 Mb/s power: 2mA chip-ID: 0424:7800 class-ID: ff00 
           Device-2: 1-1.2:10 info: HP DeskJet 5550 type: Printer driver: usblp interfaces: 1 rev: 2.0 
           speed: 12 Mb/s power: 2mA chip-ID: 03f0:6004 class-ID: 0701 
           Device-3: 1-1.3:9 info: JMicron / JMicron USA JM20329 SATA Bridge type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 152d:2329 class-ID: 0806 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 2041 lib: 917 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/100-ubnt-unifi.list 
           1: deb https://www.ui.com/downloads/unifi/debian stable ubiquiti
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 168 
           1: cpu: 6.2% command: java pid: 1307 mem: 373.2 MiB (40.3%) 
           2: cpu: 2.3% command: [kworker/1:2-mm_percpu_wq] pid: 14001 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.0% command: bin/mongod pid: 1408 mem: 58.6 MiB (6.3%) 
           4: cpu: 0.9% command: mongod pid: 371 mem: 6.32 MiB (0.6%) 
           5: cpu: 0.9% command: lxpanel pid: 1066 mem: 32.2 MiB (3.4%) 
           Memory top: 5 of 168 
           1: mem: 373.2 MiB (40.3%) command: java pid: 1307 cpu: 6.2% 
           2: mem: 58.6 MiB (6.3%) command: bin/mongod pid: 1408 cpu: 1.0% 
           3: mem: 36.0 MiB (3.8%) command: xorg pid: 578 cpu: 0.1% 
           4: mem: 32.2 MiB (3.4%) command: lxpanel pid: 1066 cpu: 0.9% 
           5: mem: 30.3 MiB (3.2%) command: vncserver-x11-core pid: 493 cpu: 0.0% 
Info:      Processes: 168 Uptime: 3d 13h 15m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) default: Bash v: 5.0.3 
           running-in: Storage.sh inxi: 3.3.03

Benchmark #43318 - Brand: Western Digital Scorpio 2.5" HDD