Benchmark #43329 - pibenchmarks.com

Brand: Transcend SSD200 Series
SSD (2.5" SATA)
#206 / 1,539
49
#615 / 1,539
#592 / 875
#196 / 363
5,678
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-04-04 15:31:09
#43,329
2,441
-3,237 (-132.61%)
nt
nothugn

Storage Details
Transcend SSD200 Series
SSD (2.5" SATA)
240G
SSD
Transcend
TS240GSSD220S
2.5 inch
SATA
2.00
480
2109:0578
0x2109
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
29 MB/s
29.25 MB/s
29.31 MB/s
3,735 IOPS
3,281 IOPS
14,940 KB/s
13,126 KB/s
11,413 KB/s
9,214 KB/s
9,425 KB/s
10,565 KB/s

inxi Results
System: Kernel: 5.10.25-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=73993d10-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 Memory: RAM: total: 7.76 GiB used: 525 MiB (6.6%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 102 size: 477x268mm (18.8x10.6") diag: 547mm (21.5") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.25-v7l+ running: yes Sound Server-2: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: ID: hci0 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 223.57 GiB used: 3.45 GiB (1.5%) ID-1: /dev/sda maj-min: 8:0 type: USB model: External USB3.0 drive model: TS240GSSD220S family: based SSDs size: 223.57 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rotation: SSD rev: 0204 drive rev: S0628A0 temp: 45 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1 hrs cycles: 56 read: 3.84 GiB written: 31.34 GiB Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 223.32 GiB size: 218.81 GiB (97.98%) used: 3.4 GiB (1.6%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 3857a514-b0f4-49ce-8430-34762068bb6f ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.8 MiB (19.0%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 8D64-2011 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.2:6 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 093a:2510 class-ID: 0301 Device-2: 1-1.3:3 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA chip-ID: 152d:0578 class-ID: 0806 Hub-3: 1-1.4:4 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 05e3:0610 class-ID: 0900 Device-1: 1-1.4.1:5 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0006 class-ID: 0300 Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1393 lib: 685 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 157 1: cpu: 1.1% command: init pid: 1 mem: 8.24 MiB (0.1%) 2: cpu: 1.1% command: [kworker/u8:3-events_unbound] pid: 1464 mem: 0.00 MiB (0.0%) 3: cpu: 0.8% command: [kworker/u8:1-events_unbound] pid: 1327 mem: 0.00 MiB (0.0%) 4: cpu: 0.7% command: xorg pid: 517 mem: 63.0 MiB (0.7%) 5: cpu: 0.5% command: [kworker/1:2+events_freezable] pid: 77 mem: 0.00 MiB (0.0%) Memory top: 5 of 157 1: mem: 63.0 MiB (0.7%) command: xorg pid: 517 cpu: 0.7% 2: mem: 28.5 MiB (0.3%) command: lxpanel pid: 620 cpu: 0.2% 3: mem: 27.2 MiB (0.3%) command: lxterminal pid: 1154 cpu: 0.3% 4: mem: 27.0 MiB (0.3%) command: applet.py started by: python3 pid: 643 cpu: 0.1% 5: mem: 21.2 MiB (0.2%) command: pcmanfm pid: 621 cpu: 0.1% Info: Processes: 157 Uptime: 9m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

System:    Kernel: 5.10.25-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=73993d10-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 
           Memory:    RAM: total: 7.76 GiB used: 525 MiB (6.6%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting 
           unloaded: fbdev display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 102 size: 477x268mm (18.8x10.6") 
           diag: 547mm (21.5") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.25-v7l+ running: yes 
           Sound Server-2: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: down mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: ID: hci0 state: up address:  bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 
           hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
           service-classes: rendering, capturing 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 223.57 GiB used: 3.45 GiB (1.5%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB model: External USB3.0 drive model: TS240GSSD220S 
           family: based SSDs size: 223.57 GiB block-size: physical: 512 B logical: 512 B 
           sata: 3.2 speed: 6.0 Gb/s rotation: SSD rev: 0204 drive rev: S0628A0 temp: 45 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1 hrs cycles: 56 read: 3.84 GiB 
           written: 31.34 GiB 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 223.32 GiB size: 218.81 GiB (97.98%) used: 3.4 GiB (1.6%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: 3857a514-b0f4-49ce-8430-34762068bb6f 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.8 MiB (19.0%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 8D64-2011 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No Unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.2:6 info: Pixart Imaging Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA 
           chip-ID: 093a:2510 class-ID: 0301 
           Device-2: 1-1.3:3 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA 
           chip-ID: 152d:0578 class-ID: 0806 Hub-3: 1-1.4:4 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           power: 100mA chip-ID: 05e3:0610 class-ID: 0900 
           Device-1: 1-1.4.1:5 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0006 class-ID: 0300 
           Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 1393 lib: 685 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 157 
           1: cpu: 1.1% command: init pid: 1 mem: 8.24 MiB (0.1%) 
           2: cpu: 1.1% command: [kworker/u8:3-events_unbound] pid: 1464 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.8% command: [kworker/u8:1-events_unbound] pid: 1327 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.7% command: xorg pid: 517 mem: 63.0 MiB (0.7%) 
           5: cpu: 0.5% command: [kworker/1:2+events_freezable] pid: 77 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 157 
           1: mem: 63.0 MiB (0.7%) command: xorg pid: 517 cpu: 0.7% 
           2: mem: 28.5 MiB (0.3%) command: lxpanel pid: 620 cpu: 0.2% 
           3: mem: 27.2 MiB (0.3%) command: lxterminal pid: 1154 cpu: 0.3% 
           4: mem: 27.0 MiB (0.3%) command: applet.py started by: python3 pid: 643 cpu: 0.1% 
           5: mem: 21.2 MiB (0.2%) command: pcmanfm pid: 621 cpu: 0.1% 
Info:      Processes: 157 Uptime: 9m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.03

Benchmark #43329 - Brand: Transcend SSD200 Series