Benchmark #43354 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#2 / 1,539
1,343
#571 / 1,539
#550 / 875
#172 / 363
5,919
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-04-05 10:08:44
#43,354
5,638
-281 (-4.98%)
patatje
ssd SANdisk 2e maal

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
120G
SSD
SanDisk
SSDPLUS120GB
2.5 inch
SATA
3.00
5,000
152d:0562
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0562 (Netac Portable SSD Z6s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
162 MB/s
309.55 MB/s
236.01 MB/s
8,579 IOPS
16,062 IOPS
34,319 KB/s
64,250 KB/s
13,955 KB/s
15,443 KB/s
13,892 KB/s
16,291 KB/s

inxi Results
System: Host: raspberrypi4ssd Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=74141a18-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: b03111 Memory: RAM: total: 1.9 GiB used: 373.2 MiB (19.2%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org 1.20.4 driver: loaded: fbturbo display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") s-diag: 583mm (23") Monitor-1: default res: 1920x1080 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::41a8:92b1:de2e:7f43/64 scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::a53:3bb4:bb8d:3328/64 scope: link WAN IP: 84.26.X.X Bluetooth: Message: No Bluetooth data was found. Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 111.8 GiB used: 7.53 GiB (6.7%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: SSD PLUS 120GB size: 111.8 GiB block-size: physical: 4096 B logical: 512 B rotation: SSD rev: 0214 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 111.54 GiB size: 109.75 GiB (98.40%) used: 7.48 GiB (6.8%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: b2754152-e8ec-4cc4-8898-42b7cc77dd87 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 2F50-B4D6 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.3:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 05e3:0610 class-ID: 0900 Device-1: 1-1.3.1:4 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0006 class-ID: 0300 Device-2: 1-1.3.4:5 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 093a:2510 class-ID: 0301 Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 152d:0562 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2044 lib: 921 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 163 1: cpu: 1.1% command: packagekitd pid: 2997 mem: 13.0 MiB (0.6%) 2: cpu: 1.0% command: vncserver-x11-core pid: 467 mem: 32.1 MiB (1.7%) 3: cpu: 0.9% command: xorg pid: 529 mem: 62.3 MiB (3.3%) 4: cpu: 0.8% command: lxpanel pid: 676 mem: 29.4 MiB (1.5%) 5: cpu: 0.6% command: [kworker/0:1+events_freezable] pid: 32 mem: 0.00 MiB (0.0%) Memory top: 5 of 163 1: mem: 62.3 MiB (3.3%) command: xorg pid: 529 cpu: 0.9% 2: mem: 49.6 MiB (2.6%) command: lxterminal pid: 1130 cpu: 0.5% 3: mem: 32.1 MiB (1.7%) command: vncserver-x11-core pid: 467 cpu: 1.0% 4: mem: 29.4 MiB (1.5%) command: lxpanel pid: 676 cpu: 0.8% 5: mem: 28.9 MiB (1.5%) command: applet.py started by: python3 pid: 734 cpu: 0.1% Info: Processes: 163 Uptime: 12m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) default: Bash v: 5.0.3 running-in: Storage.sh inxi: 3.3.03

inxi Results

System:    Host: raspberrypi4ssd Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=74141a18-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: b03111 
Memory:    RAM: total: 1.9 GiB used: 373.2 MiB (19.2%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.Org 1.20.4 driver: loaded: fbturbo display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") s-diag: 583mm (23") 
           Monitor-1: default res: 1920x1080 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes 
           Sound Server-2: JACK v: 1.9.12 running: no 
           Sound Server-3: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::41a8:92b1:de2e:7f43/64 scope: link 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::a53:3bb4:bb8d:3328/64 scope: link 
           WAN IP: 84.26.X.X 
Bluetooth: Message: No Bluetooth data was found. 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 111.8 GiB used: 7.53 GiB (6.7%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: SSD PLUS 120GB size: 111.8 GiB block-size: 
           physical: 4096 B logical: 512 B rotation: SSD rev: 0214 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 111.54 GiB size: 109.75 GiB (98.40%) used: 7.48 GiB (6.8%) fs: ext4 block-size: 4096 B 
           dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: b2754152-e8ec-4cc4-8898-42b7cc77dd87 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B 
           dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 2F50-B4D6 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No Unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 1-1.3:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 05e3:0610 
           class-ID: 0900 
           Device-1: 1-1.3.1:4 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 
           speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0006 class-ID: 0300 
           Device-2: 1-1.3.4:5 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 
           rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 093a:2510 class-ID: 0301 
           Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           power: 896mA chip-ID: 152d:0562 class-ID: 0806 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 2044 lib: 921 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 163 
           1: cpu: 1.1% command: packagekitd pid: 2997 mem: 13.0 MiB (0.6%) 
           2: cpu: 1.0% command: vncserver-x11-core pid: 467 mem: 32.1 MiB (1.7%) 
           3: cpu: 0.9% command: xorg pid: 529 mem: 62.3 MiB (3.3%) 
           4: cpu: 0.8% command: lxpanel pid: 676 mem: 29.4 MiB (1.5%) 
           5: cpu: 0.6% command: [kworker/0:1+events_freezable] pid: 32 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 163 
           1: mem: 62.3 MiB (3.3%) command: xorg pid: 529 cpu: 0.9% 
           2: mem: 49.6 MiB (2.6%) command: lxterminal pid: 1130 cpu: 0.5% 
           3: mem: 32.1 MiB (1.7%) command: vncserver-x11-core pid: 467 cpu: 1.0% 
           4: mem: 29.4 MiB (1.5%) command: lxpanel pid: 676 cpu: 0.8% 
           5: mem: 28.9 MiB (1.5%) command: applet.py started by: python3 pid: 734 cpu: 0.1% 
Info:      Processes: 163 Uptime: 12m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: 
           gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) default: Bash v: 5.0.3 running-in: Storage.sh inxi: 3.3.03

Benchmark #43354 - Brand: SanDisk SSD Plus