Benchmark #43659 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SC16G)
A1 C10 U1
#7 / 1,539
884
#1,218 / 1,539
#202 / 369
1,084
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-04-10 04:58:28
#43,659
1,097
+13 (+1.19%)
ntstorage01

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SC16G)
A1 C10 U1
14.6G
SD
SanDisk
SC16G
SDHC
5.00
0x03
SD
8.0
08/2020
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
1,600
42 (-9)

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
13.5 MB/s
40.71 MB/s
27.74 MB/s
792 IOPS
3,024 IOPS
3,168 KB/s
12,098 KB/s
9,892 KB/s
3,437 KB/s
8,481 KB/s
2,912 KB/s

inxi Results
System: Kernel: 5.10.0-0.bpo.4-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0 parameters: video=HDMI-A-1:1280x720M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x943a7565 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw fsck.repair=yes net.ifnames=0 rootwait Console: tty pts/0 DM: LightDM 1.26.0 Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Memory: RAM: total: 7.63 GiB used: 532.1 MiB (6.8%) RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 bogomips: 432 Speed: 800 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: X.org 1.20.4 driver: loaded: modesetting unloaded: fbdev tty: 157x66 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-0.bpo.4-arm64 running: yes Sound Server-2: PulseAudio v: 12.2 running: no Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: wlan0 state: up mac: IP v4: scope: global broadcast: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 14.84 GiB used: 2.97 GiB (20.0%) ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: SanDisk model: SC16G size: 14.84 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 14.54 GiB size: 14.3 GiB (98.31%) used: 2.84 GiB (19.9%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT uuid: 3afa1322-78ce-432e-8cf6-85c7c878a596 ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 130.2 MiB (43.6%) fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM uuid: 1E48-B72B Swap: Alert: No Swap data was found. Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.2:3 info: VIA Labs ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 2109:2815 class-ID: 0900 Device-1: 1-1.3:4 info: HP KU-0316 Keyboard type: Keyboard driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 03f0:0024 class-ID: 0301 Device-2: 1-1.4:5 info: Logitech M105 Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 046d:c077 class-ID: 0301 Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Hub-5: 2-2:2 info: VIA Labs ports: 4 rev: 3.2 speed: 5 Gb/s chip-ID: 2109:0815 class-ID: 0900 Device-1: 2-2.1:3 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 2109:0711 class-ID: 0806 Device-2: 2-2.2:4 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 2109:0711 class-ID: 0806 Device-3: 2-2.3:5 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 2109:0711 class-ID: 0806 Device-4: 2-2.4:6 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 2109:0711 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1123 lib: 656 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian buster main contrib non-free 2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free 3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's Processes: CPU top: 5 of 169 1: cpu: 2.1% command: init pid: 1 mem: 9.09 MiB (0.1%) 2: cpu: 0.5% command: lightdm-gtk-greeter pid: 1100 mem: 73.2 MiB (0.9%) 3: cpu: 0.3% command: python pid: 425 mem: 17.9 MiB (0.2%) 4: cpu: 0.2% command: python3 pid: 678 mem: 22.2 MiB (0.2%) 5: cpu: 0.2% command: xorg pid: 738 mem: 49.3 MiB (0.6%) Memory top: 5 of 169 1: mem: 73.2 MiB (0.9%) command: lightdm-gtk-greeter pid: 1100 cpu: 0.5% 2: mem: 49.3 MiB (0.6%) command: xorg pid: 738 cpu: 0.2% 3: mem: 22.2 MiB (0.2%) command: python3 pid: 678 cpu: 0.2% 4: mem: 17.9 MiB (0.2%) command: python pid: 425 cpu: 0.3% 5: mem: 15.8 MiB (0.2%) command: python pid: 744 cpu: 0.1% Info: Processes: 169 Uptime: 4m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

System:    Kernel: 5.10.0-0.bpo.4-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: video=HDMI-A-1:1280x720M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x943a7565 
           bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw 
           fsck.repair=yes net.ifnames=0 rootwait 
           Console: tty pts/0 DM: LightDM 1.26.0 Distro: Debian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Memory:    RAM: total: 7.63 GiB used: 532.1 MiB (6.8%) 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: N/A stepping: 3 bogomips: 432 
           Speed: 800 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 
           class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 
           class-ID: hdmi 
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Display: server: X.org 1.20.4 driver: loaded: modesetting unloaded: fbdev tty: 157x66 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 
           class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 
           class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.0-0.bpo.4-arm64 running: yes 
           Sound Server-2: PulseAudio v: 12.2 running: no 
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A 
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq 
           IF-ID-1: wlan0 state: up mac:  
           IP v4:  scope: global broadcast:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: This feature requires one of these tools: hciconfig/bt-adapter 
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 14.84 GiB used: 2.97 GiB (20.0%) 
           ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: SanDisk model: SC16G size: 14.84 GiB 
           block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 14.54 GiB size: 14.3 GiB (98.31%) used: 2.84 GiB (19.9%) fs: ext4 
           block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT 
           uuid: 3afa1322-78ce-432e-8cf6-85c7c878a596 
           ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 130.2 MiB (43.6%) 
           fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM 
           uuid: 1E48-B72B 
Swap:      Alert: No Swap data was found. 
Unmounted: Message: No Unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 1-1.2:3 info: VIA Labs ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 2109:2815 
           class-ID: 0900 
           Device-1: 1-1.3:4 info: HP KU-0316 Keyboard type: Keyboard driver: hid-generic,usbhid 
           interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 03f0:0024 class-ID: 0301 
           Device-2: 1-1.4:5 info: Logitech M105 Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA 
           chip-ID: 046d:c077 class-ID: 0301 
           Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Hub-5: 2-2:2 info: VIA Labs ports: 4 rev: 3.2 speed: 5 Gb/s chip-ID: 2109:0815 
           class-ID: 0900 
           Device-1: 2-2.1:3 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 2109:0711 class-ID: 0806 Device-2: 2-2.2:4 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 2109:0711 class-ID: 0806 Device-3: 2-2.3:5 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 2109:0711 class-ID: 0806 Device-4: 2-2.4:6 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 2109:0711 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 1123 lib: 656 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian buster main contrib non-free
           2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free
           3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's
Processes: CPU top: 5 of 169 
           1: cpu: 2.1% command: init pid: 1 mem: 9.09 MiB (0.1%) 
           2: cpu: 0.5% command: lightdm-gtk-greeter pid: 1100 mem: 73.2 MiB (0.9%) 
           3: cpu: 0.3% command: python pid: 425 mem: 17.9 MiB (0.2%) 
           4: cpu: 0.2% command: python3 pid: 678 mem: 22.2 MiB (0.2%) 
           5: cpu: 0.2% command: xorg pid: 738 mem: 49.3 MiB (0.6%) 
           Memory top: 5 of 169 
           1: mem: 73.2 MiB (0.9%) command: lightdm-gtk-greeter pid: 1100 cpu: 0.5% 
           2: mem: 49.3 MiB (0.6%) command: xorg pid: 738 cpu: 0.2% 
           3: mem: 22.2 MiB (0.2%) command: python3 pid: 678 cpu: 0.2% 
           4: mem: 17.9 MiB (0.2%) command: python pid: 425 cpu: 0.3% 
           5: mem: 15.8 MiB (0.2%) command: python pid: 744 cpu: 0.1% 
Info:      Processes: 169 Uptime: 4m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: 
           gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

Benchmark #43659 - Brand: SanDisk SD Ultra A1 (SC16G)